First release for Function Pack examples

LICENSE.md

@@ -0,0 +1,23 @@
+COPYRIGHT(c) 2017 STMicroelectronics
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+  1. Redistributions of source code must retain the above copyright notice,
+     this list of conditions and the following disclaimer.
+  2. Redistributions in binary form must reproduce the above copyright notice,
+     this list of conditions and the following disclaimer in the documentation
+     and/or other materials provided with the distribution.
+  3. Neither the name of STMicroelectronics nor the names of its contributors
+     may be used to endorse or promote products derived from this software
+     without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

README.md

@@ -1,2 +1,62 @@
 # FP_Examples
-Function Pack software: Examples that combine the usage of multiple X-NUCLEO boards 
+
+This library provides several Function Packs that combine the usage of several X-NUCLEO boards together with a NUCLEO board.
+
+## Examples
+
+There are several examples with the FP_Examples library.
+* NucleoCar: This application provides a funny example of usage of a NUCLEO board (it was tested with NUCLEO-F401RE) with 
+X-NUCLEO-IDB05A1, X-NUCLEO-IHM02A1 and X-NUCLEO-6180XA1 Expansion Boards. The application implements two operative modes. With the 
+first mode the car can move using the main VL6180X sensor; the closer we put the hand on the sensor, the higher is the speed of the car. 
+The VL6180X satellites instead are used to avoid the obstacles. With the second mode the car can be controlled via BTLE using a dedicated 
+Android App. Also in this case the VL6180X satellites try to avoid the obstacles. In order to change the car mode, you can push the User 
+Button of the Nucleo board.
+* GestureDirSwipeLed_53L0A1_LED61A1: This application provides a simple example of usage of a NUCLEO board (it was tested with NUCLEO-L476RG) 
+with X-NUCLEO-53L0A1 and X-NUCLEO-LED61A1 Expansion Boards. The application allows to switch on/off a strip of LEDs keeping the hand on the 3
+proximity sensors at least for 3 seconds. When the LEDs are switched on, the user can increase or decrease the intensity of the LEDs performing
+a swipe movement respectively from left to right and from right to left.
+* MemsMotorControl_IKS01A2_IHM02A1: This application provides a simple example of usage of a NUCLEO board (it was tested with NUCLEO-F401RE) 
+with X-NUCLEO-IKS01A2 and X-NUCLEO-IHM02A1 Expansion Boards. The application allows to run a motor clockwise or counter-clockwise rotating the 
+stack of boards accordingly; the speed of motor increases when the angle of rotation increases as well. 
+
+
+## Dependencies
+
+The FP_Examples library requires the following STM32duino libraries:
+
+* STM32duino LSM6DSL: https://github.com/stm32duino/LSM6DSL
+* STM32duino Proximity_Gesture: https://github.com/stm32duino/Proximity_Gesture
+* STM32duino VL6180X: https://github.com/stm32duino/VL6180X
+* STM32duino VL53L0X: https://github.com/stm32duino/VL53L0X
+* STM32duino SPBTLE-RF: https://github.com/stm32duino/SPBTLE-RF
+* STM32duino X-NUCLEO-6180XA1: https://github.com/stm32duino/X-NUCLEO-6180XA1
+* STM32duino X-NUCLEO-53L0A1: https://github.com/stm32duino/X-NUCLEO-53L0A1
+* STM32duino X-NUCLEO-IHM02A1: https://github.com/stm32duino/X-NUCLEO-IHM02A1
+* STM32duino X-NUCLEO-LED61A1: https://github.com/stm32duino/X-NUCLEO-LED61A1
+
+
+## Documentation
+
+You can find the source files at  
+https://github.com/stm32duino/LSM6DSL
+https://github.com/stm32duino/Proximity_Gesture
+https://github.com/stm32duino/VL6180X
+https://github.com/stm32duino/VL53L0X
+https://github.com/stm32duino/SPBTLE-RF
+https://github.com/stm32duino/X-NUCLEO-6180XA1
+https://github.com/stm32duino/X-NUCLEO-53L0A1
+https://github.com/stm32duino/X-NUCLEO-IHM02A1
+https://github.com/stm32duino/X-NUCLEO-LED61A1
+
+The datasheets of the several components are available at  
+http://www.st.com/content/st_com/en/products/mems-and-sensors/inemo-inertial-modules/lsm6dsl.html
+http://www.st.com/content/st_com/en/products/imaging-and-photonics-solutions/proximity-sensors/vl6180x.html
+http://www.st.com/content/st_com/en/products/imaging-and-photonics-solutions/proximity-sensors/vl53l0x.html
+http://www.st.com/content/st_com/en/products/wireless-connectivity/bluetooth-bluetooth-low-energy/spbtle-rf.html
+http://www.st.com/content/st_com/en/products/motor-drivers/stepper-motor-drivers/l6470.html
+http://www.st.com/content/st_com/en/products/power-management/led-drivers/boost-current-regulators-for-led/led6001.html
+
+
+
+
+