ESP32S2 Dev Module detected ad Deneyap Mini

[colde]

Board

ESP32S2 Dev Module

Device Description

Some hardware presents itself as an ESP32S2 Dev Module at times when they are being set into flashing mode and uses the built-in USB driver, i've seen this with Wemos S2 Pico, and i believe i've also encountered it with Unexpected Maker's FeatherS2.

Hardware Configuration

Not relevant

Version

latest master

IDE Name

Arduino IDE 2.0.0-rc3

Operating System

MacOS

Flash frequency

Not relevant

PSRAM enabled

yes

Upload speed

Not relevant

Description

When ever hardware that presents itself as ESP32S2 Dev Module, Arduino will detect it as a Deneyap Mini, as Deneyap Mini re-uses the same PID and VID.

I propose that the Deneyap Mini PID and VID get's less priority, so that board are primarily detected as ESP32S2 dev modules by default instead.

Sketch

Not relevant

Debug Message

Not relevant

Other Steps to Reproduce

Attach a ESP32S2 Dev Module to the Arduino 2.0.0-rc3 IDE and it will detect it as a Deneyap Mini

I have checked existing issues, online documentation and the Troubleshooting Guide

• I confirm I have checked existing issues, online documentation and Troubleshooting guide.

[Jason2866]

Since 2.0.0 rc3 a lot has been changed / fixed. Have you tried with the actual 2.0.2?
Even better would be to use actual git version

[colde]

I don't think there is a 2.0.2 version of the Arduino IDE.
For the additional boards manager, I'm using the URL https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json which does seem to point to 2.0.2.
The problem to me looks like the deneyap mini is squatting on the official USB pid.

[me-no-dev]

the very top version of the link you posted does include 2.0.2 :)

many boards will end up with the same pid/vid BTW... we will see how we will deal with this in near future.

[VojtechBartoska]

Hello, sorry for late reply. Are you able to retest this with Arduino core ESP32 version 2.0.3-rc1? Thanks!

[VojtechBartoska]

I'm closing the issue as expired due to no answer.

If needed, please reopen it.

Thanks for understanding.

[OmpaOmpa]

This is still true for version 2.0.7
Seems like all unbranded ESP32S2 are wrongly identified as Deneyap Mini who uses the default ESP32S2 pid. I to suggest prioritizing the standard Dev Module available world wide above a product available only in turkey.

[Serendo]

I find that the problem is with this api that arduino-cli uses, it gives the wrong result.

curl -s https://builder.arduino.cc/v3/boards/byVidPid/0x303A/0x0002 

{"architecture":"esp32","fqbn":"esp32:esp32:deneyapmini","href":"/v3/boards/esp32:esp32:deneyapmini","id":"deneyapmini","menus":[{"id":"UploadSpeed","name":"Upload Speed","variants":[{"id":"921600","name":"921600"},{"id":"115200","name":"115200"},{"id":"230400","name":"230400"},{"id":"460800","name":"460800"}]},{"id":"CDCOnBoot","name":"USB CDC On Boot","variants":[{"id":"default","name":"Enabled"},{"id":"cdc","name":"Disabled"}]},{"id":"MSCOnBoot","name":"USB Firmware MSC On Boot","variants":[{"id":"default","name":"Disabled"},{"id":"msc","name":"Enabled"}]},{"id":"DFUOnBoot","name":"USB DFU On Boot","variants":[{"id":"default","name":"Disabled"},{"id":"dfu","name":"Enabled"}]},{"id":"UploadMode","name":"Upload Mode","variants":[{"id":"default","name":"Internal USB"},{"id":"cdc","name":"UART0"}]},{"id":"CPUFreq","name":"CPU Frequency","variants":[{"id":"240","name":"240MHz (WiFi)"},{"id":"160","name":"160MHz (WiFi)"},{"id":"80","name":"80MHz (WiFi)"},{"id":"40","name":"40MHz"},{"id":"20","name":"20MHz"},{"id":"10","name":"10MHz"}]},{"id":"FlashFreq","name":"Flash Frequency","variants":[{"id":"80","name":"80MHz"},{"id":"40","name":"40MHz"}]},{"id":"FlashMode","name":"Flash Mode","variants":[{"id":"qio","name":"QIO"},{"id":"dio","name":"DIO"},{"id":"qout","name":"QOUT"},{"id":"dout","name":"DOUT"}]},{"id":"FlashSize","name":"Flash Size","variants":[{"id":"4M","name":"4MB (32Mb)"},{"id":"8M","name":"8MB (64Mb)"},{"id":"2M","name":"2MB (16Mb)"},{"id":"16M","name":"16MB (128Mb)"}]},{"id":"PartitionScheme","name":"Partition Scheme","variants":[{"id":"default","name":"Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)"},{"id":"defaultffat","name":"Default 4MB with ffat (1.2MB APP/1.5MB FATFS)"},{"id":"default_8MB","name":"8M with spiffs (3MB APP/1.5MB SPIFFS)"},{"id":"minimal","name":"Minimal (1.3MB APP/700KB SPIFFS)"},{"id":"no_ota","name":"No OTA (2MB APP/2MB SPIFFS)"},{"id":"noota_3g","name":"No OTA (1MB APP/3MB SPIFFS)"},{"id":"noota_ffat","name":"No OTA (2MB APP/2MB FATFS)"},{"id":"noota_3gffat","name":"No OTA (1MB APP/3MB FATFS)"},{"id":"huge_app","name":"Huge APP (3MB No OTA/1MB SPIFFS)"},{"id":"min_spiffs","name":"Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)"},{"id":"fatflash","name":"16M Flash (2MB APP/12.5MB FATFS)"},{"id":"app3M_fat9M_16MB","name":"16M Flash (3MB APP/9.9MB FATFS)"}]},{"id":"DebugLevel","name":"Core Debug Level","variants":[{"id":"none","name":"None"},{"id":"error","name":"Error"},{"id":"warn","name":"Warn"},{"id":"info","name":"Info"},{"id":"debug","name":"Debug"},{"id":"verbose","name":"Verbose"}]},{"id":"PSRAM","name":"PSRAM","variants":[{"id":"disabled","name":"Disabled"},{"id":"enabled","name":"Enabled"}]},{"id":"EraseFlash","name":"Erase All Flash Before Sketch Upload","variants":[{"id":"none","name":"Disabled"},{"id":"all","name":"Enabled"}]}],"name":"Deneyap Mini","package":"esp32","plan":"create-free"}

[Lehna291]

Hi there,

I´m encountering the same issue:

--> Dev Board is detected as Deneyap Mini.
I´m using the following hardware: Waveshare ESP32-S2 Dev. Board with the Arduino IDE 2.1.1 and the ESP32 Core 2.0.11. and as board in the board manager i choose ESP32S2 Dev Module.

A workaround could be, that i exchange the pins_arduino.h file in the variants-deneyap folder, so i can use it as a "normal dev board".
But maybe every time there is an update on the ESP Core the files in the variant folder will be overwritten.