Description
Board
ESP32-S3
Device Description
own ESP32s3-wroom LED output schema
Hardware Configuration
#define ETH_PHY_TYPE ETH_PHY_W5500
#define ETH_PHY_ADDR 1
#define ETH_PHY_CS 10
#define ETH_PHY_IRQ 9
#define ETH_PHY_RST 14
#define ETH_PHY_SPI_HOST SPI2_HOST
#define ETH_PHY_SPI_SCK 12
#define ETH_PHY_SPI_MISO 13
#define ETH_PHY_SPI_MOSI 11
Version
latest master (checkout manually)
IDE Name
Arduino IDE 2.3.2
Operating System
Ubuntu 24.04
Flash frequency
240MHz
PSRAM enabled
yes
Upload speed
115200
Description
I have problem with <ETH.h> and W5500. I use W5500-io modul and everything running fine (elegantOTA, async webserver, artnet, sacn) until I send more package from lighting console. No matter if it by sACN or ArtNet. If I use WiFi and send everything running without crash, but after I switch to Ethernet it send me this and restart ESP.
Sketch
#include <WiFi.h>
#include <ETH.h>
#include <ArtnetETH.h>
#include <sACN.h>
void setup() {
Network.onEvent(onEvent);
WiFi.begin();
WiFi.mode(WIFI_AP);
WiFi.softAP(ssid_ap, password_ap);
WiFi.softAPConfig(WIFI_IP_ADDR, AP_GATEWAY_IP, AP_NETWORK_MASK);
ETH.begin(ETH_PHY_TYPE, ETH_PHY_ADDR, mac, ETH_PHY_CS, ETH_PHY_IRQ, ETH_PHY_RST, ETH_PHY_SPI_HOST, ETH_PHY_SPI_SCK, ETH_PHY_SPI_MISO, ETH_PHY_SPI_MOSI);
if (d_prt == "sACN") {
Serial.println("Startuji sACN");
recv.callbackDMX(sAcnDmxReceived);
recv.callbackSource(newSource);
recv.callbackFramerate(framerate);
recv.callbackTimeout(timeOut);
recv.begin(d_unv, false);
} else if (d_prt == "ArtNet") {
Serial.println("Startuji ArtNet");
artnet.begin();
artnet.subscribeArtDmxUniverse(net, subnet, d_unv-1, callback);
}
}
void loop() {
if (d_prt == "sACN") {
recv.receive();
} else if (d_prt == "ArtNet") {
artnet.parse();
}
}Debug Message
Guru Meditation Error: Core 1 panic'ed (Unhandled debug exception).
Debug exception reason: Stack canary watchpoint triggered (w5500_tsk)
Core 1 register dump:
PC : 0x40380712 PS : 0x00060236 A0 : 0x8037de72 A1 : 0x3fcad920
A2 : 0x3fcad298 A3 : 0xffffffff A4 : 0x00060223 A5 : 0x00060223
A6 : 0xb33fffff A7 : 0xb33fffff A8 : 0x80377b30 A9 : 0x3fcad900
A10 : 0x3fcad24c A11 : 0x00000804 A12 : 0x00000001 A13 : 0x00000004
A14 : 0x0000180c A15 : 0x3fca6b28 SAR : 0x00000004 EXCCAUSE: 0x00000001
EXCVADDR: 0x00000000 LBEG : 0x400556d5 LEND : 0x400556e5 LCOUNT : 0xfffffffd
Backtrace: 0x4038070f:0x3fcad920 0x4037de6f:0x3fcad950 0x4037e005:0x3fcad970 0x4037e22c:0x3fcad990 0x40378a9e:0x3fcad9b0 0x40378ae2:0x3fcad9d0 0x40378c09:0x3fcada10 0x4202ee8d:0x3fcada30 0x4202dd75:0x3fcada60 0x4202d791:0x3fcada80 0x420b19cd:0x3fcadaa0 0x420afea5:0x3fcadac0 0x420aff2a:0x3fcadae0 0x420b0ccf:0x3fcadb10 0x420c0c4f:0x3fcadb40 0x420b9fba:0x3fcadb60 0x420ba125:0x3fcade80 0x420cce75:0x3fcadeb0 0x4206fc97:0x3fcadee0 0x4206fcbd:0x3fcadf10 0x4205d0b5:0x3fcadf60 0x4038060e:0x3fcadfa0
Other Steps to Reproduce
No response
I have checked existing issues, online documentation and the Troubleshooting Guide
- I confirm I have checked existing issues, online documentation and Troubleshooting guide.