Closed
Description
Bug Report
Current behavior
arduino-cli compile -b arduino:samd:mkrwan1310 ~/getdeveui/ -v --show-properties --format json
The produced output is not fully in json
_id=mkrwan1310
archive_file_path={build.path}/{archive_file}
arduinoota.extraflags=
bootloader.file=mkrwan1300/samd21_sam_ba_arduino_mkrwan1310.bin
bootloader.tool=openocd
bootloader.tool.default=openocd
build.arch=SAMD
build.board=SAMD_MKRWAN1310
build.core=arduino
build.core.path=/home/umberto/.arduino15/packages/arduino/hardware/samd/1.8.12/cores/arduino
build.extra_flags=-DUSE_ARDUINO_MKR_PIN_LAYOUT -D__SAMD21G18A__ {build.usb_flags} -DUSE_BQ24195L_PMIC -DVERY_LOW_POWER
build.f_cpu=48000000L
build.fqbn=arduino:samd:mkrwan1310
build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld
build.library_discovery_phase=0
build.mcu=cortex-m0plus
build.openocdscript=openocd_scripts/arduino_zero.cfg
build.path=/tmp/arduino-sketch-6631A0D1FB86504F68374499C713AA5D
build.pid=0x8059
build.preferred_out_format=bin
build.project_name=getdeveui.ino
build.source.path=/home/umberto/getdeveui
build.system.path=/home/umberto/.arduino15/packages/arduino/hardware/samd/1.8.12/system
build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'
build.usb_manufacturer="Arduino LLC"
build.usb_product="Arduino MKR WAN 1310"
build.variant=mkrwan1300
build.variant.path=/home/umberto/.arduino15/packages/arduino/hardware/samd/1.8.12/variants/mkrwan1300
build.vid=0x2341
build.warn_data_percentage=75
compiler.S.cmd=arm-none-eabi-gcc
compiler.S.extra_flags=
compiler.S.flags=-mcpu={build.mcu} -mthumb -c -g -x assembler-with-cpp -MMD
compiler.ar.cmd=arm-none-eabi-ar
compiler.ar.extra_flags=
compiler.ar.flags=rcs
compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-4.5.0.path}/CMSIS/Include/" "-I{runtime.tools.CMSIS-Atmel-1.2.0.path}/CMSIS/Device/ATMEL/"
compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-4.5.0.path}/CMSIS/Lib/GCC/" -larm_cortexM0l_math
compiler.c.cmd=arm-none-eabi-gcc
compiler.c.elf.cmd=arm-none-eabi-g++
compiler.c.elf.extra_flags=
compiler.c.elf.flags={compiler.optimization_flags} -Wl,--gc-sections -save-temps
compiler.c.extra_flags=
compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.optimization_flags} {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD
compiler.cpp.cmd=arm-none-eabi-g++
compiler.cpp.extra_flags=
compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.optimization_flags} {compiler.warning_flags} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD
compiler.define=-DARDUINO=
compiler.elf2hex.bin.flags=-O binary
compiler.elf2hex.cmd=arm-none-eabi-objcopy
compiler.elf2hex.extra_flags=
compiler.elf2hex.hex.flags=-O ihex -R .eeprom
compiler.ldflags=-mcpu={build.mcu} -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align
compiler.libraries.ldflags=
compiler.objcopy.cmd=arm-none-eabi-objcopy
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
compiler.optimization_flags=-Os
compiler.optimization_flags.debug=-Og -g3
compiler.optimization_flags.release=-Os
compiler.path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/
compiler.readelf.cmd=arm-none-eabi-readelf
compiler.size.cmd=arm-none-eabi-size
compiler.warning_flags=-w
compiler.warning_flags.all=-Wall -Wextra
compiler.warning_flags.default=
compiler.warning_flags.more=-Wall
compiler.warning_flags.none=-w
debug.executable={build.path}/{build.project_name}.elf
debug.server=openocd
debug.server.openocd.path={runtime.tools.openocd-0.10.0-arduino7.path}/bin/openocd
debug.server.openocd.script={runtime.platform.path}/variants/{build.variant}/{build.openocdscript}
debug.server.openocd.scripts_dir={runtime.tools.openocd-0.10.0-arduino7.path}/share/openocd/scripts/
debug.toolchain=gcc
debug.toolchain.path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/
debug.toolchain.prefix=arm-none-eabi-
extra.time.dst=0
extra.time.local=1642591768
extra.time.utc=1642588168
extra.time.zone=3600
ide_version=10607
name=Arduino MKR WAN 1310
pid.0=0x8059
pid.1=0x0059
pluggable_discovery.required.0=builtin:serial-discovery
pluggable_discovery.required.1=builtin:mdns-discovery
pluggable_monitor.required.serial=builtin:serial-monitor
preproc.macros.flags=-w -x c++ -E -CC
recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} "-I{build.core.path}/api/deprecated" "-I{build.core.path}/api/deprecated-avr-comp" {includes} "{source_file}" -o "{object_file}"
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} {compiler.libraries.ldflags} -Wl,--start-group {compiler.arm.cmsis.ldflags} -lm "{build.path}/{archive_file}" -Wl,--end-group
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} "-I{build.core.path}/api/deprecated" "-I{build.core.path}/api/deprecated-avr-comp" {includes} "{source_file}" -o "{object_file}"
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} "-I{build.core.path}/api/deprecated" "-I{build.core.path}/api/deprecated-avr-comp" {includes} "{source_file}" -o "{object_file}"
recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.bin.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
recipe.output.save_file={build.project_name}.{build.variant}.{build.preferred_out_format}
recipe.output.tmp_file={build.project_name}.{build.preferred_out_format}
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
recipe.size.regex=^(?:\.text|\.data|)\s+([0-9]+).*
recipe.size.regex.data=^(?:\.data|\.bss)\s+([0-9]+).*
runtime.hardware.path=/home/umberto/.arduino15/packages/arduino/hardware/samd
runtime.ide.path=/home/linuxbrew/.linuxbrew/Cellar/arduino-cli/0.20.2/bin
runtime.ide.version=10607
runtime.os=linux
runtime.platform.path=/home/umberto/.arduino15/packages/arduino/hardware/samd/1.8.12
runtime.tools.CMSIS-4.5.0.path=/home/umberto/.arduino15/packages/arduino/tools/CMSIS/4.5.0
runtime.tools.CMSIS-Atmel-1.2.0.path=/home/umberto/.arduino15/packages/arduino/tools/CMSIS-Atmel/1.2.0
runtime.tools.CMSIS-Atmel.path=/home/umberto/.arduino15/packages/arduino/tools/CMSIS-Atmel/1.2.0
runtime.tools.CMSIS.path=/home/umberto/.arduino15/packages/arduino/tools/CMSIS/4.5.0
runtime.tools.arduinoOTA-1.2.1.path=/home/umberto/.arduino15/packages/arduino/tools/arduinoOTA/1.2.1
runtime.tools.arduinoOTA-1.3.0.path=/home/umberto/.arduino15/packages/arduino/tools/arduinoOTA/1.3.0
runtime.tools.arduinoOTA.path=/home/umberto/.arduino15/packages/arduino/tools/arduinoOTA/1.2.1
runtime.tools.arm-none-eabi-gcc-7-2017q4.path=/home/umberto/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4
runtime.tools.arm-none-eabi-gcc.path=/home/umberto/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4
runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino5.path=/home/umberto/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5
runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=/home/umberto/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7
runtime.tools.avr-gcc.path=/home/umberto/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7
runtime.tools.avrdude-6.3.0-arduino17.path=/home/umberto/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17
runtime.tools.avrdude.path=/home/umberto/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17
runtime.tools.bossac-1.7.0-arduino3.path=/home/umberto/.arduino15/packages/arduino/tools/bossac/1.7.0-arduino3
runtime.tools.bossac-1.9.1-arduino2.path=/home/umberto/.arduino15/packages/arduino/tools/bossac/1.9.1-arduino2
runtime.tools.bossac.path=/home/umberto/.arduino15/packages/arduino/tools/bossac/1.7.0-arduino3
runtime.tools.ctags-5.8-arduino11.path=/home/umberto/.arduino15/packages/builtin/tools/ctags/5.8-arduino11
runtime.tools.ctags.path=/home/umberto/.arduino15/packages/builtin/tools/ctags/5.8-arduino11
runtime.tools.dfu-util-0.10.0-arduino1.path=/home/umberto/.arduino15/packages/arduino/tools/dfu-util/0.10.0-arduino1
runtime.tools.dfu-util.path=/home/umberto/.arduino15/packages/arduino/tools/dfu-util/0.10.0-arduino1
runtime.tools.mdns-discovery-0.9.2.path=/home/umberto/.arduino15/packages/builtin/tools/mdns-discovery/0.9.2
runtime.tools.mdns-discovery-1.0.2.path=/home/umberto/.arduino15/packages/builtin/tools/mdns-discovery/1.0.2
runtime.tools.mdns-discovery.path=/home/umberto/.arduino15/packages/builtin/tools/mdns-discovery/1.0.2
runtime.tools.mklittlefs-3.0.4-gcc10.3-1757bed.path=/home/umberto/.arduino15/packages/esp8266/tools/mklittlefs/3.0.4-gcc10.3-1757bed
runtime.tools.mklittlefs.path=/home/umberto/.arduino15/packages/esp8266/tools/mklittlefs/3.0.4-gcc10.3-1757bed
runtime.tools.mkspiffs-3.0.4-gcc10.3-1757bed.path=/home/umberto/.arduino15/packages/esp8266/tools/mkspiffs/3.0.4-gcc10.3-1757bed
runtime.tools.mkspiffs.path=/home/umberto/.arduino15/packages/esp8266/tools/mkspiffs/3.0.4-gcc10.3-1757bed
runtime.tools.openocd-0.10.0-arduino7.path=/home/umberto/.arduino15/packages/arduino/tools/openocd/0.10.0-arduino7
runtime.tools.openocd-0.11.0-arduino2.path=/home/umberto/.arduino15/packages/arduino/tools/openocd/0.11.0-arduino2
runtime.tools.openocd.path=/home/umberto/.arduino15/packages/arduino/tools/openocd/0.10.0-arduino7
runtime.tools.python3-3.7.2-post1.path=/home/umberto/.arduino15/packages/esp8266/tools/python3/3.7.2-post1
runtime.tools.python3.path=/home/umberto/.arduino15/packages/esp8266/tools/python3/3.7.2-post1
runtime.tools.rp2040tools-1.0.2.path=/home/umberto/.arduino15/packages/arduino/tools/rp2040tools/1.0.2
runtime.tools.rp2040tools.path=/home/umberto/.arduino15/packages/arduino/tools/rp2040tools/1.0.2
runtime.tools.serial-discovery-1.2.1.path=/home/umberto/.arduino15/packages/builtin/tools/serial-discovery/1.2.1
runtime.tools.serial-discovery-1.3.0-rc1.path=/home/umberto/.arduino15/packages/builtin/tools/serial-discovery/1.3.0-rc1
runtime.tools.serial-discovery-1.3.1.path=/home/umberto/.arduino15/packages/builtin/tools/serial-discovery/1.3.1
runtime.tools.serial-discovery.path=/home/umberto/.arduino15/packages/builtin/tools/serial-discovery/1.3.1
runtime.tools.serial-monitor-0.9.1.path=/home/umberto/.arduino15/packages/builtin/tools/serial-monitor/0.9.1
runtime.tools.serial-monitor.path=/home/umberto/.arduino15/packages/builtin/tools/serial-monitor/0.9.1
runtime.tools.xtensa-lx106-elf-gcc-3.0.4-gcc10.3-1757bed.path=/home/umberto/.arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/3.0.4-gcc10.3-1757bed
runtime.tools.xtensa-lx106-elf-gcc.path=/home/umberto/.arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/3.0.4-gcc10.3-1757bed
software=ARDUINO
tools.arduino-preprocessor.cmd.path={path}/arduino-preprocessor
tools.arduino-preprocessor.path={runtime.tools.arduino-preprocessor.path}
tools.arduino-preprocessor.pattern="{cmd.path}" "{source_file}" "{codecomplete}" -- -std=gnu++11
tools.arduino_ota.cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
tools.arduino_ota.upload.field.password=Password
tools.arduino_ota.upload.field.password.secret=true
tools.arduino_ota.upload.pattern="{cmd}" -address "{upload.port.address}" -port 65280 -username arduino -password "{upload.field.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b {arduinoota.extraflags}
tools.avrdude.cmd={path}/bin/avrdude
tools.avrdude.config.path={path}/etc/avrdude.conf
tools.avrdude.path={runtime.tools.avrdude.path}
tools.avrdude.upload.network_pattern="{tools.arduino_ota.cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
tools.avrdude.upload.params.noverify=-V
tools.avrdude.upload.params.quiet=-q -q
tools.avrdude.upload.params.verbose=-v -v
tools.avrdude.upload.pattern="{cmd}" "-C{config.path}" {upload.verbose} -p{build.emu.mcu} -c{upload.protocol} -P{serial.port} -b{upload.speed} "-Uflash:w:{build.path}/{build.project_name}.hex:i"
tools.avrdude_remote.upload.pattern="openocd --version 2>&1 | grep 2016 && if opkg update; then opkg upgrade openocd; exit 1; else echo 'Please connect your board to the Internet in order to upgrade tools' >&2; exit 1; fi || /usr/bin/run-avrdude /tmp/sketch.hex"
tools.bossac.cmd=bossac
tools.bossac.cmd.windows=bossac.exe
tools.bossac.path={runtime.tools.bossac-1.7.0-arduino3.path}
tools.bossac.upload.network_pattern="{tools.arduino_ota.cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b {arduinoota.extraflags}
tools.bossac.upload.params.quiet=
tools.bossac.upload.params.verbose=-i -d
tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -i -e -w -v "{build.path}/{build.project_name}.bin" -R
tools.bossacI.cmd=bossac
tools.bossacI.cmd.windows=bossac.exe
tools.bossacI.path={runtime.tools.bossac-1.7.0-arduino3.path}
tools.bossacI.upload.network_pattern="{tools.arduino_ota.cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
tools.bossacI.upload.params.quiet=
tools.bossacI.upload.params.verbose=-i -d
tools.bossacI.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -I -U {upload.native_usb} -i -e -w "{build.path}/{build.project_name}.bin" -R
tools.bossacI_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
tools.bossac_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
tools.ctags.cmd.path={path}/ctags
tools.ctags.path={runtime.tools.ctags.path}
tools.ctags.pattern="{cmd.path}" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "{source_file}"
tools.openocd-withbootsize.bootloader.params.quiet=-d0
tools.openocd-withbootsize.bootloader.params.verbose=-d2
tools.openocd-withbootsize.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
tools.openocd-withbootsize.cmd=bin/openocd
tools.openocd-withbootsize.cmd.windows=bin/openocd.exe
tools.openocd-withbootsize.erase.params.quiet=-d0
tools.openocd-withbootsize.erase.params.verbose=-d3
tools.openocd-withbootsize.erase.pattern=
tools.openocd-withbootsize.path={runtime.tools.openocd-0.10.0-arduino7.path}
tools.openocd-withbootsize.program.params.quiet=-d0
tools.openocd-withbootsize.program.params.verbose=-d2
tools.openocd-withbootsize.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
tools.openocd-withbootsize.upload.params.quiet=-d0
tools.openocd-withbootsize.upload.params.verbose=-d2
tools.openocd-withbootsize.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset {bootloader.size}; shutdown"
tools.openocd.bootloader.params.quiet=-d0
tools.openocd.bootloader.params.verbose=-d2
tools.openocd.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "interface/{protocol}" -c "set telnet_port 0" {extra_params} -f "target/at91samdXX.cfg" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
tools.openocd.cmd=bin/openocd
tools.openocd.cmd.windows=bin/openocd.exe
tools.openocd.erase.params.quiet=-d0
tools.openocd.erase.params.verbose=-d3
tools.openocd.erase.pattern=
tools.openocd.path={runtime.tools.openocd-0.10.0-arduino7.path}
tools.openocd.program.params.quiet=-d0
tools.openocd.program.params.verbose=-d2
tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "interface/{protocol}" -c "set telnet_port 0" {extra_params} -f "target/at91samdXX.cfg" -c "telnet_port disabled; program {{build.path}/{build.project_name}.hex} verify reset; shutdown"
tools.openocd.upload.network_pattern={tools.arduino_ota.cmd} -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
tools.openocd.upload.params.quiet=-d0
tools.openocd.upload.params.verbose=-d2
tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "interface/{protocol}" -c "set telnet_port 0" {extra_params} -f "target/at91samdXX.cfg" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown"
upload.maximum_data_size=32768
upload.maximum_size=262144
upload.native_usb=true
upload.protocol=sam-ba
upload.tool=bossac
upload.tool.default=bossac
upload.tool.network=arduino_ota
upload.use_1200bps_touch=true
upload.wait_for_upload_port=true
upload_port.0.pid=0x8059
upload_port.0.vid=0x2341
upload_port.1.pid=0x0059
upload_port.1.vid=0x2341
upload_port.2.board=mkrwan1310
version=1.8.12
vid.0=0x2341
vid.1=0x2341
{
"compiler_out": "Using board 'mkrwan1310' from platform in folder: /home/umberto/.arduino15/packages/arduino/hardware/samd/1.8.12\nUsing core 'arduino' from platform in folder: /home/umberto/.arduino15/packages/arduino/hardware/samd/1.8.12\n",
"compiler_err": "",
"builder_result": {
"build_path": "/tmp/arduino-sketch-6631A0D1FB86504F68374499C713AA5D"
},
"success": true
}Expected behavior
the output should be in json
Arduino CLI version
Original report
0.20.0
Last verified with
Operating system
- Linux
- Windows
Operating system version
- Ubuntu 18.04
- Windows 11