Add support for repositories in gitlab subgroups. (was: Add rhio-LIS2HH12 library)

[JoseMartiRhombio]

Hello,

rhomb.io have developed a LIS2HH12 library to run this accelerometer
Please, could you add the https://gitlab.com/rhombio/rhio-LIS2HH12 to the Library Manager?

Thanks

[cmaglie]

Done.

[JoseMartiRhombio]

Done.

Excuse me @cmaglie , I have needed to change the url, could you update the information with this url; https://gitlab.com/rhombio/rhio-libraries/rhio-LIS2HH12 ? The new version is v0.1.1

[cmaglie]

The "subgroups" feature of gitlab requires us to implement a special handling on our library indexer. I think this is a quite new feature of gitlab since until now we assumed that the path was always in the form: http://gitlab.com/USERNAME/REPOSITORY

BTW I see that gitlab redirects from the old URL to the new URL transparently so things should just work in your particular case.

About the missing v0.1.1, the problem is not the changed repo URL but the version written in library.properties:

https://gitlab.com/rhombio/rhio-libraries/rhio-LIS2HH12/-/blob/v0.1.1/library.properties

as you can see the file still has version=0.1.0. BTW on master I see 0.1.1 so I guess you pushed the tag before updating the version on master. To fix this just delete the tag 0.1.1 and redo it on master`

I'll keep this issue open until we add support for gitlab's "subgroutp" on the library indexer.

[JoseMartiRhombio]

Hello kbkibbe, I'm sorry for the delay, I haven't seen your message. You say something about CS but the library doesn't work with SPI bus. If you have this problem yet, you could send me your example code and I'll tell you more about this. Thanks for contact me

…

________________________________ De: kbkibbe <notifications@github.com> Enviado: miércoles, 9 de diciembre de 2020 22:54 Para: arduino/Arduino <Arduino@noreply.github.com> Cc: Jose Francisco Marti <jmarti@rhomb.io>; Author <author@noreply.github.com> Asunto: Re: [arduino/Arduino] Add support for repositories in gitlab subgroups. (was: Add rhio-LIS2HH12 library) (#10430) Hello Jose. I've been trying your library on a Sparkfun nRF52832 board. Using your simplest example I am unable to get data from the accel, I just get zeros. The setup of the LIS2HH12 is CS is high and SD0 is low. What I see on a logic analyzer is ONLY a setup write to 0x3A which gets a nak and the a setup read to 0x3B which also gets a NAK. This happens a bunch of times then a ~2 second delay. Any thoughts on where I am going wrong? I'm using ver 0.1.2. Thanks. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<https://github.com/arduino/Arduino/issues/10430#issuecomment-742086955>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AQCVULX5F5XKA6SQ77YATHTST7W2VANCNFSM4OJD6PMA>.