[PC-1604] Docs 2.0 + Content Fixes - Portenta related changes

content/hardware/04.pro/boards/portenta-c33/tutorials/user-manual/content.md

@@ -72,7 +72,7 @@ The **Arduino Renesas Boards** core contains the libraries and examples to work
 
 The complete pinout is available and downloadable as PDF from the link below:
 
-- [Portenta C33 pinout](https://docs.arduino.cc/static/903c16295f3bf076c2ed23eb1b38791c/ABX00074-full-pinout.pdf)
+- [Portenta C33 pinout](https://docs.arduino.cc/resources/pinouts/ABX00074-full-pinout.pdf)
 
 ### Datasheet
 

content/hardware/04.pro/boards/portenta-h7/tutorials/ble-connectivity/content.md

@@ -50,7 +50,7 @@ To communicate with the Portenta H7 via Bluetooth®, you need to upload a pre-bu
 
 ### 1. The Basic Setup
 
-Begin by plugging in your Portenta board to the computer using a USB-C® cable and open the Arduino IDE. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [set up the Portenta H7 for Arduino](setting-up-portenta) before you proceed.
+Begin by plugging in your Portenta board to the computer using a USB-C® cable and open the Arduino IDE. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [set up the Portenta H7 for Arduino](https://docs.arduino.cc/tutorials/portenta-h7/setting-up-portenta/) before you proceed.
 
 ![The Portenta H7 can be connected to the computer using an appropriate USB-C® cable](assets/por_ard_ble_basic_setup.svg)
 
@@ -184,18 +184,18 @@ On your mobile device install **nRF Connect** or an equivalent app that allows f
 
 Once you have downloaded the nRF application on your mobile device, look for your Portenta in the device list. You may filter the list by "Portenta" to easierly find your board in case you are using **nRF Connect**. 
 
-- When you found your board in the list tap "Connect". 
+- When you find your board in the list tap "Connect". 
 - Navigate to the "Services" screen and tap the arrow up button. 
 - Switch to "Bool" type and move the toggle to "True". Confirm the dialog with a tap on "Write" and you should see the built-in LED turned on. If you do the same procedure again but setting the toggle switch to "False", it will turn off the LED.
 
 ![In the nRF Connect app use a Bool toggle switch to toggle the built-in LED.](assets/por_ard_ble_nrf_connect.png)
 
 ## Conclusion
-This tutorial shows how to connect and control the built-in LED using a Bluetooth® Low Energy connection. You have learnt how a simple Bluetooth® Low Energy connection between your Portenta and your cell phone, which has basic communication abilities between the two devices, works.
+This tutorial shows how to connect and control the built-in LED using a Bluetooth® Low Energy connection. You have learned how a simple Bluetooth® Low Energy connection between your Portenta and your cell phone, which has basic communication abilities between the two devices, works.
 
 ### Next Steps
 
-Now that you learnt how to configure the Portenta as a Bluetooth® Low Energy endpoint, you can try with two Portentas (or other Bluetooth® Low Energy capable Arduino devices), to facilitate bidirectional communication. More information on how to achieve that can be found on the [BLE library reference page](https://www.arduino.cc/en/Reference/ArduinoBLE).
+Now that you learned how to configure the Portenta as a Bluetooth® Low Energy endpoint, you can try with two Portentas (or other Bluetooth® Low Energy capable Arduino devices), to facilitate bidirectional communication. More information on how to achieve that can be found on the [BLE library reference page](https://www.arduino.cc/en/Reference/ArduinoBLE).
 
 
 ## Troubleshooting

content/hardware/04.pro/boards/portenta-h7/tutorials/creating-gui-with-lvgl/content.md

@@ -54,7 +54,7 @@ This tutorial will guide you through building a basic user interface using the L
 
 ### 1. The Basic Setup
 
-Begin by plugging your Portenta board into the computer using a USB-C® cable and open the Arduino IDE. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [set up the Portenta H7 for Arduino](setting-up-portenta) before you proceed.
+Begin by plugging your Portenta board into the computer using a USB-C® cable and open the Arduino IDE. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [set up the Portenta H7 for Arduino](https://docs.arduino.cc/tutorials/portenta-h7/setting-up-portenta/) before you proceed.
 
 ![The Portenta H7 can be connected to the computer using an appropriate USB-C® cable](assets/por_ard_lvgl_basic_setup.svg)
 

content/hardware/04.pro/boards/portenta-h7/tutorials/dual-core-processing/content.md

@@ -31,7 +31,7 @@ The Portenta H7 is equipped with a processor that has two processing units calle
 
 ### Required Hardware and Software
 
-- [Portenta H7 (ABX00042)](https://store.arduino.cc/portenta-h7) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)
+- [Portenta H7 (ABX00042)](https://store.arduino.cc/portenta-h7), [Portenta H7 Lite (ABX00045)](https://store.arduino.cc/products/portenta-h7-lite) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)
 - USB-C® cable (either USB A to USB-C® or USB-C® to USB-C®)
 - Arduino IDE 1.8.10+ 
 
@@ -192,4 +192,4 @@ This tutorial introduces the idea of dual core processing and illustrates the co
 
 ### Next Steps
 
-- Proceed with the next tutorial [Setting Up a Wi-Fi Access Point](wifi-access-point) to learn how to make use of the built-in Wi-Fi module and configure your Portenta H7 as a Wi-Fi access point.
+- Proceed with the next tutorial [Setting Up a Wi-Fi Access Point](https://docs.arduino.cc/tutorials/portenta-h7/wifi-access-point/) to learn how to make use of the built-in Wi-Fi module and configure your Portenta H7 as a Wi-Fi access point.

content/hardware/04.pro/boards/portenta-h7/tutorials/flash-optimized-key-value-store/content.md

@@ -30,7 +30,7 @@ In this tutorial you will learn how to use the Mbed OS [TDBStore API](https://os
 
 - [Portenta H7 (ABX00042)](https://store.arduino.cc/products/portenta-h7),  [Portenta H7 Lite (ABX00045)](https://store.arduino.cc/products/portenta-h7-lite) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)
 - USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
-- Arduino IDE 1.8.10+ or Arduino Pro IDE 0.0.4+ or Arduino CLI 0.13.0+
+- [Arduino IDE 2.0+](https://www.arduino.cc/en/software) or [Arduino CLI 0.13.0+](https://www.arduino.cc/pro/software-pro-cli/)
 
 ## Instructions
 

content/hardware/04.pro/boards/portenta-h7/tutorials/getting-started-openmv-micropython/content.md

@@ -162,7 +162,7 @@ In this tutorial you learned how to use the OpenMV IDE with your Portenta board.
 ### Next Steps
 
 -   Experiment with MicroPythons capabilities. If you want some examples of what to do, take a look at the examples included in the OpenMV IDE. Go to: **File > Examples > Arduino > Portenta H7** in the OpenMV IDE.
--   Take a look at the other Portenta H7 tutorials which showcase its many uses. You can find them [here](https://docs.arduino.cc/hardware/portenta-h7#tutorials).
+-   Take a look at the other Portenta H7 tutorials which showcase its many uses. You can find them [here](https://docs.arduino.cc/hardware/portenta-h7/#tutorials).
 
 ## Troubleshooting
 

content/hardware/04.pro/boards/portenta-h7/tutorials/openmv-cheat-sheet/openmv-cheat-sheet.md

@@ -1,6 +1,7 @@
 ---
 title: 'Arduino Portenta H7 MicroPython Cheat Sheet'
 description: 'Learn how to set up the Arduino Portenta H7 for OpenMV. Obtain information regarding pins and how to use OpenMV and MicroPython.'
+difficulty: beginner
 tags:
   - Installation
   - MicroPython