v2.2.4

README.md

@@ -80,14 +80,18 @@ There is a [new example](./examples/Dead_Reckoning/Example8_getNAVPVAT) showing
 
 ## Memory Usage
 
-The u-blox GNSS library has grown considerably over the years and v2.0.8 came very close to completely filling the program memory on platforms like the ATmega328 (Arduino Uno).
-If you want to reduce the amount of memory used by the library, you can edit the header file (_SparkFun_u-blox_GNSS_Arduino_Library.h_) and uncomment line 60:
+The u-blox GNSS library has grown considerably over the years and now exceeds the available program memory on platforms like the ATmega328 (Arduino Uno).
+If you want to reduce the amount of memory used by the library, you can edit the header file (_SparkFun_u-blox_GNSS_Arduino_Library.h_) and uncomment lines 60 and 63:
 
 ```
 #define SFE_UBLOX_REDUCED_PROG_MEM // Uncommenting this line will delete the minor debug messages to save memory
 ```
 
-Doing this will save approximately 15% of the program memory used by the library. From v2.0.18 of the library, the debug messages are automatically deleted on ARDUINO_AVR_UNO platforms. For other platforms, you will need to uncomment that line manually.
+```
+#define SFE_UBLOX_DISABLE_AUTO_NMEA // Uncommenting this line will disable auto-NMEA support to save memory
+```
+
+**Please note:** the debug messages are automatically deleted and auto-NMEA support is automatically disabled on ARDUINO_AVR_UNO platforms. For other platforms, you will need to uncomment those lines manually.
 
 On Windows, you will normally find _SparkFun_u-blox_GNSS_Arduino_Library.h_ in:
 - Documents\Arduino\libraries\SparkFun_u-blox_GNSS_Arduino_Library\src

Theory.md

@@ -56,6 +56,7 @@ In v2.0, the full list of messages which can be processed and logged automatical
 - UBX-NAV-HPPOSLLH (0x01 0x14): High precision geodetic position solution
 - UBX-NAV-PVAT (0x01 0x17): Navigation position velocity attitude time solution (**only with ADR or UDR products**)
 - UBX-NAV-CLOCK (0x01 0x22): Clock solution
+- UBX-NAV-SAT (0x01 0x35): Satellite information
 - UBX-NAV-SVIN (0x01 0x3B): Survey-in data (**only with High Precision GNSS products**)
 - UBX-NAV-RELPOSNED (0x01 0x3C): Relative positioning information in NED frame (**only with High Precision GNSS products**)
 - UBX-NAV-AOPSTATUS (0x01 0x60): AssistNow Autonomous status

examples/Automatic_NMEA/Example1_getLatestNMEAGPGGA/Example1_getLatestNMEAGPGGA.ino

@@ -2,10 +2,12 @@
   Get the GPGGA NMEA sentence using getLatestNMEAGPGGA
   By: Paul Clark
   SparkFun Electronics
-  Date: January 12th, 2021
+  Date: January 12th, 2022
   License: MIT. See license file for more information but you can
   basically do whatever you want with this code.
 
+  ** Please note: this example will not run on Arduino Uno. See https://github.com/sparkfun/SparkFun_u-blox_GNSS_Arduino_Library/blob/main/README.md#memory-usage
+
   This example shows how to turn on/off the NMEA sentences being output over I2C.
   It then demonstrates how to use the new getLatestNMEAGPGGA function to retrieve the latest GPGGA message.
   getLatestNMEAGPGGA returns immediately - it is not blocking.

examples/Automatic_NMEA/Example2_NMEA_GGA_Callbacks/Example2_NMEA_GGA_Callbacks.ino

@@ -2,10 +2,12 @@
   Get the latest GPGGA / GNGGA NMEA sentence using callbacks
   By: Paul Clark
   SparkFun Electronics
-  Date: January 12th, 2021
+  Date: January 12th, 2022
   License: MIT. See license file for more information but you can
   basically do whatever you want with this code.
 
+  ** Please note: this example will not run on Arduino Uno. See https://github.com/sparkfun/SparkFun_u-blox_GNSS_Arduino_Library/blob/main/README.md#memory-usage
+
   This example shows how to turn on/off the NMEA sentences being output over I2C.
   It then demonstrates how to get the latest GPGGA or GNGGA message autonomously using callbacks.
 

examples/Automatic_NMEA/Example3_getLatestNMEA_GPGGA-VTG-RMC-ZDA/Example3_getLatestNMEA_GPGGA-VTG-RMC-ZDA.ino

@@ -2,10 +2,12 @@
   Get the NMEA sentence using getLatestNMEAGPxxx (GGA, VTG, RMC, ZDA)
   By: Paul Clark
   SparkFun Electronics
-  Date: March 2nd, 2021
+  Date: March 2nd, 2022
   License: MIT. See license file for more information but you can
   basically do whatever you want with this code.
 
+  ** Please note: this example will not run on Arduino Uno. See https://github.com/sparkfun/SparkFun_u-blox_GNSS_Arduino_Library/blob/main/README.md#memory-usage
+
   This example shows how to turn on/off the NMEA sentences being output over I2C.
   It then demonstrates how to use the new getLatestNMEAGPxxx function to retrieve the latest GPGGA message.
   getLatestNMEAGPxxx returns immediately - it is not blocking.

examples/Automatic_NMEA/Example4_NMEA_GGA_VTG_RMC_ZDA_Callbacks/Example4_NMEA_GGA_VTG_RMC_ZDA_Callbacks.ino

@@ -2,10 +2,12 @@
   Get the latest GGA, VTG, RMC, ZDA NMEA sentence using callbacks
   By: Paul Clark
   SparkFun Electronics
-  Date: March 2nd, 2021
+  Date: March 2nd, 2022
   License: MIT. See license file for more information but you can
   basically do whatever you want with this code.
 
+  ** Please note: this example will not run on Arduino Uno. See https://github.com/sparkfun/SparkFun_u-blox_GNSS_Arduino_Library/blob/main/README.md#memory-usage
+
   This example shows how to turn on/off the NMEA sentences being output over I2C.
   It then demonstrates how to get the latest GGA, VTG, RMC or ZDA message autonomously using callbacks.
 

examples/Example29_JammingInformation/Example29_JammingInformation.ino

@@ -2,7 +2,7 @@
   Get the jamming state and indication
   By: Paul Clark
   SparkFun Electronics
-  Date: March 2nd, 2021
+  Date: March 2nd, 2022
   License: MIT. See license file for more information but you can
   basically do whatever you want with this code.
 
@@ -73,7 +73,7 @@ void loop()
 
   if (myGNSS.getHWstatus(&hwStatus)) // Read the hardware status
   {
-    Serial.println(F("Hardware status (UBX_MON_RF):"));
+    Serial.println(F("Hardware status (UBX_MON_HW):"));
 
     Serial.print(F("Jamming state: "));
     Serial.print(hwStatus.flags.bits.jammingState);

library.properties

@@ -1,5 +1,5 @@
 name=SparkFun u-blox GNSS Arduino Library
-version=2.2.3
+version=2.2.4
 author=SparkFun Electronics <techsupport@sparkfun.com>
 maintainer=SparkFun Electronics <sparkfun.com>
 sentence=Library for I2C, Serial and SPI Communication with u-blox GNSS modules<br/><br/>

src/SparkFun_u-blox_GNSS_Arduino_Library.cpp

@@ -422,7 +422,7 @@ void SFE_UBLOX_GNSS::end(void)
     packetUBXHNRPVT = NULL; // Redundant?
   }
 
-#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+#ifndef SFE_UBLOX_DISABLE_AUTO_NMEA
   if (storageNMEAGPGGA != NULL)
   {
     if (storageNMEAGPGGA->callbackCopy != NULL)
@@ -1863,7 +1863,7 @@ void SFE_UBLOX_GNSS::process(uint8_t incoming, ubxPacket *incomingUBX, uint8_t r
         _signsOfLife = isNMEAHeaderValid();
       }
 
-#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+#ifndef SFE_UBLOX_DISABLE_AUTO_NMEA
       // Check if we have automatic storage for this message
       if (isThisNMEAauto())
       {
@@ -1902,7 +1902,7 @@ void SFE_UBLOX_GNSS::process(uint8_t incoming, ubxPacket *incomingUBX, uint8_t r
 
     if ((nmeaByteCounter > 5) || (nmeaByteCounter < 0)) // Should we add incoming to the file buffer and/or pass it to processNMEA?
     {
-#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+#ifndef SFE_UBLOX_DISABLE_AUTO_NMEA
       if (isThisNMEAauto())
       {
         uint8_t *lengthPtr = getNMEAWorkingLengthPtr(); // Get a pointer to the working copy length
@@ -1938,7 +1938,7 @@ void SFE_UBLOX_GNSS::process(uint8_t incoming, ubxPacket *incomingUBX, uint8_t r
 
     if (nmeaByteCounter == 0) // Check if we are done
     {
-#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+#ifndef SFE_UBLOX_DISABLE_AUTO_NMEA
       if (isThisNMEAauto())
       {
         uint8_t *workingLengthPtr = getNMEAWorkingLengthPtr(); // Get a pointer to the working copy length
@@ -2194,7 +2194,7 @@ void SFE_UBLOX_GNSS::processNMEA(char incoming)
     _nmeaOutputPort->write(incoming); // Echo this byte to the serial port
 }
 
-#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+#ifndef SFE_UBLOX_DISABLE_AUTO_NMEA
 // Check if the NMEA message (in nmeaAddressField) is "auto" (i.e. has RAM allocated for it)
 bool SFE_UBLOX_GNSS::isThisNMEAauto()
 {
@@ -5568,7 +5568,7 @@ void SFE_UBLOX_GNSS::checkCallbacks(void)
     packetUBXHNRPVT->automaticFlags.flags.bits.callbackCopyValid = false; // Mark the data as stale
   }
 
-#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+#ifndef SFE_UBLOX_DISABLE_AUTO_NMEA
   if ((storageNMEAGPGGA != NULL)                                               // If RAM has been allocated for message storage
       && (storageNMEAGPGGA->callbackCopy != NULL)                              // If RAM has been allocated for the copy of the data
       && (storageNMEAGPGGA->automaticFlags.flags.bits.callbackCopyValid == 1)) // If the copy of the data is valid
@@ -14818,7 +14818,7 @@ uint32_t SFE_UBLOX_GNSS::getProcessNMEAMask()
   return (_processNMEA.all);
 }
 
-#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+#ifndef SFE_UBLOX_DISABLE_AUTO_NMEA
 // Initiate automatic storage of NMEA GPGGA messages
 
 // Get the most recent GPGGA message

src/SparkFun_u-blox_GNSS_Arduino_Library.h

@@ -57,12 +57,19 @@
 #include "u-blox_structs.h"
 
 // Uncomment the next line (or add SFE_UBLOX_REDUCED_PROG_MEM as a compiler directive) to reduce the amount of program memory used by the library
-//#define SFE_UBLOX_REDUCED_PROG_MEM // Uncommenting this line will delete the minor debug messages and disable auto-NMEA support to save memory
+//#define SFE_UBLOX_REDUCED_PROG_MEM // Uncommenting this line will delete the minor debug messages to save memory
 
-// The code just about fills the program memory on the ATmega328P (Arduino Uno), so let's delete the minor debug messages and disable auto-NMEA support anyway
-#if !defined(SFE_UBLOX_REDUCED_PROG_MEM) && defined(ARDUINO_ARCH_AVR)
+// Uncomment the next line (or add SFE_UBLOX_DISABLE_AUTO_NMEA as a compiler directive) to reduce the amount of program memory used by the library
+//#define SFE_UBLOX_DISABLE_AUTO_NMEA // Uncommenting this line will disable auto-NMEA support to save memory
+
+// The code exceeds the program memory on the ATmega328P (Arduino Uno), so let's delete the minor debug messages and disable auto-NMEA support anyway
+// However, the ATmega2560 and ATmega1280 _do_ have enough memory, so let's exclude those
+#if !defined(SFE_UBLOX_REDUCED_PROG_MEM) && defined(ARDUINO_ARCH_AVR) && !defined(ARDUINO_AVR_MEGA2560) && !defined(ARDUINO_AVR_MEGA) && !defined(ARDUINO_AVR_ADK)
 #define SFE_UBLOX_REDUCED_PROG_MEM
 #endif
+#if !defined(SFE_UBLOX_DISABLE_AUTO_NMEA) && defined(ARDUINO_ARCH_AVR) && !defined(ARDUINO_AVR_MEGA2560) && !defined(ARDUINO_AVR_MEGA) && !defined(ARDUINO_AVR_ADK)
+#define SFE_UBLOX_DISABLE_AUTO_NMEA
+#endif
 
 //-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
 
@@ -1431,7 +1438,7 @@ class SFE_UBLOX_GNSS
   void setProcessNMEAMask(uint32_t messages = SFE_UBLOX_FILTER_NMEA_ALL); // Control which NMEA messages are passed to processNMEA. Default to passing ALL messages
   uint32_t getProcessNMEAMask();                                          // Return which NMEA messages are passed to processNMEA
 
-#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+#ifndef SFE_UBLOX_DISABLE_AUTO_NMEA
   // Support for "auto" storage of NMEA messages
   uint8_t getLatestNMEAGPGGA(NMEA_GGA_data_t *data);                           // Return the most recent GPGGA: 0 = no data, 1 = stale data, 2 = fresh data
   bool setNMEAGPGGAcallback(void (*callbackPointer)(NMEA_GGA_data_t));         // Enable a callback on the arrival of a GPGGA message
@@ -1513,7 +1520,7 @@ class SFE_UBLOX_GNSS
   UBX_MGA_ACK_DATA0_t *packetUBXMGAACK = NULL; // Pointer to struct. RAM will be allocated for this if/when necessary
   UBX_MGA_DBD_t *packetUBXMGADBD = NULL;       // Pointer to struct. RAM will be allocated for this if/when necessary
 
-#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+#ifndef SFE_UBLOX_DISABLE_AUTO_NMEA
   NMEA_GPGGA_t *storageNMEAGPGGA = NULL; // Pointer to struct. RAM will be allocated for this if/when necessary
   NMEA_GNGGA_t *storageNMEAGNGGA = NULL; // Pointer to struct. RAM will be allocated for this if/when necessary
   NMEA_GPVTG_t *storageNMEAGPVTG = NULL; // Pointer to struct. RAM will be allocated for this if/when necessary
@@ -1606,7 +1613,7 @@ class SFE_UBLOX_GNSS
   bool initPacketUBXMGAACK();        // Allocate RAM for packetUBXMGAACK and initialize it
   bool initPacketUBXMGADBD();        // Allocate RAM for packetUBXMGADBD and initialize it
 
-#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+#ifndef SFE_UBLOX_DISABLE_AUTO_NMEA
   bool initStorageNMEAGPGGA(); // Allocate RAM for incoming NMEA GPGGA messages and initialize it
   bool initStorageNMEAGNGGA(); // Allocate RAM for incoming NMEA GNGGA messages and initialize it
   bool initStorageNMEAGPVTG(); // Allocate RAM for incoming NMEA GPVTG messages and initialize it