Rework mailer settings

cmd/admin.go

@@ -414,9 +414,9 @@ var (
 			Usage: "SMTP Authentication Type (PLAIN/LOGIN/CRAM-MD5) default PLAIN",
 		},
 		cli.StringFlag{
-			Name:  "host",
+			Name:  "addr",
 			Value: "",
-			Usage: "SMTP Host",
+			Usage: "SMTP Addr",
 		},
 		cli.IntFlag{
 			Name:  "port",
@@ -956,8 +956,8 @@ func parseSMTPConfig(c *cli.Context, conf *smtp.Source) error {
 		}
 		conf.Auth = c.String("auth-type")
 	}
-	if c.IsSet("host") {
-		conf.Host = c.String("host")
+	if c.IsSet("addr") {
+		conf.Addr = c.String("addr")
 	}
 	if c.IsSet("port") {
 		conf.Port = c.Int("port")

custom/conf/app.example.ini

@@ -1499,39 +1499,50 @@ ROUTER = console
 ;; Prefix displayed before subject in mail
 ;SUBJECT_PREFIX =
 ;;
-;; Mail server
-;; Gmail: smtp.gmail.com:587
-;; QQ: smtp.qq.com:465
-;; As per RFC 8314 using Implicit TLS/SMTPS on port 465 (if supported) is recommended,
-;; otherwise STARTTLS on port 587 should be used.
-;HOST =
-;;
-;; Disable HELO operation when hostnames are different.
-;DISABLE_HELO =
-;;
-;; Custom hostname for HELO operation, if no value is provided, one is retrieved from system.
+;; NOTICE: many options are new in 1.18. For old Gitea, please refer to old app.example.ini
+;; eg: https://github.com/go-gitea/gitea/blob/release/v1.17/custom/conf/app.example.ini
+;;
+;; Mail server protocol. One of "smtp", "smtps", "smtp+startls", "smtp+unix", "sendmail", "dummy".
+;; - sendmail: use the operating system's `sendmail` command instead of SMTP. This is common on Linux systems.
+;; - dummy: send email messages to the log as a testing phase.
+;; If your provider does not explicitly say which protocol it uses but does provide a port,
+;; you can set SMTP_PORT instead and this will be inferred.
+;PROTOCOL =
+;;
+;; Mail server address, e.g. smtp.gmail.com.
+;; For smtp+unix, this should be a path to a unix socket instead.
+;SMTP_ADDR =
+;;
+;; Mail server port. Common ports are:
+;;   25:  insecure SMTP
+;;   465: SMTP Secure
+;;   587: StartTLS
+;; If no protocol is specified, it will be inferred by this setting.
+;SMTP_PORT =
+;;
+;; Enable HELO operation. Defaults to true.
+;ENABLE_HELO = true
+;;
+;; Custom hostname for HELO operation.
+;; If no value is provided, one is retrieved from system.
 ;HELO_HOSTNAME =
 ;;
-;; Whether or not to skip verification of certificates; `true` to disable verification. This option is unsafe. Consider adding the certificate to the system trust store instead.
-;SKIP_VERIFY = false
+;; If set to `true`, completely ignores server certificate validation errors.
+;; This option is unsafe. Consider adding the certificate to the system trust store instead.
+;FORCE_TRUST_SERVER_CERT = false
 ;;
-;; Use client certificate
-;USE_CERTIFICATE = false
-;CERT_FILE = custom/mailer/cert.pem
-;KEY_FILE = custom/mailer/key.pem
-;;
-;; Should SMTP connect with TLS, (if port ends with 465 TLS will always be used.)
-;; If this is false but STARTTLS is supported the connection will be upgraded to TLS opportunistically.
-;IS_TLS_ENABLED = false
+;; Use client certificate in connection.
+;USE_CLIENT_CERT = false
+;CLIENT_CERT_FILE = custom/mailer/cert.pem
+;CLIENT_KEY_FILE = custom/mailer/key.pem
 ;;
 ;; Mail from address, RFC 5322. This can be just an email address, or the `"Name" <email@example.com>` format
 ;FROM =
 ;;
 ;; Sometimes it is helpful to use a different address on the envelope. Set this to use ENVELOPE_FROM as the from on the envelope. Set to `<>` to send an empty address.
 ;ENVELOPE_FROM =
 ;;
-;; Mailer user name and password
-;; Please Note: Authentication is only supported when the SMTP server communication is encrypted with TLS (this can be via STARTTLS) or `HOST=localhost`.
+;; Mailer user name and password, if required by provider.
 ;USER =
 ;;
 ;; Use PASSWD = `your password` for quoting if you use special characters in the password.
@@ -1540,9 +1551,6 @@ ROUTER = console
 ;; Send mails as plain text
 ;SEND_AS_PLAIN_TEXT = false
 ;;
-;; Set Mailer Type (either SMTP, sendmail or dummy to just send to the log)
-;MAILER_TYPE = smtp
-;;
 ;; Specify an alternative sendmail binary
 ;SENDMAIL_PATH = sendmail
 ;;

docs/content/doc/advanced/config-cheat-sheet.en-us.md

@@ -644,42 +644,39 @@ Define allowed algorithms and their minimum key length (use -1 to disable a type
 
 ## Mailer (`mailer`)
 
+_NOTICE: **many options are new in 1.18**. For old Gitea, please refer to old app.example.ini.
+eg: https://github.com/go-gitea/gitea/blob/release/v1.17/custom/conf/app.example.ini_
+
 - `ENABLED`: **false**: Enable to use a mail service.
-- `DISABLE_HELO`: **\<empty\>**: Disable HELO operation.
-- `HELO_HOSTNAME`: **\<empty\>**: Custom hostname for HELO operation.
-- `HOST`: **\<empty\>**: SMTP mail host address and port (example: smtp.gitea.io:587).
-  - As per RFC 8314, if supported, Implicit TLS/SMTPS on port 465 is recommended, otherwise opportunistic TLS via STARTTLS on port 587 should be used.
-- `IS_TLS_ENABLED` :  **false** : Forcibly use TLS to connect even if not on a default SMTPS port.
-  - Note, if the port ends with `465` Implicit TLS/SMTPS/SMTP over TLS will be used despite this setting.
-  - Otherwise if `IS_TLS_ENABLED=false` and the server supports `STARTTLS` this will be used. Thus if `STARTTLS` is preferred you should set `IS_TLS_ENABLED=false`.
-- `FROM`: **\<empty\>**: Mail from address, RFC 5322. This can be just an email address, or
-   the "Name" \<email@example.com\> format.
-- `ENVELOPE_FROM`: **\<empty\>**: Address set as the From address on the SMTP mail envelope. Set to `<>` to send an empty address.
+- `PROTOCOL`: **\<empty\>**: Mail server protocol. One of "smtp", "smtps", "smtp+startls", "smtp+unix", "sendmail", "dummy".
+  - SMTP family, if your provider does not explicitly say which protocol it uses but does provide a port, you can set SMTP_PORT instead and this will be inferred.
+  - **sendmail** Use the operating system's `sendmail` command instead of SMTP. This is common on Linux systems.
+  - **dummy** Send email messages to the log as a testing phase.
+  - Note that enabling sendmail will ignore all other `mailer` settings except `ENABLED`, `FROM`, `SUBJECT_PREFIX` and `SENDMAIL_PATH`.
+  - Enabling dummy will ignore all settings except `ENABLED`, `SUBJECT_PREFIX` and `FROM`.
+- `SMTP_ADDR`: **\<empty\>**: Mail server address. e.g. smtp.gmail.com. For smtp+unix, this should be a path to a unix socket instead.
+- `SMTP_PORT`: **\<empty\>**: Mail server port. If no protocol is specified, it will be inferred by this setting. Common ports are:
+  - 25:  insecure SMTP
+  - 465: SMTP Secure
+  - 587: StartTLS
+- `USE_CLIENT_CERT`: **false**: Use client certificate for TLS/SSL.
+- `CLIENT_CERT_FILE`: **custom/mailer/cert.pem**: Client certificate file.
+- `CLIENT_KEY_FILE`: **custom/mailer/key.pem**: Client key file.
+- `FORCE_TRUST_SERVER_CERT`: **false**: If set to `true`, completely ignores server certificate validation errors. This option is unsafe. Consider adding the certificate to the system trust store instead.
 - `USER`: **\<empty\>**: Username of mailing user (usually the sender's e-mail address).
 - `PASSWD`: **\<empty\>**: Password of mailing user.  Use \`your password\` for quoting if you use special characters in the password.
-  - Please note: authentication is only supported when the SMTP server communication is encrypted with TLS (this can be via `STARTTLS`) or `HOST=localhost`. See [Email Setup]({{< relref "doc/usage/email-setup.en-us.md" >}}) for more information.
-- `SEND_AS_PLAIN_TEXT`: **false**: Send mails as plain text.
-- `SKIP_VERIFY`: **false**: Whether or not to skip verification of certificates; `true` to disable verification.
-  - **Warning:** This option is unsafe. Consider adding the certificate to the system trust store instead.
-  - **Note:** Gitea only supports SMTP with STARTTLS.
-- `USE_CERTIFICATE`: **false**: Use client certificate.
-- `CERT_FILE`: **custom/mailer/cert.pem**
-- `KEY_FILE`: **custom/mailer/key.pem**
+  - Please note: authentication is only supported when the SMTP server communication is encrypted with TLS (this can be via `STARTTLS`) or SMTP host is localhost. See [Email Setup]({{< relref "doc/usage/email-setup.en-us.md" >}}) for more information.
+- `ENABLE_HELO`: **true**: Enable HELO operation.
+- `HELO_HOSTNAME`: **(retrieved from system)**: HELO hostname.
+- `FROM`: **\<empty\>**: Mail from address, RFC 5322. This can be just an email address, or the "Name" \<email@example.com\> format.
+- `ENVELOPE_FROM`: **\<empty\>**: Address set as the From address on the SMTP mail envelope. Set to `<>` to send an empty address.
 - `SUBJECT_PREFIX`: **\<empty\>**: Prefix to be placed before e-mail subject lines.
-- `MAILER_TYPE`: **smtp**: \[smtp, sendmail, dummy\]
-  - **smtp** Use SMTP to send mail
-  - **sendmail** Use the operating system's `sendmail` command instead of SMTP.
-   This is common on Linux systems.
-  - **dummy** Send email messages to the log as a testing phase.
-  - Note that enabling sendmail will ignore all other `mailer` settings except `ENABLED`,
-     `FROM`, `SUBJECT_PREFIX` and `SENDMAIL_PATH`.
-  - Enabling dummy will ignore all settings except `ENABLED`, `SUBJECT_PREFIX` and `FROM`.
-- `SENDMAIL_PATH`: **sendmail**: The location of sendmail on the operating system (can be
-   command or full path).
-- `SENDMAIL_ARGS`: **_empty_**: Specify any extra sendmail arguments. (NOTE: you should be aware that email addresses can look like options - if your `sendmail` command takes options you must set the option terminator `--`)
+- `SENDMAIL_PATH`: **sendmail**: The location of sendmail on the operating system (can be command or full path).
+- `SENDMAIL_ARGS`: **\<empty\>**: Specify any extra sendmail arguments. (NOTE: you should be aware that email addresses can look like options - if your `sendmail` command takes options you must set the option terminator `--`)
 - `SENDMAIL_TIMEOUT`: **5m**: default timeout for sending email through sendmail
 - `SENDMAIL_CONVERT_CRLF`: **true**: Most versions of sendmail prefer LF line endings rather than CRLF line endings. Set this to false if your version of sendmail requires CRLF line endings.
 - `SEND_BUFFER_LEN`: **100**: Buffer length of mailing queue. **DEPRECATED** use `LENGTH` in `[queue.mailer]`
+- `SEND_AS_PLAIN_TEXT`: **false**: Send e-mail as plain text.
 
 ## Cache (`cache`)