[GIGA Display Shield] Added delays to all sketches

content/hardware/10.mega/shields/giga-display-shield/tutorials/02.gfx-guide/gfx-guide.md

@@ -43,6 +43,7 @@ To use the library, we simply need to create a display object, initialize the li
 GigaDisplay_GFX display; // create the object
 
 void setup() {
+  delay(3000);
   display.begin(); //init library
 
   display.setCursor(10,10); //x,y
@@ -97,6 +98,7 @@ GigaDisplay_GFX display; // create the object
 #define BLACK 0x0000
 
 void setup() {
+  delay(3000);
   display.begin();
   display.fillScreen(BLACK);
   display.setCursor(10,10); //x,y
@@ -131,6 +133,7 @@ GigaDisplay_GFX display;
 #define BLACK 0x0000
 
 void setup() {
+  delay(3000);
   display.begin();
   display.fillScreen(WHITE);
   display.drawTriangle(100, 200, 300, 400, 300, 600, BLACK);
@@ -173,6 +176,7 @@ int counter;
 void setup() {
   // put your setup code here, to run once:
   Serial.begin(9600);
+  delay(3000);
   display.begin();
 
   if (touchDetector.begin()) {

content/hardware/10.mega/shields/giga-display-shield/tutorials/03.lvgl-guide/content.md

@@ -64,6 +64,7 @@ In the `setup()`, we begin by initializing the display and the touch detector.
 
 ```arduino
 void setup(){
+  delay(3000);
   Display.begin();
   TouchDetector.begin();
 }
@@ -154,6 +155,7 @@ Arduino_H7_Video Display(800, 480, GigaDisplayShield);
 Arduino_GigaDisplayTouch TouchDetector;
 
 void setup() {
+  delay(3000);
   Display.begin();
   TouchDetector.begin();
 
@@ -236,6 +238,7 @@ To make sure we see the image use the align function to make it centered. Then a
 Arduino_H7_Video          Display(800, 480, GigaDisplayShield);
 
 void setup() {
+  delay(3000);
   Display.begin();
 
   lv_obj_t * screen = lv_obj_create(lv_scr_act());
@@ -335,6 +338,7 @@ Arduino_H7_Video          Display(800, 480, GigaDisplayShield);
 Arduino_GigaDisplayTouch  TouchDetector;
 
 void setup() {
+  delay(3000);
   Display.begin();
   TouchDetector.begin();
 
@@ -410,6 +414,7 @@ Arduino_H7_Video          Display(800, 480, GigaDisplayShield);
 Arduino_GigaDisplayTouch  TouchDetector;
 
 void setup() {
+  delay(3000);
   Display.begin();
   TouchDetector.begin();
 
@@ -506,6 +511,7 @@ Arduino_H7_Video          Display(800, 480, GigaDisplayShield); /* Arduino_H7_Vi
 Arduino_GigaDisplayTouch  TouchDetector;
 
 void setup() {
+  delay(3000);
   Display.begin();
   TouchDetector.begin();
 
@@ -634,6 +640,7 @@ static void set_slider_val(void * bar, int32_t val) {
 }
 
 void setup() {
+  delay(3000);
   Display.begin();
   TouchDetector.begin();
 
@@ -752,6 +759,7 @@ static void btn_event_cb(lv_event_t * e) {
 }
 
 void setup() {
+  delay(3000);
   Display.begin();
   TouchDetector.begin();
 

content/hardware/10.mega/shields/giga-display-shield/tutorials/04.basic-draw-and-image/content.md

@@ -42,6 +42,7 @@ Let's first draw the background of the image. Start by initializing the display
 
 ```arduino
 void setup() {
+  delay(3000);
   Display.begin();
 
   Display.beginDraw();
@@ -97,6 +98,7 @@ Arduino_H7_Video Display(800, 480, GigaDisplayShield);
 //Arduino_H7_Video Display(1024, 768, USBCVideo);
 
 void setup() {
+  delay(3000);
   Display.begin();
 
   Display.beginDraw();
@@ -193,6 +195,7 @@ Arduino_H7_Video Display(800, 480, GigaDisplayShield);
 Image img_arduinologo(ENCODING_RGB16, (uint8_t *) texture_raw, 300, 300);
 
 void setup() {
+  delay(3000);
   Display.begin();
 
   Display.beginDraw();

content/hardware/10.mega/shields/giga-display-shield/tutorials/05.basic-touch/basic-touch.md

@@ -85,6 +85,7 @@ int lastTouch;
 int threshold = 250; //time in milliseconds
 
 void setup() {
+  delay(3000);
   Serial.begin(115200);
   while(!Serial) {}
 
@@ -147,6 +148,7 @@ int threshold = 250;
 bool switch_1;
 
 void setup() {
+  delay(3000);
   // put your setup code here, to run once:
   Serial.begin(9600);
   display.begin();

content/hardware/10.mega/shields/giga-display-shield/tutorials/06.image-orientation/content.md

@@ -40,6 +40,7 @@ LV_IMG_DECLARE(img_arduinologo);
 lv_obj_t * img;
 
 void setup() {
+  delay(3000);
   Serial.begin(115200);
 
   Display.begin();
@@ -91,6 +92,7 @@ The easiest way to tell what values you are getting depending on the orientation
 BoschSensorClass imu(Wire1);
 
 void setup(){
+  delay(3000);
   Serial.begin(115200);
   imu.begin();
 }
@@ -131,6 +133,7 @@ LV_IMG_DECLARE(img_arduinologo);
 lv_obj_t * img;
 
 void setup() {
+  delay(3000);
   Serial.begin(115200);
 
   Display.begin();

content/hardware/10.mega/shields/giga-display-shield/tutorials/07.microphone-tutorial/content.md

@@ -209,6 +209,7 @@ short sampleBuffer[512];
 volatile int samplesRead;
 
 void setup() {
+  delay(3000);
   Display.begin();
   Display.beginDraw();
   Display.background(255, 255, 255);
@@ -316,6 +317,7 @@ lv_anim_t a;
 int micValue;
 
 void setup() {
+  delay(3000);
   Display.begin();
 
   PDM.onReceive(onPDMdata);

content/hardware/10.mega/shields/giga-display-shield/tutorials/08.camera-tutorial/content.md

@@ -113,6 +113,7 @@ void blinkLED(uint32_t count = 0xFFFFFFFF)
 uint32_t palette[256];
 
 void setup() {
+  delay(3000);
   // Init the cam QVGA, 30FPS
   if (!cam.begin(CAMERA_R320x240, IMAGE_MODE, 30)) {
     blinkLED();

content/hardware/10.mega/shields/giga-display-shield/tutorials/10.square-line-tutorial/content.md

@@ -62,6 +62,7 @@ Arduino_H7_Video          Display(800, 480, GigaDisplayShield);
 Arduino_GigaDisplayTouch  Touch;
 
 void setup() {
+  delay(3000);
   Display.begin();
   Touch.begin();
 
@@ -119,6 +120,7 @@ Then it is as simple as using the names of the widgets in a LVGL function. For e
 
 ```arduino
 void setup() {
+    delay(3000);
     Display.begin();
     Touch.begin();
 
@@ -182,6 +184,7 @@ static void ButtonDec_evt_handler(lv_event_t * e) {
 }
 
 void setup() {
+    delay(3000);
     Display.begin();
     Touch.begin();
 

content/hardware/10.mega/shields/giga-display-shield/tutorials/12.emwin-guide/content.md

@@ -52,6 +52,7 @@ When creating elements, information about the screen and placement needs to be p
 
 ```arduino
 void setup() {
+  delay(3000);
   /* Init SEGGER emWin library. It also init display and touch controller */
   GUI_Init();
 
@@ -73,6 +74,7 @@ Here is an example that sets the screen background color to green and prints the
 #include <DIALOG.h>
 
 void setup() {
+  delay(3000);
   GUI_Init();
   GUI_MULTIBUF_Begin();
   GUI_SetBkColor(GUI_GREEN);
@@ -261,6 +263,7 @@ static void _cbWin(WM_MESSAGE * pMsg) {
 }
 
 void setup() {
+  delay(3000);
   GUI_Init();
   WM_MULTIBUF_Enable(1);
   WM_CreateWindowAsChild(0, 0, LCD_GetXSize(), LCD_GetYSize(), WM_HBKWIN, WM_CF_SHOW, _cbWin, 0);
@@ -358,6 +361,7 @@ static void _cbChildWinCheck(WM_MESSAGE * pMsg) {
 }
 
 void setup() {
+  delay(3000);
   /* Init SEGGER emWin library. It also init display and touch controller */
   GUI_Init();
 
@@ -469,6 +473,7 @@ static void _cbChildWinSlider(WM_MESSAGE * pMsg) {
 }
 
 void setup() {
+  delay(3000);
   /* Init SEGGER emWin library. It also init display and touch controller */
   GUI_Init();
 
@@ -608,6 +613,7 @@ int progbarCnt = 0;
 unsigned long previousMillis = 0;
 
 void setup() {
+  delay(3000);
   /* Init SEGGER emWin library. It also init display and touch controller */
   GUI_Init();
 
@@ -732,6 +738,7 @@ static void _cbChildWinBtn(WM_MESSAGE * pMsg) {
 }
 
 void setup() {
+  delay(3000);
   /* Init SEGGER emWin library. It also init display and touch controller */
   GUI_Init();