sparkfun · PaulZC · Dec 30, 2020 · Dec 30, 2020
diff --git a/examples/Dead Reckoning/Example1_calibrateSensor/Example1_calibrateSensor.ino b/examples/Dead Reckoning/Example1_calibrateSensor/Example1_calibrateSensor.ino
@@ -32,7 +32,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GPS
+#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/Dead Reckoning/Example2_getIMUData/Example2_getIMUData.ino b/examples/Dead Reckoning/Example2_getIMUData/Example2_getIMUData.ino
@@ -24,7 +24,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GPS
+#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/Dead Reckoning/Example3_getSensorStatus/Example3_getSensorStatus.ino b/examples/Dead Reckoning/Example3_getSensorStatus/Example3_getSensorStatus.ino
@@ -28,7 +28,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GPS
+#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/Dead Reckoning/Example4_vehicleDynamics/Example4_vehicleDynamics.ino b/examples/Dead Reckoning/Example4_vehicleDynamics/Example4_vehicleDynamics.ino
@@ -26,7 +26,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GPS
+#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/Dead Reckoning/Example5_getHNRData/Example5_getHNRData.ino b/examples/Dead Reckoning/Example5_getHNRData/Example5_getHNRData.ino
@@ -29,7 +29,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GPS
+#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/Dead Reckoning/Example6_getAutoHNRData/Example6_getAutoHNRData.ino b/examples/Dead Reckoning/Example6_getAutoHNRData/Example6_getAutoHNRData.ino
@@ -28,7 +28,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GPS
+#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 boolean usingAutoHNRAtt = false;

diff --git a/examples/Example10_AltitudeMSL/Example10_AltitudeMSL.ino b/examples/Example10_AltitudeMSL/Example10_AltitudeMSL.ino
@@ -30,7 +30,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Tracks the passing of 2000ms (2 seconds)

diff --git a/...les/Example11_ResetModule/Example1_FactoryDefaultviaI2C/Example1_FactoryDefaultviaI2C.ino b/...les/Example11_ResetModule/Example1_FactoryDefaultviaI2C/Example1_FactoryDefaultviaI2C.ino
@@ -19,7 +19,7 @@
   Open the serial monitor at 115200 baud to see the output
 */
 
-#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GPS
+#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/...ple11_ResetModule/Example2_FactoryDefaultsviaSerial/Example2_FactoryDefaultsviaSerial.ino b/...ple11_ResetModule/Example2_FactoryDefaultsviaSerial/Example2_FactoryDefaultsviaSerial.ino
@@ -19,7 +19,7 @@
   Open the serial monitor at 115200 baud to see the output
 */
 
-#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GPS
+#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 int state = 0; // steps through auto-baud, reset, etc states

diff --git a/examples/Example12_UseUart/Example12_UseUart.ino b/examples/Example12_UseUart/Example12_UseUart.ino
@@ -27,7 +27,7 @@
   Open the serial monitor at 115200 baud to see the output
 */
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 #include <SoftwareSerial.h>

diff --git a/examples/Example13_PVT/Example1_AutoPVT/Example1_AutoPVT.ino b/examples/Example13_PVT/Example1_AutoPVT/Example1_AutoPVT.ino
@@ -28,7 +28,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GPS
+#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/Example13_PVT/Example2_AutoPVT_ExplicitUpdate/Example2_AutoPVT_ExplicitUpdate.ino b/examples/Example13_PVT/Example2_AutoPVT_ExplicitUpdate/Example2_AutoPVT_ExplicitUpdate.ino
@@ -29,7 +29,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GPS
+#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/Example13_PVT/Example3_AssumeAutoPVTviaUart/Example3_AssumeAutoPVTviaUart.ino b/examples/Example13_PVT/Example3_AssumeAutoPVTviaUart/Example3_AssumeAutoPVTviaUart.ino
@@ -24,7 +24,7 @@
   Open the serial monitor at 115200 baud to see the output
 */
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/Example14_DebugOutput/Example14_DebugOutput.ino b/examples/Example14_DebugOutput/Example14_DebugOutput.ino
@@ -22,7 +22,7 @@
   Open the serial monitor at 115200 baud to see the output
 */
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/Example15_GetDateTime/Example15_GetDateTime.ino b/examples/Example15_GetDateTime/Example15_GetDateTime.ino
@@ -26,7 +26,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/Example16_Nanosecond_MaxOutput/Example16_Nanosecond_MaxOutput.ino b/examples/Example16_Nanosecond_MaxOutput/Example16_Nanosecond_MaxOutput.ino
@@ -26,7 +26,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/Example16_PartialSecond_MaxOutput/Example16_PartialSecond_MaxOutput.ino b/examples/Example16_PartialSecond_MaxOutput/Example16_PartialSecond_MaxOutput.ino
@@ -25,7 +25,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/Example17_Geofence/Example17_Geofence.ino b/examples/Example17_Geofence/Example17_Geofence.ino
@@ -29,7 +29,7 @@
 
 #include <Wire.h> // Needed for I2C
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/Example18_PowerSaveMode/Example18_PowerSaveMode.ino b/examples/Example18_PowerSaveMode/Example18_PowerSaveMode.ino
@@ -40,7 +40,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/Example19_DynamicModel/Example19_DynamicModel.ino b/examples/Example19_DynamicModel/Example19_DynamicModel.ino
@@ -37,7 +37,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/Example1_BasicNMEARead/Example1_BasicNMEARead.ino b/examples/Example1_BasicNMEARead/Example1_BasicNMEARead.ino
@@ -23,7 +23,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/Example20_SendCustomCommand/Example20_SendCustomCommand.ino b/examples/Example20_SendCustomCommand/Example20_SendCustomCommand.ino
@@ -36,7 +36,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/Example21_ModuleInfo/Example21_ModuleInfo.ino b/examples/Example21_ModuleInfo/Example21_ModuleInfo.ino
@@ -39,7 +39,7 @@
 
 #define MAX_PAYLOAD_SIZE 384 // Override MAX_PAYLOAD_SIZE for getModuleInfo which can return up to 348 bytes
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 
 // Extend the class for getModuleInfo
 class SFE_UBLOX_GPS_ADD : public SFE_UBLOX_GPS

diff --git a/examples/Example22_PowerOff/Example22_PowerOff.ino b/examples/Example22_PowerOff/Example22_PowerOff.ino
@@ -26,7 +26,7 @@
   Open the serial monitor at 115200 baud to see the output
 */
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 
 // define a digital pin capable of driving HIGH and LOW
 #define WAKEUP_PIN 5

diff --git a/examples/Example2_NMEAParsing/Example2_NMEAParsing.ino b/examples/Example2_NMEAParsing/Example2_NMEAParsing.ino
@@ -26,7 +26,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 #include <MicroNMEA.h> //http://librarymanager/All#MicroNMEA

diff --git a/examples/Example3_GetPosition/Example3_GetPosition.ino b/examples/Example3_GetPosition/Example3_GetPosition.ino
@@ -30,7 +30,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/Example4_FixType/Example4_FixType.ino b/examples/Example4_FixType/Example4_FixType.ino
@@ -34,7 +34,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/Example5_SpeedHeadingPrecision/Example5_SpeedHeadingPrecision.ino b/examples/Example5_SpeedHeadingPrecision/Example5_SpeedHeadingPrecision.ino
@@ -28,7 +28,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/Example6_EnableNMEASentences/Example6_EnableNMEASentences.ino b/examples/Example6_EnableNMEASentences/Example6_EnableNMEASentences.ino
@@ -29,7 +29,7 @@
 */
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 unsigned long lastGPSSend = 0;

diff --git a/examples/Example7_OutputRate/Example7_OutputRate.ino b/examples/Example7_OutputRate/Example7_OutputRate.ino
@@ -29,7 +29,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/Example8_GetProtocolVersion/Example8_GetProtocolVersion.ino b/examples/Example8_GetProtocolVersion/Example8_GetProtocolVersion.ino
@@ -28,7 +28,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/Example9_ChangeI2CAddress/Example9_ChangeI2CAddress.ino b/examples/Example9_ChangeI2CAddress/Example9_ChangeI2CAddress.ino
@@ -22,7 +22,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Tracks the passing of 2000ms (2 seconds)

diff --git a/examples/NEO-M8P-2/Example1_EnableRTCM/Example1_EnableRTCM.ino b/examples/NEO-M8P-2/Example1_EnableRTCM/Example1_EnableRTCM.ino
@@ -24,7 +24,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/NEO-M8P-2/Example2_StartRTCMBase/Example2_StartRTCMBase.ino b/examples/NEO-M8P-2/Example2_StartRTCMBase/Example2_StartRTCMBase.ino
@@ -26,7 +26,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/NEO-M8P-2/Example3_BaseWithLCD/Example3_BaseWithLCD.ino b/examples/NEO-M8P-2/Example3_BaseWithLCD/Example3_BaseWithLCD.ino
@@ -29,7 +29,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 #include <SerLCD.h> //Click here to get the library: http://librarymanager/All#SparkFun_SerLCD

diff --git a/...e10_GetHighPrecisionPositionAndAccuracy/Example10_GetHighPrecisionPositionAndAccuracy.ino b/...e10_GetHighPrecisionPositionAndAccuracy/Example10_GetHighPrecisionPositionAndAccuracy.ino
@@ -23,7 +23,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/...e11_GetHighPrecisionPositionUsingDouble/Example11_GetHighPrecisionPositionUsingDouble.ino b/...e11_GetHighPrecisionPositionUsingDouble/Example11_GetHighPrecisionPositionUsingDouble.ino
@@ -29,7 +29,7 @@
 #define myWire Wire // This will work on the Redboard Artemis and the Artemis Thing Plus using Qwiic
 //#define myWire Wire1 // Uncomment this line if you are using the extra SCL1/SDA1 pins (D17 and D16) on the Thing Plus
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/ZED-F9P/Example12_setStaticPosition/Example12_setStaticPosition.ino b/examples/ZED-F9P/Example12_setStaticPosition/Example12_setStaticPosition.ino
@@ -24,7 +24,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/ZED-F9P/Example13_autoHPPOSLLH/Example13_autoHPPOSLLH.ino b/examples/ZED-F9P/Example13_autoHPPOSLLH/Example13_autoHPPOSLLH.ino
@@ -31,7 +31,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GPS
+#include <SparkFun_Ublox_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 void setup()

diff --git a/examples/ZED-F9P/Example14_NTRIPServer/Example14_NTRIPServer.ino b/examples/ZED-F9P/Example14_NTRIPServer/Example14_NTRIPServer.ino
@@ -34,7 +34,7 @@
 WiFiClient client;
 
 #include <Wire.h> //Needed for I2C to GPS
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 //Basic Connection settings to RTK2Go NTRIP Caster - See secrets for mount specific credentials

diff --git a/examples/ZED-F9P/Example1_GetPositionAccuracy/Example1_GetPositionAccuracy.ino b/examples/ZED-F9P/Example1_GetPositionAccuracy/Example1_GetPositionAccuracy.ino
@@ -23,7 +23,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/ZED-F9P/Example2_ValConfigurationMethod/Example2_ValConfigurationMethod.ino b/examples/ZED-F9P/Example2_ValConfigurationMethod/Example2_ValConfigurationMethod.ino
@@ -26,7 +26,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 long lastTime = 0; //Simple local timer. Limits amount if I2C traffic to Ublox module.

diff --git a/examples/ZED-F9P/Example3_StartRTCMBase/Example3_StartRTCMBase.ino b/examples/ZED-F9P/Example3_StartRTCMBase/Example3_StartRTCMBase.ino
@@ -26,7 +26,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 //#define USE_SERIAL1 // Uncomment this line to push the RTCM data to Serial1

diff --git a/examples/ZED-F9P/Example4_BaseWithLCD/Example4_BaseWithLCD.ino b/examples/ZED-F9P/Example4_BaseWithLCD/Example4_BaseWithLCD.ino
@@ -29,7 +29,7 @@
 
 #include <Wire.h> //Needed for I2C to GPS
 
-#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GPS
+#include "SparkFun_Ublox_Arduino_Library.h" //http://librarymanager/All#SparkFun_u-blox_GNSS
 SFE_UBLOX_GPS myGPS;
 
 #include <SerLCD.h> //http://librarymanager/All#SparkFun_SerLCD