New variant BLUE_F407VE_Mini

CI/build/conf/cores_config.json

@@ -54,7 +54,7 @@
         {
           "pattern": "STM32SD",
           "applicable": true,
-          "boards": [ "DISCO_F746NG", "BLACK_F407VE" ]
+          "boards": [ "DISCO_F746NG", "BLACK_F407VE", "BLUE_F407VE_Mini" ]
         },
         {
           "pattern": "/Ethernet/",

boards.txt

@@ -522,6 +522,19 @@ GenF4.menu.pnum.BLACK_F407VE.build.product_line=STM32F407xx
 GenF4.menu.pnum.BLACK_F407VE.build.variant=BLACK_F407VE
 GenF4.menu.pnum.BLACK_F407VE.build.cmsis_lib_gcc=arm_cortexM4l_math
 
+# Blue F407VE mini: http://wiki.stm32duino.com/index.php?title=Vcc-gnd.com_STM32F407VET6_Mini
+# Support: Serial1 (USART1 on PA10, PA9)
+# Default SPI: SPI (SPI1 on PB3,PB4,PB5)
+GenF4.menu.pnum.BLUE_F407VE_MINI=Blue F407VE mini
+GenF4.menu.pnum.BLUE_F407VE_MINI.upload.maximum_size=524288
+GenF4.menu.pnum.BLUE_F407VE_MINI.upload.maximum_data_size=131072
+GenF4.menu.pnum.BLUE_F407VE_MINI.build.mcu=cortex-m4 -mfpu=fpv4-sp-d16 -mfloat-abi=hard
+GenF4.menu.pnum.BLUE_F407VE_MINI.build.board=BLUE_F407VE_MINI
+GenF4.menu.pnum.BLUE_F407VE_MINI.build.series=STM32F4xx
+GenF4.menu.pnum.BLUE_F407VE_MINI.build.product_line=STM32F407xx
+GenF4.menu.pnum.BLUE_F407VE_MINI.build.variant=BLUE_F407VE_MINI
+GenF4.menu.pnum.BLUE_F407VE_MINI.build.cmsis_lib_gcc=arm_cortexM4l_math
+
 # Upload menu
 GenF4.menu.upload_method.STLink=STLink
 GenF4.menu.upload_method.STLink.upload.protocol=STLink

variants/BLUE_F407VE_Mini/PinNamesVar.h

@@ -0,0 +1,25 @@
+    /* SYS_WKUP */
+#ifdef PWR_WAKEUP_PIN1
+    SYS_WKUP1 = PA_0,
+#endif
+#ifdef PWR_WAKEUP_PIN2
+    SYS_WKUP2 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN3
+    SYS_WKUP3 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN4
+    SYS_WKUP4 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN5
+    SYS_WKUP5 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN6
+    SYS_WKUP6 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN7
+    SYS_WKUP7 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN8
+    SYS_WKUP8 = NC,
+#endif

variants/BLUE_F407VE_Mini/ldscript.ld

@@ -0,0 +1,189 @@
+/*
+*****************************************************************************
+**
+
+**  File        : LinkerScript.ld
+**
+**  Abstract    : Linker script for STM32F407VETx Device with
+**                512KByte FLASH, 128KByte RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used.
+**
+**  Target      : STMicroelectronics STM32
+**
+**
+**  Distribution: The file is distributed as is, without any warranty
+**                of any kind.
+**
+**  (c)Copyright Ac6.
+**  You may use this file as-is or modify it according to the needs of your
+**  project. Distribution of this file (unmodified or modified) is not
+**  permitted. Ac6 permit registered System Workbench for MCU users the
+**  rights to distribute the assembled, compiled & linked contents of this
+**  file as part of an application binary file, provided that it is built
+**  using the System Workbench for MCU toolchain.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20020000;    /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200;      /* required amount of heap  */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 128K
+CCMRAM (rw)      : ORIGIN = 0x10000000, LENGTH = 64K
+FLASH (rx)      : ORIGIN = 0x8000000, LENGTH = 512K
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data goes into FLASH */
+  .text ALIGN(8):
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data goes into FLASH */
+  .rodata ALIGN(4):
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+  .ARM : {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } >FLASH
+
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >FLASH
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >FLASH
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >FLASH
+
+  /* used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : 
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM AT> FLASH
+
+  _siccmram = LOADADDR(.ccmram);
+
+  /* CCM-RAM section 
+  * 
+  * IMPORTANT NOTE! 
+  * If initialized variables will be placed in this section,
+  * the startup code needs to be modified to copy the init-values.  
+  */
+  .ccmram :
+  {
+    . = ALIGN(4);
+    _sccmram = .;       /* create a global symbol at ccmram start */
+    *(.ccmram)
+    *(.ccmram*)
+
+    . = ALIGN(4);
+    _eccmram = .;       /* create a global symbol at ccmram end */
+  } >CCMRAM AT> FLASH
+
+
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss secion */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM
+
+
+
+  /* Remove information from the standard libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}
+
+