Adding HMAC and nonce functionality for ATECC608

examples/ECCX08HMAC/ECCX08HMAC.ino

@@ -0,0 +1,78 @@
+/*
+    ECCX08 HMAC functionality example
+
+    This sketch uses the ECC608 to generate an hmac on some data.
+    Stores key using nonce.
+
+    Tested on the Arduino Nano RP2040.
+
+    created 10 October 2022
+    by Raul Leclair
+*/
+
+#include <ArduinoECCX08.h>
+
+#define TEMPKEY_SLOT 0xFFFF
+
+byte nonceKey[] = {
+    0x10, 0x10, 0x10, 0x10
+};
+
+byte data[] = {
+    0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+    0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+    0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+    0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+    0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+    0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+    0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+    0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+    0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
+};
+
+int dataLength = sizeof(data);
+
+void setup() {
+    Serial.begin(115200);
+    while (!Serial);
+
+    if (!ECCX08.begin()) {
+        Serial.println("Failed to initialize ECCX08 board.");
+        while (1);
+    }
+
+    // Perform nonce
+    if (!ECCX08.nonce(nonceKey))
+    {
+        Serial.println("Failed to perform nonce.");
+        while (1);
+    }
+
+    // Starting HMAC operation on tempkey slot
+    if (!ECCX08.beginHMAC(TEMPKEY_SLOT)) {
+        Serial.println("Failed to start HMAC operation.");
+        while (1);
+    }
+
+    if (!ECCX08.updateHMAC(data, dataLength)) {
+        Serial.println("Failed to update HMAC operation.");
+        while (1);
+    }
+
+    byte resultHMAC[32];
+    if (!ECCX08.endHMAC(resultHMAC)) {
+        Serial.println("Failed to end HMAC operation");
+        while (1);
+    }
+
+    Serial.println("HMAC Result: ");
+    for (int i = 0; i < sizeof(resultHMAC); i++) {
+        char hexChar[2];
+        sprintf(hexChar, "%02X", resultHMAC[i]);
+        Serial.print(hexChar);
+        Serial.print(" ");
+    }
+}
+
+void loop() {
+}

src/ECCX08.cpp

@@ -440,6 +440,114 @@ int ECCX08Class::lock()
   return 1;
 }
 
+
+int ECCX08Class::beginHMAC(uint16_t keySlot)
+{
+  // HMAC implementation is only for ATECC608
+  uint8_t status;
+  long ecc608ver = 0x0600000;
+  long eccCurrVer = version() & 0x0F00000;
+
+  if (eccCurrVer != ecc608ver) {
+    return 0;
+  }
+
+  if (!wakeup()) {
+    return 0;
+  }
+
+  if (!sendCommand(0x47, 0x04, keySlot)) {
+    return 0;
+  }
+
+  delay(9);
+
+  if (!receiveResponse(&status, sizeof(status))) {
+    return 0;
+  }
+
+  delay(1);
+  idle();
+
+  if (status != 0) {
+    return 0;
+  }
+
+  return 1;
+}
+
+int ECCX08Class::updateHMAC(const byte data[], int length) {
+  uint8_t status;
+
+  if (!wakeup()) {
+    return 0;
+  }
+
+  // Processing message
+  int currLength = 0;
+  while (length) {
+    data += currLength;
+
+    if (length > 64) {
+      currLength = 64;
+    } else {
+      currLength = length;
+    }
+    length -= currLength;
+
+    if (!sendCommand(0x47, 0x01, currLength, data, currLength)) {
+      return 0;
+    }
+
+    delay(9);
+
+    if (!receiveResponse(&status, sizeof(status))) {
+      return 0;
+    }
+
+    delay(1);
+  }
+  idle();
+
+  if (status != 0) {
+    return 0;
+  }
+
+  return 1;
+}
+
+int ECCX08Class::endHMAC(byte result[])
+{
+  return endHMAC(NULL, 0, result);
+}
+
+int ECCX08Class::endHMAC(const byte data[], int length, byte result[])
+{
+  if (!wakeup()) {
+    return 0;
+  }
+
+  if (!sendCommand(0x47, 0x02, length, data, length)) {
+    return 0;
+  }
+
+  delay(9);
+
+  if (!receiveResponse(result, 32)) {
+    return 0;
+  }
+
+  delay(1);
+  idle();
+
+  return 1;
+}
+
+int ECCX08Class::nonce(const byte data[])
+{
+  return challenge(data);
+}
+
 int ECCX08Class::wakeup()
 {
   _wire->setClock(_wakeupFrequency);

src/ECCX08.h

@@ -59,6 +59,13 @@ class ECCX08Class
   int readConfiguration(byte data[]);
   int lock();
 
+  int beginHMAC(uint16_t keySlot);
+  int updateHMAC(const byte data[], int length);
+  int endHMAC(byte result[]);
+  int endHMAC(const byte data[], int length, byte result[]);
+
+  int nonce(const byte data[]);
+
 private:
   int wakeup();
   int sleep();