[Doc] Fixed typos and improved cross-referencing in ppo tutorial

intermediate_source/reinforcement_ppo.py

@@ -16,7 +16,7 @@
 Key learnings:
 
 - How to create an environment in TorchRL, transform its outputs, and collect data from this environment;
-- How to make your classes talk to each other using :class:`tensordict.TensorDict`;
+- How to make your classes talk to each other using :class:`~tensordict.TensorDict`;
 - The basics of building your training loop with TorchRL:
 
   - How to compute the advantage signal for policy gradient methods;
@@ -56,7 +56,7 @@
 # problem rather than re-inventing the wheel every time you want to train a policy.
 #
 # For completeness, here is a brief overview of what the loss computes, even though
-# this is taken care of by our :class:`ClipPPOLoss` module—the algorithm works as follows:
+# this is taken care of by our :class:`~torchrl.objectives.ClipPPOLoss` module—the algorithm works as follows:
 # 1. we will sample a batch of data by playing the
 # policy in the environment for a given number of steps.
 # 2. Then, we will perform a given number of optimization steps with random sub-samples of this batch using
@@ -99,7 +99,7 @@
 # 5. Finally, we will run our training loop and analyze the results.
 #
 # Throughout this tutorial, we'll be using the :mod:`tensordict` library.
-# :class:`tensordict.TensorDict` is the lingua franca of TorchRL: it helps us abstract
+# :class:`~tensordict.TensorDict` is the lingua franca of TorchRL: it helps us abstract
 # what a module reads and writes and care less about the specific data
 # description and more about the algorithm itself.
 #
@@ -115,13 +115,8 @@
 from torchrl.data.replay_buffers import ReplayBuffer
 from torchrl.data.replay_buffers.samplers import SamplerWithoutReplacement
 from torchrl.data.replay_buffers.storages import LazyTensorStorage
-from torchrl.envs import (
-    Compose,
-    DoubleToFloat,
-    ObservationNorm,
-    StepCounter,
-    TransformedEnv,
-)
+from torchrl.envs import (Compose, DoubleToFloat, ObservationNorm, StepCounter,
+                          TransformedEnv)
 from torchrl.envs.libs.gym import GymEnv
 from torchrl.envs.utils import check_env_specs, set_exploration_mode
 from torchrl.modules import ProbabilisticActor, TanhNormal, ValueOperator
@@ -143,7 +138,7 @@
 #
 
 device = "cpu" if not torch.has_cuda else "cuda:0"
-num_cells = 256  # number of cells in each layer
+num_cells = 256  # number of cells in each layer i.e. output dim.
 lr = 3e-4
 max_grad_norm = 1.0
 
@@ -231,8 +226,8 @@
 # We will append some transforms to our environments to prepare the data for
 # the policy. In Gym, this is usually achieved via wrappers. TorchRL takes a different
 # approach, more similar to other pytorch domain libraries, through the use of transforms.
-# To add transforms to an environment, one should simply wrap it in a :class:`TransformedEnv`
-# instance, and append the sequence of transforms to it. The transformed environment will inherit
+# To add transforms to an environment, one should simply wrap it in a :class:`~torchrl.envs.transforms.TransformedEnv`
+# instance and append the sequence of transforms to it. The transformed environment will inherit
 # the device and meta-data of the wrapped environment, and transform these depending on the sequence
 # of transforms it contains.
 #
@@ -245,13 +240,13 @@
 # run a certain number of random steps in the environment and compute
 # the summary statistics of these observations.
 #
-# We'll append two other transforms: the :class:`DoubleToFloat` transform will
+# We'll append two other transforms: the :class:`~torchrl.envs.transforms.DoubleToFloat` transform will
 # convert double entries to single-precision numbers, ready to be read by the
-# policy. The :class:`StepCounter` transform will be used to count the steps before
+# policy. The :class:`~torchrl.envs.transforms.StepCounter` transform will be used to count the steps before
 # the environment is terminated. We will use this measure as a supplementary measure
 # of performance.
 #
-# As we will see later, many of the TorchRL's classes rely on :class:`tensordict.TensorDict`
+# As we will see later, many of the TorchRL's classes rely on :class:`~tensordict.TensorDict`
 # to communicate. You could think of it as a python dictionary with some extra
 # tensor features. In practice, this means that many modules we will be working
 # with need to be told what key to read (``in_keys``) and what key to write
@@ -274,13 +269,13 @@
 
 ######################################################################
 # As you may have noticed, we have created a normalization layer but we did not
-# set its normalization parameters. To do this, :class:`ObservationNorm` can
+# set its normalization parameters. To do this, :class:`~torchrl.envs.transforms.ObservationNorm` can
 # automatically gather the summary statistics of our environment:
 #
 env.transform[0].init_stats(num_iter=1000, reduce_dim=0, cat_dim=0)
 
 ######################################################################
-# The :class:`ObservationNorm` transform has now been populated with a
+# The :class:`~torchrl.envs.transforms.ObservationNorm` transform has now been populated with a
 # location and a scale that will be used to normalize the data.
 #
 # Let us do a little sanity check for the shape of our summary stats:
@@ -294,7 +289,8 @@
 # For efficiency purposes, TorchRL is quite stringent when it comes to
 # environment specs, but you can easily check that your environment specs are
 # adequate.
-# In our example, the :class:`GymWrapper` and :class:`GymEnv` that inherits
+# In our example, the :class:`~torchrl.envs.libs.gym.GymWrapper` and
+# :class:`~torchrl.envs.libs.gym.GymEnv` that inherits
 # from it already take care of setting the proper specs for your environment so
 # you should not have to care about this.
 #
@@ -327,9 +323,9 @@
 # action as input, and outputs an observation, a reward and a done state. The
 # observation may be composite, meaning that it could be composed of more than one
 # tensor. This is not a problem for TorchRL, since the whole set of observations
-# is automatically packed in the output :class:`tensordict.TensorDict`. After executing a rollout
+# is automatically packed in the output :class:`~tensordict.TensorDict`. After executing a rollout
 # (for example, a sequence of environment steps and random action generations) over a given
-# number of steps, we will retrieve a :class:`tensordict.TensorDict` instance with a shape
+# number of steps, we will retrieve a :class:`~tensordict.TensorDict` instance with a shape
 # that matches this trajectory length:
 #
 rollout = env.rollout(3)
@@ -339,7 +335,7 @@
 ######################################################################
 # Our rollout data has a shape of ``torch.Size([3])``, which matches the number of steps
 # we ran it for. The ``"next"`` entry points to the data coming after the current step.
-# In most cases, the ``"next""`` data at time `t` matches the data at ``t+1``, but this
+# In most cases, the ``"next"`` data at time `t` matches the data at ``t+1``, but this
 # may not be the case if we are using some specific transformations (for example, multi-step).
 #
 # Policy
@@ -364,12 +360,11 @@
 #
 # We design the policy in three steps:
 #
-# 1. Define a neural network ``D_obs`` -> ``2 * D_action``. Indeed, our ``loc`` (mu) and ``scale`` (sigma) both have dimension ``D_action``;
+# 1. Define a neural network ``D_obs`` -> ``2 * D_action``. Indeed, our ``loc`` (mu) and ``scale`` (sigma) both have dimension ``D_action``.
 #
-# 2. Append a :class:`NormalParamExtractor` to extract a location and a scale (for example, splits the input in two equal parts
-#   and applies a positive transformation to the scale parameter);
+# 2. Append a :class:`~tensordict.nn.distributions.NormalParamExtractor` to extract a location and a scale (for example, splits the input in two equal parts and applies a positive transformation to the scale parameter).
 #
-# 3. Create a probabilistic :class:`TensorDictModule` that can create this distribution and sample from it.
+# 3. Create a probabilistic :class:`~tensordict.nn.TensorDictModule` that can generate this distribution and sample from it.
 #
 
 actor_net = nn.Sequential(
@@ -385,7 +380,7 @@
 
 ######################################################################
 # To enable the policy to "talk" with the environment through the ``tensordict``
-# data carrier, we wrap the ``nn.Module`` in a :class:`TensorDictModule`. This
+# data carrier, we wrap the ``nn.Module`` in a :class:`~tensordict.nn.TensorDictModule`. This
 # class will simply ready the ``in_keys`` it is provided with and write the
 # outputs in-place at the registered ``out_keys``.
 #
@@ -395,18 +390,19 @@
 
 ######################################################################
 # We now need to build a distribution out of the location and scale of our
-# normal distribution. To do so, we instruct the :class:`ProbabilisticActor`
-# class to build a :class:`TanhNormal` out of the location and scale
+# normal distribution. To do so, we instruct the
+# :class:`~torchrl.modules.tensordict_module.ProbabilisticActor`
+# class to build a :class:`~torchrl.modules.TanhNormal` out of the location and scale
 # parameters. We also provide the minimum and maximum values of this
 # distribution, which we gather from the environment specs.
 #
 # The name of the ``in_keys`` (and hence the name of the ``out_keys`` from
-# the :class:`TensorDictModule` above) cannot be set to any value one may
-# like, as the :class:`TanhNormal` distribution constructor will expect the
+# the :class:`~tensordict.nn.TensorDictModule` above) cannot be set to any value one may
+# like, as the :class:`~torchrl.modules.TanhNormal` distribution constructor will expect the
 # ``loc`` and ``scale`` keyword arguments. That being said,
-# :class:`ProbabilisticActor` also accepts ``Dict[str, str]`` typed ``in_keys``
-# where the key-value pair indicates what ``in_key`` string should be used for
-# every keyword argument that is to be used.
+# :class:`~torchrl.modules.tensordict_module.ProbabilisticActor` also accepts
+# ``Dict[str, str]`` typed ``in_keys`` where the key-value pair indicates
+# what ``in_key`` string should be used for every keyword argument that is to be used.
 #
 policy_module = ProbabilisticActor(
     module=policy_module,
@@ -450,7 +446,7 @@
 
 ######################################################################
 # let's try our policy and value modules. As we said earlier, the usage of
-# :class:`TensorDictModule` makes it possible to directly read the output
+# :class:`~tensordict.nn.TensorDictModule` makes it possible to directly read the output
 # of the environment to run these modules, as they know what information to read
 # and where to write it:
 #
@@ -461,29 +457,30 @@
 # Data collector
 # --------------
 #
-# TorchRL provides a set of :class:`DataCollector` classes. Briefly, these
-# classes execute three operations: reset an environment, compute an action
-# given the latest observation, execute a step in the environment, and repeat
-# the last two steps until the environment reaches a stop signal (or ``"done"``
-# state).
+# TorchRL provides a set of `DataCollector classes <https://pytorch.org/rl/reference/collectors.html>`__.
+# Briefly, these classes execute three operations: reset an environment,
+# compute an action given the latest observation, execute a step in the environment,
+# and repeat the last two steps until the environment signals a stop (or reaches
+# a done state).
 #
 # They allow you to control how many frames to collect at each iteration
 # (through the ``frames_per_batch`` parameter),
 # when to reset the environment (through the ``max_frames_per_traj`` argument),
 # on which ``device`` the policy should be executed, etc. They are also
 # designed to work efficiently with batched and multiprocessed environments.
 #
-# The simplest data collector is the :class:`SyncDataCollector`: it is an
-# iterator that you can use to get batches of data of a given length, and
+# The simplest data collector is the :class:`~torchrl.collectors.collectors.SyncDataCollector`:
+# it is an iterator that you can use to get batches of data of a given length, and
 # that will stop once a total number of frames (``total_frames``) have been
 # collected.
-# Other data collectors (``MultiSyncDataCollector`` and
-# ``MultiaSyncDataCollector``) will execute the same operations in synchronous
-# and asynchronous manner over a set of multiprocessed workers.
+# Other data collectors (:class:`~torchrl.collectors.collectors.MultiSyncDataCollector` and
+# :class:`~torchrl.collectors.collectors.MultiaSyncDataCollector`) will execute
+# the same operations in synchronous and asynchronous manner over a
+# set of multiprocessed workers.
 #
 # As for the policy and environment before, the data collector will return
-# :class:`tensordict.TensorDict` instances with a total number of elements that will
-# match ``frames_per_batch``. Using :class:`tensordict.TensorDict` to pass data to the
+# :class:`~tensordict.TensorDict` instances with a total number of elements that will
+# match ``frames_per_batch``. Using :class:`~tensordict.TensorDict` to pass data to the
 # training loop allows you to write data loading pipelines
 # that are 100% oblivious to the actual specificities of the rollout content.
 #
@@ -506,10 +503,10 @@
 # of epochs.
 #
 # TorchRL's replay buffers are built using a common container
-# :class:`ReplayBuffer` which takes as argument the components of the buffer:
-# a storage, a writer, a sampler and possibly some transforms. Only the
-# storage (which indicates the replay buffer capacity) is mandatory. We
-# also specify a sampler without repetition to avoid sampling multiple times
+# :class:`~torchrl.data.ReplayBuffer` which takes as argument the components
+# of the buffer: a storage, a writer, a sampler and possibly some transforms.
+# Only the storage (which indicates the replay buffer capacity) is mandatory.
+# We also specify a sampler without repetition to avoid sampling multiple times
 # the same item in one epoch.
 # Using a replay buffer for PPO is not mandatory and we could simply
 # sample the sub-batches from the collected batch, but using these classes
@@ -526,7 +523,7 @@
 # -------------
 #
 # The PPO loss can be directly imported from TorchRL for convenience using the
-# :class:`ClipPPOLoss` class. This is the easiest way of utilizing PPO:
+# :class:`~torchrl.objectives.ClipPPOLoss` class. This is the easiest way of utilizing PPO:
 # it hides away the mathematical operations of PPO and the control flow that
 # goes with it.
 #
@@ -540,7 +537,7 @@
 # ``"value_target"`` entries.
 # The ``"value_target"`` is a gradient-free tensor that represents the empirical
 # value that the value network should represent with the input observation.
-# Both of these will be used by :class:`ClipPPOLoss` to
+# Both of these will be used by :class:`~torchrl.objectives.ClipPPOLoss` to
 # return the policy and value losses.
 #
 
@@ -693,7 +690,7 @@
 #
 # * From an efficiency perspective,
 #   we could run several simulations in parallel to speed up data collection.
-#   Check :class:`torchrl.envs.ParallelEnv` for further information.
+#   Check :class:`~torchrl.envs.ParallelEnv` for further information.
 #
 # * From a logging perspective, one could add a :class:`torchrl.record.VideoRecorder` transform to
 #   the environment after asking for rendering to get a visual rendering of the