Closed
Description
Subject of the issue
Background at issue 497. [https://github.com//issues/497]
Would be value-adding to have a new feature in the configuration utility that will set UBLOX_CFG_USBINPROT_SPARTN to 1 on reboot/powerup or at least leaves it alone if already set to 1. This will allow getting a PointPerfect SPARTN data feed to the Facet from GNSS Master over a USB cable, without having to use u-center after each reboot/powerup.
Your workbench
- RTK firmware 3.9
- What radios are you using: none - USB OTG cable from Facet to Android phone
- Are there any additional details that may help us help you? ZED-F9P firmware version 1.32
Steps to reproduce
reboot or powerup the Facet - the ZED-F9P setting for CFG-USBINPROT-SPARTN gets overwritten to 0, needs to be 1 to get PointPerfect SPARTN feed over USB cable.
Expected behavior
The configuration utility would provide a setting where either the existing CFG-USBINPROT-SPARTN setting is not overwritten or is set to 1
Actual behavior
see "steps to reproduce"