Skip to content

Add SharkyMKR from Midatronics #614

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Merged
merged 1 commit into from
Aug 28, 2019
Merged

Add SharkyMKR from Midatronics #614

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
4 changes: 4 additions & 0 deletions README.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -136,6 +136,10 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
| :---: | --- | :---: | :--- |
| :green_heart: | [Sparky V1](https://github.com/TauLabs/TauLabs/wiki/Sparky) | *1.6.0* | |

| Status | [Midatronics](https://midatronics.com/) | Release | Comment |
| :---: | --- | :---: | :--- |
| :yellow_heart: | [SharkyMKR](https://midatronics.com/Development_Boards/MKR_Sharky_I) | **1.7.0** | |

## Next release

See [milestones](https://github.com/stm32duino/Arduino_Core_STM32/milestones) to have an overview of the next release content.
Expand Down
89 changes: 89 additions & 0 deletions boards.txt
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -1143,6 +1143,48 @@ RAK.menu.upload_method.dfuMethod.upload.tool=stm32CubeProg
3dprinter.menu.upload_method.dfuMethod.upload.options=-g
3dprinter.menu.upload_method.dfuMethod.upload.tool=stm32CubeProg

################################################################################
# Midatronics boards

Midatronics.name=Midatronics boards

Midatronics.build.vid=0x0483
Midatronics.build.core=arduino
Midatronics.build.board=Midatronics
Midatronics.build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial}

# MKR_SHARKY board
Midatronics.menu.pnum.MKR_SHARKY=MKR Sharky
Midatronics.menu.pnum.MKR_SHARKY.node=NODE_WB55CE
Midatronics.menu.pnum.MKR_SHARKY.upload.maximum_size=524288
Midatronics.menu.pnum.MKR_SHARKY.upload.maximum_data_size=196604
Midatronics.menu.pnum.MKR_SHARKY.build.mcu=cortex-m4 -mfpu=fpv4-sp-d16 -mfloat-abi=hard
Midatronics.menu.pnum.MKR_SHARKY.build.board=MKR_SHARKY
Midatronics.menu.pnum.MKR_SHARKY.build.series=STM32WBxx
Midatronics.menu.pnum.MKR_SHARKY.build.product_line=STM32WB55xx
Midatronics.menu.pnum.MKR_SHARKY.build.variant=MKR_SHARKY
Midatronics.menu.pnum.MKR_SHARKY.build.cmsis_lib_gcc=arm_cortexM4l_math

# Upload menu
Midatronics.menu.upload_method.MassStorage=Mass Storage
Midatronics.menu.upload_method.MassStorage.upload.protocol=
Midatronics.menu.upload_method.MassStorage.upload.tool=massStorageCopy

Midatronics.menu.upload_method.swdMethod=STM32CubeProgrammer (SWD)
Midatronics.menu.upload_method.swdMethod.upload.protocol=0
Midatronics.menu.upload_method.swdMethod.upload.options=-g
Midatronics.menu.upload_method.swdMethod.upload.tool=stm32CubeProg

Midatronics.menu.upload_method.serialMethod=STM32CubeProgrammer (Serial)
Midatronics.menu.upload_method.serialMethod.upload.protocol=1
Midatronics.menu.upload_method.serialMethod.upload.options={serial.port.file} -s
Midatronics.menu.upload_method.serialMethod.upload.tool=stm32CubeProg

Midatronics.menu.upload_method.dfuMethod=STM32CubeProgrammer (DFU)
Midatronics.menu.upload_method.dfuMethod.upload.protocol=2
Midatronics.menu.upload_method.dfuMethod.upload.options=-g
Midatronics.menu.upload_method.dfuMethod.upload.tool=stm32CubeProg

################################################################################
# Serialx activation
Nucleo_144.menu.xserial.generic=Enabled (generic 'Serial')
Expand Down Expand Up @@ -1217,6 +1259,12 @@ RAK.menu.xserial.disabled.build.xSerial=
3dprinter.menu.xserial.disabled=Disabled (no Serial support)
3dprinter.menu.xserial.disabled.build.xSerial=

Midatronics.menu.xserial.generic=Enabled (generic 'Serial')
Midatronics.menu.xserial.none=Enabled (no generic 'Serial')
Midatronics.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
Midatronics.menu.xserial.disabled=Disabled (No Serial support)
Midatronics.menu.xserial.disabled.build.xSerial=

# USB connectivity
Nucleo_144.menu.usb.none=None
Nucleo_144.menu.usb.CDCgen=CDC (generic 'Serial' supersede U(S)ART)
Expand Down Expand Up @@ -1344,6 +1392,19 @@ Sparky.menu.xusb.HSFS.build.usb_speed=-DUSE_USB_HS -DUSE_USB_HS_IN_FS
3dprinter.menu.xusb.HSFS=High Speed in Full Speed mode
3dprinter.menu.xusb.HSFS.build.usb_speed=-DUSE_USB_HS -DUSE_USB_HS_IN_FS

Midatronics.menu.usb.none=None
Midatronics.menu.usb.CDCgen=CDC (generic 'Serial' supersede U(S)ART)
Midatronics.menu.usb.CDCgen.build.enable_usb={build.usb_flags} -DUSBD_USE_CDC
Midatronics.menu.usb.CDC=CDC (no generic 'Serial')
Midatronics.menu.usb.CDC.build.enable_usb={build.usb_flags} -DUSBD_USE_CDC -DDISABLE_GENERIC_SERIALUSB
Midatronics.menu.usb.HID=HID (keyboard and mouse)
Midatronics.menu.usb.HID.build.enable_usb={build.usb_flags} -DUSBD_USE_HID_COMPOSITE
Midatronics.menu.xusb.FS=Low/Full Speed
Midatronics.menu.xusb.HS=High Speed
Midatronics.menu.xusb.HS.build.usb_speed=-DUSE_USB_HS
Midatronics.menu.xusb.HSFS=High Speed in Full Speed mode
Midatronics.menu.xusb.HSFS.build.usb_speed=-DUSE_USB_HS -DUSE_USB_HS_IN_FS

# Optimizations
Nucleo_144.menu.opt.osstd=Smallest (-Os default)
Nucleo_144.menu.opt.oslto=Smallest (-Os) with LTO
Expand Down Expand Up @@ -1563,6 +1624,24 @@ RAK.menu.opt.ogstd.build.flags.optimize=-g -Og
3dprinter.menu.opt.ogstd=Debug (-g)
3dprinter.menu.opt.ogstd.build.flags.optimize=-g -Og

Midatronics.menu.opt.osstd=Smallest (-Os default)
Midatronics.menu.opt.oslto=Smallest (-Os) with LTO
Midatronics.menu.opt.oslto.build.flags.optimize=-Os -flto
Midatronics.menu.opt.o1std=Fast (-O1)
Midatronics.menu.opt.o1std.build.flags.optimize=-O1
Midatronics.menu.opt.o1lto=Fast (-O1) with LTO
Midatronics.menu.opt.o1lto.build.flags.optimize=-O1 -flto
Midatronics.menu.opt.o2std=Faster (-O2)
Midatronics.menu.opt.o2std.build.flags.optimize=-O2
Midatronics.menu.opt.o2lto=Faster (-O2) with LTO
Midatronics.menu.opt.o2lto.build.flags.optimize=-O2 -flto
Midatronics.menu.opt.o3std=Fastest (-O3)
Midatronics.menu.opt.o3std.build.flags.optimize=-O3
Midatronics.menu.opt.o3lto=Fastest (-O3) with LTO
Midatronics.menu.opt.o3lto.build.flags.optimize=-O3 -flto
Midatronics.menu.opt.ogstd=Debug (-g)
Midatronics.menu.opt.ogstd.build.flags.optimize=-g -Og

# C Runtime Library
Nucleo_144.menu.rtlib.nano=Newlib Nano (default)
Nucleo_144.menu.rtlib.nanofp=Newlib Nano + Float Printf
Expand Down Expand Up @@ -1683,3 +1762,13 @@ RAK.menu.rtlib.full.build.flags.ldspecs=
3dprinter.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float -u _scanf_float
3dprinter.menu.rtlib.full=Newlib Standard
3dprinter.menu.rtlib.full.build.flags.ldspecs=

Midatronics.menu.rtlib.nano=Newlib Nano (default)
Midatronics.menu.rtlib.nanofp=Newlib Nano + Float Printf
Midatronics.menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float
Midatronics.menu.rtlib.nanofs=Newlib Nano + Float Scanf
Midatronics.menu.rtlib.nanofs.build.flags.ldspecs=--specs=nano.specs -u _scanf_float
Midatronics.menu.rtlib.nanofps=Newlib Nano + Float Printf/Scanf
Midatronics.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float -u _scanf_float
Midatronics.menu.rtlib.full=Newlib Standard
Midatronics.menu.rtlib.full.build.flags.ldspecs=
204 changes: 204 additions & 0 deletions variants/MKR_SHARKY/PeripheralPins.c
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1,204 @@
/*
*******************************************************************************
* Copyright (c) 2019, STMicroelectronics
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
*******************************************************************************
* Automatically generated from STM32WB55CEUx.xml
*/
#include "Arduino.h"
#include "PeripheralPins.h"

/* =====
* Note: Commented lines are alternative possibilities which are not used per default.
* If you change them, you will have to know what you do
* =====
*/

//*** ADC ***

#ifdef HAL_ADC_MODULE_ENABLED
WEAK const PinMap PinMap_ADC[] = {
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
// {PA_8, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
// {PA_9, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_IN16
{NC, NP, 0}
};
#endif

//*** No DAC ***

//*** I2C ***

#ifdef HAL_I2C_MODULE_ENABLED
WEAK const PinMap PinMap_I2C_SDA[] = {
{PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_I2C_MODULE_ENABLED
WEAK const PinMap PinMap_I2C_SCL[] = {
{PA_7, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
{PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{NC, NP, 0}
};
#endif

//*** PWM ***

#ifdef HAL_TIM_MODULE_ENABLED
WEAK const PinMap PinMap_PWM[] = {
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
{PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
// {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
{PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)}, // TIM16_CH1N
{PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 1)}, // TIM17_CH1N
{PB_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
// {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
{PB_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
// {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
{NC, NP, 0}
};
#endif

//*** SERIAL ***

#ifdef HAL_UART_MODULE_ENABLED
WEAK const PinMap PinMap_UART_TX[] = {
{PA_2, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_5, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_UART_MODULE_ENABLED
WEAK const PinMap PinMap_UART_RX[] = {
{PA_3, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PA_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_UART_MODULE_ENABLED
WEAK const PinMap PinMap_UART_RTS[] = {
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_UART_MODULE_ENABLED
WEAK const PinMap PinMap_UART_CTS[] = {
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PB_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{NC, NP, 0}
};
#endif

//*** SPI ***

#ifdef HAL_SPI_MODULE_ENABLED
WEAK const PinMap PinMap_SPI_MOSI[] = {
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_SPI_MODULE_ENABLED
WEAK const PinMap PinMap_SPI_MISO[] = {
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_SPI_MODULE_ENABLED
WEAK const PinMap PinMap_SPI_SCLK[] = {
{PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_SPI_MODULE_ENABLED
WEAK const PinMap PinMap_SPI_SSEL[] = {
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{PB_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
{NC, NP, 0}
};
#endif

//*** No CAN ***

//*** No ETHERNET ***

//*** QUADSPI ***

#ifdef HAL_QSPI_MODULE_ENABLED
WEAK const PinMap PinMap_QUADSPI[] = {
{PA_2, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_NCS
{PA_3, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_CLK
{PA_6, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO3
{PA_7, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO2
{PB_8, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO1
{PB_9, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO0
{NC, NP, 0}
};
#endif

//*** USB ***

#ifdef HAL_PCD_MODULE_ENABLED
WEAK const PinMap PinMap_USB[] = {
{PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DM
{PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DP
// {PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_USB)}, // USB_NOE
{NC, NP, 0}
};
#endif

//*** No USB_OTG_FS ***

//*** No USB_OTG_HS ***

//*** No SD ***
31 changes: 31 additions & 0 deletions variants/MKR_SHARKY/PinNamesVar.h
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1,31 @@
/* SYS_WKUP */
#ifdef PWR_WAKEUP_PIN1
SYS_WKUP1 = PA_0,
#endif
#ifdef PWR_WAKEUP_PIN2
SYS_WKUP2 = PC_13,
#endif
#ifdef PWR_WAKEUP_PIN3
SYS_WKUP3 = PC_12,
#endif
#ifdef PWR_WAKEUP_PIN4
SYS_WKUP4 = PA_2,
#endif
#ifdef PWR_WAKEUP_PIN5
SYS_WKUP5 = PC_5,
#endif
#ifdef PWR_WAKEUP_PIN6
SYS_WKUP6 = NC,
#endif
#ifdef PWR_WAKEUP_PIN7
SYS_WKUP7 = NC,
#endif
#ifdef PWR_WAKEUP_PIN8
SYS_WKUP8 = NC,
#endif
/* USB */
#ifdef USBCON
USB_DM = PA_11,
USB_DP = PA_12,
USB_NOE = PA_13,
#endif
Loading