Show Profile Number on display

[skyviewaerials]

Subject of the issue

A number to indicate which profile is being used on the Facet RTK screen.

Your workbench

v3.8, v1.32

Bluetooth, WiFi, SW Maps transmitting NTRIP back to the device

Steps to reproduce

The number for the profile could be placed where the recount number is for debugging, maybe a dash under the number to indicate it is a profile and not the reset number? It could flash between the profile number and the debug number when debugging?

Expected behavior

When the unit starts the number displayed would be the profile in use.

Actual behavior

The unit starts and there isn't any indication of the profile in use at the moment.

[nseidle]

Thanks for asking! This is a reasonable request.

maybe a dash under the number

This is a good idea but requires custom fonts which we're not able to do at this time.

The number of characters is pretty limited to 6 (usually). Do you think '3_MyPr' is recognizable for 'MyProfile' in profile #3?

[skyviewaerials]

That sounds like a good way to do it, since my profiles are for different city locations, ie: Fullerton is profiles #4 that would show as '4_Full'.

[nseidle]

This has been fixed in v3.10.

[skyviewaerials]

That is great, I see there is an extra space before the number 5 profile.
Additionally can the profile number be shown on the display while the Facet is functioning?
I was thinking it could go in the same spot as the debug reset counter? The debug counter could flash or a dashed line under the number to differentiate it from the profile number?
Thanks for all the hard work on such an exciting product.

[nseidle]

I see there is an extra space before the number 5 profile.

What is your #5 profile name? The text is centered so you may see '5_ABC' centered (spaced before/after) for shorter profile names.

Additionally can the profile number be shown on the display while the Facet is functioning?

Please create a new request.

Thanks for all the hard work on such an exciting product.

Flattery will get you everywhere, including feature requests. Thank you for saying thank you!

[skyviewaerials]

I checked my profiles and the issue is with 5_emlid, would this cause the extra space to show in front of the number?

I will put in a new feature request, and again keep up the good work.