Support for 64x48 OLED ?

[erkobg]

Hello,
It will be very helpful if you add support for 64x48 OLED like the official display for Wemos 👍 http://www.wemos.cc/Products/oled_shield.html

Here they did almost the same :
https://github.com/mcauser/Adafruit_SSD1306/tree/esp8266-64x48

Regards!

[Testato]

+1

64x48 pixel is a very common display, have you plan for support it ?

[FWeinb]

I would like to support it but I don't have one yet so I can't start working on that.

[hallard]

I ordered some last week, as soon as I got them I may take a look and do a PR.
@FWeinb is there any tip should I know for being able to change resolution on library, such like current 128x64 resolution hard coded somewhere? may I just change then and OLED init code ?

[FWeinb]

To get this working you need to change the defines here and introduce a custom constructor/subclass of each driver to allow for selection of the width/height. Than you need to introduce local member variables to contain the width/height in the OLEDDisplay class and change every access to the defines to use these new local variables.

[LimaLima]

Being a lazy bastard, I took this lib and instead of adding support for different display, I just made it work with 128x32.
Then to be a complete *hole, I took the latest version, dropped changed files over it instead of merging.
But it might be still a useful starting point for your own changes - feel free to see diff and find what's needed to make other geometries work.

[trepidacious]

I've submitted a pull request #97 for changes to allow use of either 128x64 or 128x32 displays based on LimaLima's changes (thanks for working out the register values, I don't know what they do, but they work for me!)

[artkeller]

@FWeinb: to understand the tiny 64x48 display a bit better, refer to the following stuff

// cf. https://www.wemos.cc/product/oled-shield.html
// cf. https://macsbug.files.wordpress.com/2016/04/zahyou_s.png?w=700
// cf. https://macsbug.wordpress.com/2016/04/01/using-the-wemos-i2c-oled-64x48/

Sorry - the last link goes to a japanese site, but it can be understood pretty good due to the well documented code examples in english, good links and nice pictures... (I like this stuff)

BTW: Thanks for the New Year stuff :-)

Thomas

[tofrnr]

I fixed that issue for a OLED 64x48:

HTH!

/*
 * for OLED 64x48:
 * x-offset=32
 * y-offset=16
 * 
 * exchange  in OLEDDisplay.h:
 * 
   //#define DISPLAY_WIDTH 128
   //#define DISPLAY_HEIGHT 64
   
   #define DISPLAY_WIDTH 96
   #define DISPLAY_HEIGHT 64
 *  
*/

/**
 * The MIT License (MIT)
 *
 * Copyright (c) 2016 by Daniel Eichhorn
 * https://github.com/ThingPulse/esp8266-oled-ssd1306/issues ;
 *
 */

/*
 * for OLED 64x48:
 * x-offset=32
 * y-offset=16
 * 
 * exchange  in OLEDDisplay.h:
 * 
   //#define DISPLAY_WIDTH 128
   //#define DISPLAY_HEIGHT 64
   
   #define DISPLAY_WIDTH 96
   #define DISPLAY_HEIGHT 64
 *  
*/


// Include the correct displayBRK library
// For a connection via I2C using Wire include
#include <Wire.h>    // Only needed for Arduino 1.6.5 and earlier
#include "SSD1306.h" // alias for `#include "SSD1306Wire.h"`by Squix aka  Daniel Eichhorn



// Initialize the OLED displayBRK using Wire library
SSD1306  displayBRK(0x3d, D2, D1);




int counter = 1;

void setup() {
  Serial.begin(115200);
  Serial.println();
  Serial.println();

  Wire.begin();
  Wire.pins(D2,D1);

  // Initialising the UI will init the displayBRK too.
  displayBRK.init();

  displayBRK.flipScreenVertically();
  displayBRK.setFont(ArialMT_Plain_10);

}



void drawFontFaceDemo() {
    // Font Demo1
    // create more fonts at http://oleddisplayBRK.squix.ch/
    displayBRK.setTextAlignment(TEXT_ALIGN_LEFT);
    displayBRK.setFont(ArialMT_Plain_10);
    displayBRK.drawString(0+32, 0+16, "Hello world");
    displayBRK.setFont(ArialMT_Plain_16);
    displayBRK.drawString(0+32, 10+16, "Hello world");
    
    //displayBRK.setFont(ArialMT_Plain_24);
    //displayBRK.drawString(0, 26, "Hello world");
}

void drawTextFlowDemo() {
    displayBRK.setFont(ArialMT_Plain_10);
    displayBRK.setTextAlignment(TEXT_ALIGN_LEFT);
    displayBRK.drawStringMaxWidth(0+32, 0+16, 64,
    "Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore." );
}

void drawTextAlignmentDemo() {
    // Text alignment demo
  displayBRK.setFont(ArialMT_Plain_10);

  // The coordinates define the left starting point of the text
  displayBRK.setTextAlignment(TEXT_ALIGN_LEFT);
  displayBRK.drawString(0+32, 10+16, "Left aligned");

  // The coordinates define the center of the text
  displayBRK.setTextAlignment(TEXT_ALIGN_CENTER);
  displayBRK.drawString(32+32, 22+16, "Center aligned");

  // The coordinates define the right end of the text
  displayBRK.setTextAlignment(TEXT_ALIGN_RIGHT);
  displayBRK.drawString(64+32, 33+16, "Right aligned");

}

void drawCircleDemo() {
  for (int i=1; i < 8; i++) {
    displayBRK.setColor(WHITE);
    displayBRK.drawCircle(32+32, 24+16, i*3);
    if (i % 2 == 0) {
      displayBRK.setColor(BLACK);
    }
    displayBRK.fillCircle(32+32, 24+16, 32 - i* 3);
  }
}


void loop() {
  //------------------------------------
  // clear the displayBRK
  displayBRK.clear();
  drawFontFaceDemo();
  
  displayBRK.setTextAlignment(TEXT_ALIGN_LEFT);
  displayBRK.drawString(0+32, 32+16, String(millis()));
  
  displayBRK.display();

  delay(1000);

  //------------------------------------
  displayBRK.clear();
  drawTextFlowDemo();
  
  displayBRK.display();

  delay(1000);


  //------------------------------------
  displayBRK.clear();
  drawTextAlignmentDemo();

  displayBRK.display();

  delay(1000);


 
  //------------------------------------ 
  displayBRK.clear();
  drawCircleDemo();

  displayBRK.display();
  
  counter++;
  delay(1000);
}

[stale]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

[Testato]

PR #198 solve this Issue.
Please accept it

[stale]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.