System(WB) update stm32 WBxx HAL Drivers & CMSIS

cores/arduino/stm32/stm32_def_build.h

@@ -426,6 +426,8 @@
     #define CMSIS_STARTUP_FILE "startup_stm32wb10xx_cm4.s"
   #elif defined(STM32WB15xx)
     #define CMSIS_STARTUP_FILE "startup_stm32wb15xx_cm4.s"
+  #elif defined(STM32WB1Mxx)
+    #define CMSIS_STARTUP_FILE "startup_stm32wb1mxx_cm4.s"
   #elif defined(STM32WB30xx)
     #define CMSIS_STARTUP_FILE "startup_stm32wb30xx_cm4.s"
   #elif defined(STM32WB35xx)

system/Drivers/CMSIS/Device/ST/STM32WBxx/Include/stm32wbxx.h

@@ -38,7 +38,7 @@
 #define __STM32WBxx_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif /* __cplusplus */
 
 /** @addtogroup Library_configuration_section
@@ -57,19 +57,19 @@
   */
 #if !defined  (USE_HAL_DRIVER)
 /**
- * @brief Comment the line below if you will not use the peripherals drivers.
+  * @brief Comment the line below if you will not use the peripherals drivers.
    In this case, these drivers will not be included and the application code will
    be based on direct access to peripherals registers
    */
-  /*#define USE_HAL_DRIVER */
+/*#define USE_HAL_DRIVER */
 #endif /* USE_HAL_DRIVER */
 
 /**
   * @brief CMSIS Device version number
   */
 #define __STM32WBxx_CMSIS_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
-#define __STM32WBxx_CMSIS_VERSION_SUB1   (0x0AU) /*!< [23:16] sub1 version */
-#define __STM32WBxx_CMSIS_VERSION_SUB2   (0x01U) /*!< [15:8]  sub2 version */
+#define __STM32WBxx_CMSIS_VERSION_SUB1   (0x0BU) /*!< [23:16] sub1 version */
+#define __STM32WBxx_CMSIS_VERSION_SUB2   (0x00U) /*!< [15:8]  sub2 version */
 #define __STM32WBxx_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
 #define __STM32WBxx_CMSIS_DEVICE_VERSION        ((__STM32WBxx_CMSIS_VERSION_MAIN << 24)\
                                                 |(__STM32WBxx_CMSIS_VERSION_SUB1 << 16)\
@@ -85,21 +85,23 @@
   */
 
 #if defined(STM32WB55xx)
-  #include "stm32wb55xx.h"
+#include "stm32wb55xx.h"
 #elif defined(STM32WB5Mxx)
-  #include "stm32wb5mxx.h"
+#include "stm32wb5mxx.h"
 #elif defined(STM32WB50xx)
-  #include "stm32wb50xx.h"
+#include "stm32wb50xx.h"
 #elif defined(STM32WB35xx)
-  #include "stm32wb35xx.h"
+#include "stm32wb35xx.h"
 #elif defined(STM32WB30xx)
-  #include "stm32wb30xx.h"
+#include "stm32wb30xx.h"
 #elif defined(STM32WB15xx)
-  #include "stm32wb15xx.h"
+#include "stm32wb15xx.h"
 #elif defined(STM32WB10xx)
-  #include "stm32wb10xx.h"
+#include "stm32wb10xx.h"
+#elif defined(STM32WB1Mxx)
+#include "stm32wb1mxx.h"
 #else
- #error "Please select first the target STM32WBxx device used in your application, for instance xxx (in stm32wbxx.h file)"
+#error "Please select first the target STM32WBxx device used in your application, for instance xxx (in stm32wbxx.h file)"
 #endif
 /**
   * @}
@@ -211,7 +213,7 @@ typedef enum
   */
 
 #if defined (USE_HAL_DRIVER)
- #include "stm32wbxx_hal.h"
+#include "stm32wbxx_hal.h"
 #endif /* USE_HAL_DRIVER */
 
 #ifdef __cplusplus

system/Drivers/CMSIS/Device/ST/STM32WBxx/Include/system_stm32wbxx.h

@@ -2,7 +2,7 @@
   ******************************************************************************
   * @file    system_stm32wbxx.h
   * @author  MCD Application Team
-  * @brief   CMSIS Cortex Device System Source File for STM32WBxx devices.  
+  * @brief   CMSIS Cortex Device System Source File for STM32WBxx devices.
   ******************************************************************************
   * @attention
   *
@@ -22,17 +22,17 @@
 
 /** @addtogroup stm32wbxx_system
   * @{
-  */  
-  
+  */
+
 /**
   * @brief Define to prevent recursive inclusion
   */
 #ifndef __SYSTEM_STM32WBXX_H
 #define __SYSTEM_STM32WBXX_H
 
 #ifdef __cplusplus
- extern "C" {
-#endif 
+extern "C" {
+#endif
 
 #include <stdint.h>
 
@@ -48,22 +48,22 @@
 /** @addtogroup STM32WBxx_System_Exported_types
   * @{
   */
-  /* The SystemCoreClock variable is updated in three ways:
-      1) by calling CMSIS function SystemCoreClockUpdate()
-      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
-      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
-         Note: If you use this function to configure the system clock; then there
-               is no need to call the 2 first functions listed above, since SystemCoreClock
-               variable is updated automatically.
-  */
+/* The SystemCoreClock variable is updated in three ways:
+    1) by calling CMSIS function SystemCoreClockUpdate()
+    2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+    3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+       Note: If you use this function to configure the system clock; then there
+             is no need to call the 2 first functions listed above, since SystemCoreClock
+             variable is updated automatically.
+*/
 
 extern uint32_t SystemCoreClock;            /*!< System Clock Frequency */
 
 extern const uint32_t AHBPrescTable[16];    /*!< AHB prescalers table values */
 extern const uint32_t APBPrescTable[8];     /*!< APB prescalers table values */
 extern const uint32_t MSIRangeTable[16];    /*!< MSI ranges table values     */
 
-#if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx) || defined (STM32WB15xx)
+#if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx) || defined (STM32WB15xx) || defined (STM32WB1Mxx)
 extern const uint32_t SmpsPrescalerTable[4][6];  /*!< SMPS factor ranges table values     */
 #endif
 /**
@@ -89,7 +89,7 @@ extern const uint32_t SmpsPrescalerTable[4][6];  /*!< SMPS factor ranges table v
 /** @addtogroup STM32WBxx_System_Exported_Functions
   * @{
   */
-  
+
 extern void SystemInit(void);
 extern void SystemCoreClockUpdate(void);
 /**
@@ -105,7 +105,7 @@ extern void SystemCoreClockUpdate(void);
 /**
   * @}
   */
-  
+
 /**
   * @}
   */

system/Drivers/CMSIS/Device/ST/STM32WBxx/README.md

@@ -25,21 +25,7 @@ Details about the content of this release are available in the release note [her
 
 ## Compatibility information
 
-In this table, you can find the successive versions of this CMSIS Device component, in-line with the corresponding versions of the full MCU package:
-
-CMSIS Device WB | CMSIS Core     | Was delivered in the full MCU package
---------------- | ----------     | -------------------------------------
-Tag v1.0.0      | Tag v4.5_cm4   | Tag v1.0.0
-Tag v1.1.0      | Tag v4.5_cm4   | Tag v1.1.0
-Tag v1.2.0      | Tag v5.4.0_cm4 | Tag v1.2.0
-Tag v1.3.0      | Tag v5.4.0_cm4 | Tag v1.3.0
-Tag v1.4.0      | Tag v5.4.0_cm4 | Tag v1.5.0
-Tag v1.5.0      | Tag v5.4.0_cm4 | Tag v1.8.0
-Tag v1.7.0      | Tag v5.6.0_cm4 | Tag v1.10.0
-Tag v1.8.0      | Tag v5.6.0_cm4 | Tag v1.11.0
-Tag v1.9.0      | Tag v5.6.0_cm4 | Tag v1.12.0
-Tag v1.10.0     | Tag v5.6.0_cm4 | Tag v1.13.0
-Tag v1.10.1     | Tag v5.6.0_cm4 | Tag v1.13.3
+It is **crucial** that you use a consistent set of versions for the CMSIS Core - CMSIS Device, as mentioned in [this](https://htmlpreview.github.io/?https://github.com/STMicroelectronics/STM32CubeWB/blob/master/Release_Notes.html) release note.
 
 The full **STM32CubeWB** MCU package is available [here](https://github.com/STMicroelectronics/STM32CubeWB).