Update CH422G and add a new example

CHANGELOG.md

@@ -1,5 +1,11 @@
 # ChangeLog
 
+## v0.0.4 - 2024-10-18
+
+### Enhancements:
+
+* Update CH422G and add a new example to show how to use it (@H-sw123)
+
 ## v0.0.3 - 2024-05-07
 
 ### Enhancements:

examples/TestCH422G/TestCH422G.ino

@@ -0,0 +1,102 @@
+/**
+ * | Supported IO Expanders | CH422G |
+ * | ------------------------- | ------ |
+ *
+ * # CH422G Test Example
+ *
+ * The hardware device used in this example is waveshare ESP32-S3-Touch-LCD-4.3B-BOX. To test the simultaneous use of I/O input and OC output, connect DO0 to DI0, and connect DO1 to DI1.
+ *
+ * ## How to use
+ *
+ * 1. Enable USB CDC.
+ * 2. Verify and upload the example to your board.
+ *
+ * ## Serial Output
+ *
+ * ```
+ * ...
+ * Test begin
+ * Set the OC pin to push-pull output mode.
+ * Set the IO0-7 pin to input mode.
+ * Set pint 8 and 9 to:0, 1
+ *
+ * Read pin 0 and 5 level: 0, 1
+ *
+ * Set pint 8 and 9 to:1, 0
+ *
+ * Read pin 0 and 5 level: 1, 0
+ * ...
+ * ```
+ *
+ * ## Troubleshooting
+ *
+ * The driver initialization by default sets CH422G's IO0-7 to output high-level mode.
+  Since the input/output mode of CH422G's IO0-7 must remain consistent, the driver will only set IO0-7 to
+  input mode when it determines that all pins are configured as input.
+  Using pinMode and multiPinMode will be invalid. You can only set the pin working mode through enableAllIO_Input, enableAllIO_Output, enableOC_PushPull and enableOC_OpenDrain
+ *
+ */
+
+#include <Arduino.h>
+#include <ESP_IOExpander_Library.h>
+
+#define EXAMPLE_I2C_NUM     (0)
+#define EXAMPLE_I2C_SDA_PIN (8)
+#define EXAMPLE_I2C_SCL_PIN (9)
+#define EXAMPLE_I2C_ADDR    (ESP_IO_EXPANDER_I2C_CH422G_ADDRESS)
+
+ESP_IOExpander_CH422G *expander = NULL;
+
+void setup() {
+  Serial.begin(115200);
+  delay(1000);
+  Serial.println("Test begin");
+
+  expander = new ESP_IOExpander_CH422G((i2c_port_t)EXAMPLE_I2C_NUM, EXAMPLE_I2C_ADDR, EXAMPLE_I2C_SCL_PIN, EXAMPLE_I2C_SDA_PIN);
+  expander->init();
+  expander->begin();
+
+  /* For CH422G */
+  Serial.println("Set the OC pin to push-pull output mode.");
+  expander->enableOC_PushPull();
+
+  // Serial.println("Set the OC pin to open_drain output mode.");
+  // expander->enableOC_OpenDrain();
+
+  Serial.println("Set the IO0-7 pin to input mode.");
+  expander->enableAllIO_Input();
+
+  // Serial.println("Set the IO0-7 pin to output mode.");
+  // expander->enableAllIO_Output();
+}
+
+int level[2] = { 0, 0 };
+
+void loop() {
+  for (int i = 0; i < 100; i++) {
+    bool toggle = i % 2;
+
+    Serial.print("Set pint 8 and 9 to:");
+    Serial.print(toggle);
+    Serial.print(", ");
+    Serial.println(!toggle);
+    Serial.println();
+
+    // Set pin 8 and 9 level
+    expander->digitalWrite(8, toggle);
+    expander->digitalWrite(9, !toggle);
+    delay(1);
+
+    // Read pin 0 and 5 level
+    level[0] = expander->digitalRead(0);
+    level[1] = expander->digitalRead(5);
+
+    Serial.print("Read pin 0 and 5 level: ");
+    Serial.print(level[0]);
+    Serial.print(", ");
+    Serial.println(level[1]);
+    Serial.println();
+
+    delay(1000);
+  }
+}

examples/TestFunctions/TestFunctions.ino

@@ -12,6 +12,8 @@
 #define EXAMPLE_I2C_NUM         (0)
 #define EXAMPLE_I2C_SDA_PIN     (8)
 #define EXAMPLE_I2C_SCL_PIN     (18)
+#define EXAMPLE_I2C_ADDR        (ESP_IO_EXPANDER_I2C_TCA9554_ADDRESS_000)   // Modify this value according to the
+                                                                            // hardware address
 
 #define _EXAMPLE_CHIP_CLASS(name, ...)   ESP_IOExpander_##name(__VA_ARGS__)
 #define EXAMPLE_CHIP_CLASS(name, ...)    _EXAMPLE_CHIP_CLASS(name, ##__VA_ARGS__)
@@ -29,6 +31,12 @@ void setup()
     expander->init();
     expander->begin();
 
+    /* For CH422G */
+    // static_cast<ESP_IOExpander_CH422G *>(expander)->enableOC_PushPull();
+    // static_cast<ESP_IOExpander_CH422G *>(expander)->enableOC_OpenDrain();
+    // static_cast<ESP_IOExpander_CH422G *>(expander)->enableAllIO_Input();
+    // static_cast<ESP_IOExpander_CH422G *>(expander)->enableAllIO_Output();
+
     Serial.println("Original status:");
     expander->printStatus();
 

library.properties

@@ -1,6 +1,6 @@
 name=ESP32_IO_Expander
-version=0.0.3
-author=lzw655
+version=0.0.4
+author=espressif
 maintainer=espressif
 sentence=ESP32_IO_Expander is a library designed for driving IO expander chips using ESP32 SoCs
 paragraph=Currently support TCA95xx(8bit), TCA95xx(16bit), HT8574, CH422G