bootstrap.sh: limit Zephyr HALs by default

[pillo79]

This reworks the current west.yml and bootstrap.sh so that only the HALs used by the Arduino core are installed by default.

Since those not named in the allowlist are discarded during the Zephyr import, it is impossible to allow the option to install every HAL that way. Instead, allow all HALs by path, then filter them by group using the manifest.project-filter config that is automatically set by bootstrap.sh. This allows to enable all HALs, if needed, by simply removing the filter.

[pillo79]

@KurtE @mjs513 this includes a change at boostrap.sh time, so your current workspaces do not have this filter enabled and have "many" hals (a lot more than were required). You have 2 options:

• do a clean reinstall and enjoy the minimal set of HALs (less disk space, faster west update)

or, to convert an existing workspace:

• remove everything from the modules/hal top-level folder in the workspace;
• run from ArduinoCore-zephyr:

  . venv/bin/update
  west config manifest.project-filter -- "-hal_.*,+hal_nordic,+hal_nxp,+hal_stm32,+hal_renesas"
  west update
  west blobs fetch hal_nxp
  

[KurtE]

@pillo79 - On my windows machine (in WSL), I think I did your 2nd option and then did a ./extra/build_all.sh

And it failed on:

-- Found assembler: /home/kurte/Downloads/zephyr-sdk-0.16.8/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc
-- Looking for device RW612 in /home/kurte/git/modules/hal/nxp/mcux/mcux-sdk-ng/devices/
-- Found device folder: /home/kurte/git/modules/hal/nxp/mcux/mcux-sdk-ng/devices/Wireless/RW/RW612
CMake Error at /home/kurte/git/modules/hal/nxp/zephyr/src/rw61x/CMakeLists.txt:39 (message):
  Couldn't find signed firmware !
  /home/kurte/git/modules/hal/nxp/zephyr/blobs/rw61x/rw61x_sb_wifi_a2.bin


-- Configuring incomplete, errors occurred!
FATAL ERROR: command exited with status 1: /usr/bin/cmake -DWEST_PYTHON=/home/kurte/git/ArduinoCore-zephyr/venv/bin/python3 -B/home/kurte/git/ArduinoCore-zephyr/build/frdm_rw612_rw612 -GNinja -DBOARD=frdm_rw612 -S/home/kurte/git/ArduinoCore-zephyr/loader

frdm_rw612_rw612 result: 1

[pillo79]

🤦‍♂️ my bad, sorry, forgot one bit on the above instructions - west blobs fetch hal_nxp. I've amended them now.
The change was really to avoid all these manual steps in the future 🙂

[mjs513]

@pillo79

Just did a clean install (should include @facchinm latest changes). Interesting install process now with the modules fpr example:

=== updating tinycrypt (modules/crypto/tinycrypt):
--- tinycrypt: initializing
Initialized empty Git repository in /home/my_new_zephyr_folder/modules/crypto/tinycrypt/.git/
--- tinycrypt: fetching, need revision 1012a3ebee18c15ede5efc8332ee2fc37817670f
remote: Enumerating objects: 51, done.
remote: Counting objects: 100% (51/51), done.
remote: Compressing objects: 100% (32/32), done.
remote: Total 51 (delta 15), reused 49 (delta 14), pack-reused 0 (from 0)
Unpacking objects: 100% (51/51), 67.28 KiB | 3.96 MiB/s, done.
From https://github.com/zephyrproject-rtos/tinycrypt
 * [new branch]      master     -> refs/west/master
HEAD is now at 1012a3e Fix warnings reported by UBSAN
HEAD is now at 1012a3e Fix warnings reported by UBSAN
Zephyr (/home/my_new_zephyr_folder/zephyr/share/zephyr-package/cmake)
has been added to the user package registry in:
~/.cmake/packages/Zephyr

ZephyrUnittest (/home/my_new_zephyr_folder/zephyr/share/zephyrunittest-package/cmake)
has been added to the user package registry in:
~/.cmake/packages/ZephyrUnittest

I am running WSL on a Win 11 machine and I tend to run into issues when building - like board failing to compile on first try but then builds on second - so probably an issue with WSL.

Anyways - build_all failed for the giga but when I built again using just build,sh giga built no issue.

doing a build_all again giga built but failed on building OPTA. This is really more of an FYI