I2C adress wrong

[bib85]

The I2C address of the touch controller is 0x14. However, the address 0x5D is set for the Arduino Giga.
After making the change, the connection is now initialized, but unfortunately there is no response to the coordinates.

[facchinm]

The "moving" address is very likely caused by not perfectly following the chip guidance
https://github.com/arduino-libraries/Arduino_GigaDisplayTouch/blob/main/src/Arduino_GigaDisplayTouch.cpp#L62-L65

@leonardocavagnis can you take a look and check if the code can be modified with the timings from the datasheet?

edit: everything looks fine following the code on the other lines. @bib85 do you have anything else connected to the Giga?

[leonardocavagnis]

Hi @bib85,
Are you using the GT911_I2C_ADDR_28_29 define for address 0x14?

Arduino_GigaDisplayTouch/src/Arduino_GigaDisplayTouch.h

Line 39 in 3e519d3

#define GT911_I2C_ADDR_28_29 (0x14 | 0x80) // 0x28/0x29 - 0x14 (7bit address)