RainMaker support for ESP32-S2, S3 and C3.

[pedrominatel]

Board

ESP32-S2, ESP32-S3 and ESP32-C3

Device Description

ESP32-S2-DevKitC-1
ESP32-S3-DevKitC-1
ESP32-C3 Rust Board (custom board)

Hardware Configuration

Nothing connected.

Version

other

IDE Name

Arduino IDE

Operating System

Linux

Flash frequency

80MHz

PSRAM enabled

no

Upload speed

921600

Description

• Add RainMaker partition table scheme on each generic board.
• Change the provisioning method for ESP32-S2 to WiFi and for S3 and C3 BLE.

Sketch

RMakerSwitch.ino

Debug Message

N/A

Other Steps to Reproduce

N/A

I have checked existing issues, online documentation and the Troubleshooting Guide

• I confirm I have checked existing issues, online documentation and Troubleshooting guide.

[me-no-dev]

rainmaker_partitions.patch.zip
here is the patch for the partition scheme support on all boards

[VojtechBartoska]

Probably related issue which can be closed by this one: #6435

[pedrominatel]

Not sure @VojtechBartoska. I'll test on ESP32 and try to reproduce the #6435.