Merge pull request #5 from esp8266/2.7.3

2.7.3

Author: Jason2866

README.md

@@ -3,7 +3,7 @@ Arduino core for ESP8266 WiFi chip
 
 # Quick links
 
-- [Latest release documentation](https://arduino-esp8266.readthedocs.io/en/2.7.1/)
+- [Latest release documentation](https://arduino-esp8266.readthedocs.io/en/2.7.3/)
 - [Current "git version" documentation](https://arduino-esp8266.readthedocs.io/en/latest/)
 - [Install git version](https://arduino-esp8266.readthedocs.io/en/latest/installing.html#using-git-version) ([sources](doc/installing.rst#using-git-version))
 
@@ -36,7 +36,7 @@ Starting with 1.6.4, Arduino allows installation of third-party platform package
 #### Latest release [![Latest release](https://img.shields.io/github/release/esp8266/Arduino.svg)](https://github.com/esp8266/Arduino/releases/latest/)
 Boards manager link: `https://arduino.esp8266.com/stable/package_esp8266com_index.json`
 
-Documentation: [https://arduino-esp8266.readthedocs.io/en/2.7.1/](https://arduino-esp8266.readthedocs.io/en/2.7.1/)
+Documentation: [https://arduino-esp8266.readthedocs.io/en/2.7.3/](https://arduino-esp8266.readthedocs.io/en/2.7.3/)
 
 ### Using git version
 [![Linux build status](https://travis-ci.org/esp8266/Arduino.svg)](https://travis-ci.org/esp8266/Arduino)

boards.txt

@@ -5458,9 +5458,76 @@ gen4iod.menu.ssl.all.build.sslflags=
 gen4iod.menu.ssl.basic=Basic SSL ciphers (lower ROM use)
 gen4iod.menu.ssl.basic.build.sslflags=-DBEARSSL_SSL_BASIC
 gen4iod.upload.resetmethod=--before default_reset --after hard_reset
-gen4iod.build.flash_mode=dio
-gen4iod.build.flash_flags=-DFLASHMODE_DIO
+gen4iod.menu.FlashMode.dout=DOUT (compatible)
+gen4iod.menu.FlashMode.dout.build.flash_mode=dout
+gen4iod.menu.FlashMode.dout.build.flash_flags=-DFLASHMODE_DOUT
+gen4iod.menu.FlashMode.dio=DIO
+gen4iod.menu.FlashMode.dio.build.flash_mode=dio
+gen4iod.menu.FlashMode.dio.build.flash_flags=-DFLASHMODE_DIO
+gen4iod.menu.FlashMode.qout=QOUT
+gen4iod.menu.FlashMode.qout.build.flash_mode=qout
+gen4iod.menu.FlashMode.qout.build.flash_flags=-DFLASHMODE_QOUT
+gen4iod.menu.FlashMode.qio=QIO (fast)
+gen4iod.menu.FlashMode.qio.build.flash_mode=qio
+gen4iod.menu.FlashMode.qio.build.flash_flags=-DFLASHMODE_QIO
 gen4iod.build.flash_freq=80
+gen4iod.menu.eesz.2M64=2MB (FS:64KB OTA:~992KB)
+gen4iod.menu.eesz.2M64.build.flash_size=2M
+gen4iod.menu.eesz.2M64.build.flash_size_bytes=0x200000
+gen4iod.menu.eesz.2M64.build.flash_ld=eagle.flash.2m64.ld
+gen4iod.menu.eesz.2M64.build.spiffs_pagesize=256
+gen4iod.menu.eesz.2M64.upload.maximum_size=1044464
+gen4iod.menu.eesz.2M64.build.rfcal_addr=0x1FC000
+gen4iod.menu.eesz.2M64.build.spiffs_start=0x1F0000
+gen4iod.menu.eesz.2M64.build.spiffs_end=0x1FB000
+gen4iod.menu.eesz.2M64.build.spiffs_blocksize=4096
+gen4iod.menu.eesz.2M128=2MB (FS:128KB OTA:~960KB)
+gen4iod.menu.eesz.2M128.build.flash_size=2M
+gen4iod.menu.eesz.2M128.build.flash_size_bytes=0x200000
+gen4iod.menu.eesz.2M128.build.flash_ld=eagle.flash.2m128.ld
+gen4iod.menu.eesz.2M128.build.spiffs_pagesize=256
+gen4iod.menu.eesz.2M128.upload.maximum_size=1044464
+gen4iod.menu.eesz.2M128.build.rfcal_addr=0x1FC000
+gen4iod.menu.eesz.2M128.build.spiffs_start=0x1E0000
+gen4iod.menu.eesz.2M128.build.spiffs_end=0x1FB000
+gen4iod.menu.eesz.2M128.build.spiffs_blocksize=4096
+gen4iod.menu.eesz.2M256=2MB (FS:256KB OTA:~896KB)
+gen4iod.menu.eesz.2M256.build.flash_size=2M
+gen4iod.menu.eesz.2M256.build.flash_size_bytes=0x200000
+gen4iod.menu.eesz.2M256.build.flash_ld=eagle.flash.2m256.ld
+gen4iod.menu.eesz.2M256.build.spiffs_pagesize=256
+gen4iod.menu.eesz.2M256.upload.maximum_size=1044464
+gen4iod.menu.eesz.2M256.build.rfcal_addr=0x1FC000
+gen4iod.menu.eesz.2M256.build.spiffs_start=0x1C0000
+gen4iod.menu.eesz.2M256.build.spiffs_end=0x1FB000
+gen4iod.menu.eesz.2M256.build.spiffs_blocksize=4096
+gen4iod.menu.eesz.2M512=2MB (FS:512KB OTA:~768KB)
+gen4iod.menu.eesz.2M512.build.flash_size=2M
+gen4iod.menu.eesz.2M512.build.flash_size_bytes=0x200000
+gen4iod.menu.eesz.2M512.build.flash_ld=eagle.flash.2m512.ld
+gen4iod.menu.eesz.2M512.build.spiffs_pagesize=256
+gen4iod.menu.eesz.2M512.upload.maximum_size=1044464
+gen4iod.menu.eesz.2M512.build.rfcal_addr=0x1FC000
+gen4iod.menu.eesz.2M512.build.spiffs_start=0x180000
+gen4iod.menu.eesz.2M512.build.spiffs_end=0x1FA000
+gen4iod.menu.eesz.2M512.build.spiffs_blocksize=8192
+gen4iod.menu.eesz.2M1M=2MB (FS:1MB OTA:~512KB)
+gen4iod.menu.eesz.2M1M.build.flash_size=2M
+gen4iod.menu.eesz.2M1M.build.flash_size_bytes=0x200000
+gen4iod.menu.eesz.2M1M.build.flash_ld=eagle.flash.2m1m.ld
+gen4iod.menu.eesz.2M1M.build.spiffs_pagesize=256
+gen4iod.menu.eesz.2M1M.upload.maximum_size=1044464
+gen4iod.menu.eesz.2M1M.build.rfcal_addr=0x1FC000
+gen4iod.menu.eesz.2M1M.build.spiffs_start=0x100000
+gen4iod.menu.eesz.2M1M.build.spiffs_end=0x1FA000
+gen4iod.menu.eesz.2M1M.build.spiffs_blocksize=8192
+gen4iod.menu.eesz.2M=2MB (FS:none OTA:~1019KB)
+gen4iod.menu.eesz.2M.build.flash_size=2M
+gen4iod.menu.eesz.2M.build.flash_size_bytes=0x200000
+gen4iod.menu.eesz.2M.build.flash_ld=eagle.flash.2m.ld
+gen4iod.menu.eesz.2M.build.spiffs_pagesize=256
+gen4iod.menu.eesz.2M.upload.maximum_size=1044464
+gen4iod.menu.eesz.2M.build.rfcal_addr=0x1FC000
 gen4iod.menu.eesz.512K32=512KB (FS:32KB OTA:~230KB)
 gen4iod.menu.eesz.512K32.build.flash_size=512K
 gen4iod.menu.eesz.512K32.build.flash_size_bytes=0x80000

bootloaders/eboot/eboot.c

@@ -230,15 +230,17 @@ int main()
 
         ets_putc('0'+res); ets_putc('\n');
 
+/** disabled in 2.7.3
         // Verify the copy
         ets_putc('c'); ets_putc('m'); ets_putc('p'); ets_putc(':');
         if (res == 0) {
             ets_wdt_disable();
             res = copy_raw(cmd.args[0], cmd.args[1], cmd.args[2], true);
             ets_wdt_enable();
             }
-
         ets_putc('0'+res); ets_putc('\n');
+**/
+
         if (res == 0) {
             cmd.action = ACTION_LOAD_APP;
             cmd.args[0] = cmd.args[1];

bootloaders/eboot/eboot.elf

@@ -1,7 +1,7 @@
 
 // autogenerated from https://raw.githubusercontent.com/nayarsystems/posix_tz_db/master/zones.csv
 // by script <esp8266 arduino core>/tools/TZupdate.sh
-// Thu May  7 19:02:21 UTC 2020
+// Tue Jul  7 07:38:29 UTC 2020
 //
 // This database is autogenerated from IANA timezone database
 //    https://www.iana.org/time-zones
@@ -105,7 +105,7 @@
 #define TZ_America_Cuiaba	PSTR("<-04>4")
 #define TZ_America_Curacao	PSTR("AST4")
 #define TZ_America_Danmarkshavn	PSTR("GMT0")
-#define TZ_America_Dawson	PSTR("PST8PDT,M3.2.0,M11.1.0")
+#define TZ_America_Dawson	PSTR("MST7")
 #define TZ_America_Dawson_Creek	PSTR("MST7")
 #define TZ_America_Denver	PSTR("MST7MDT,M3.2.0,M11.1.0")
 #define TZ_America_Detroit	PSTR("EST5EDT,M3.2.0,M11.1.0")
@@ -207,7 +207,7 @@
 #define TZ_America_Toronto	PSTR("EST5EDT,M3.2.0,M11.1.0")
 #define TZ_America_Tortola	PSTR("AST4")
 #define TZ_America_Vancouver	PSTR("PST8PDT,M3.2.0,M11.1.0")
-#define TZ_America_Whitehorse	PSTR("PST8PDT,M3.2.0,M11.1.0")
+#define TZ_America_Whitehorse	PSTR("MST7")
 #define TZ_America_Winnipeg	PSTR("CST6CDT,M3.2.0,M11.1.0")
 #define TZ_America_Yakutat	PSTR("AKST9AKDT,M3.2.0,M11.1.0")
 #define TZ_America_Yellowknife	PSTR("MST7MDT,M3.2.0,M11.1.0")

cores/esp8266/TZ.h

@@ -413,7 +413,7 @@ Datasheet and associated downloads can be found on the 4D Systems product page.
 
 The gen4-IoD range can be programmed using the Arduino IDE and also the 4D Systems Workshop4 IDE, which incorporates many additional graphics benefits. GFX4d library is available, along with a number of demo applications.
 
-- Product page: http://www.4dsystems.com.au/product/gen4-IoD
+- Product page: https://4dsystems.com.au/products/iot-display-modules
 
 Digistump Oak
 -------------

doc/boards.rst

@@ -54,12 +54,18 @@ mode
 .. code:: cpp
 
     WiFi.mode(m)
-    WiFi.getMode()
 
 -  ``WiFi.mode(m)``: set mode to ``WIFI_AP``, ``WIFI_STA``,
    ``WIFI_AP_STA`` or ``WIFI_OFF``
--  ``WiFi.getMode()``: return current Wi-Fi mode (one out of four modes
-   above)
+
+getMode
+~~~~~~~
+
+.. code:: cpp
+
+    WiFiMode_t WiFi.getMode()
+
+-  ``WiFi.getMode()``: return current Wi-Fi mode (one out of four modes above)
 
 WiFi power management, DTIM
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -95,17 +101,56 @@ periodic beacon at a frequency specified by the DTIM Interval.  Beacons are
 packets sent by an access point to synchronize a wireless network.
 
 
+setOutputPower
+~~~~~~~~~~~~~~
+
+.. code:: cpp
+
+    void WiFi.setOutputPower(float dBm)
+
+Sets the max transmit power, in dBm. Values range from 0 to 20.5 [dBm] inclusive, and should be multiples of 0.25.
+This is essentially a thin wrapper around the SDK's system_phy_set_max_tpw() api call.
+
+If wifi connection issues are encountered due to signal noise, one thing to try is to reduce the Tx power.
+This has been found effective in cases where STA mode is in use with 802.11n phy (default). Reducing to
+e.g.: 17.5dBm or slightly lower can reduce noise and improve connectivity, although max range will also be reduced.
+
+setPhyMode
+~~~~~~~~~~
+
+.. code:: cpp
+
+    bool  setPhyMode (WiFiPhyMode_t mode)
+
+Sets the WiFi radio phy mode. Argument is an enum of type WiFiPhyMode_t, valid values are:
+-  ``WIFI_PHY_MODE_11B``: 802.11b mode
+-  ``WIFI_PHY_MODE_11G``: 802.11g mode
+-  ``WIFI_PHY_MODE_11N``: 802.11n mode
+
+Per the NONOS SDK API Reference document, the AP mode only supports b/g, see notes in section on wifi_set_phy_mode() api.
+Returns true success, false otherwise.
+
+Some experiments have shown that 802.11b mode has longest LOS range, while 802.11n mode has longest indoor range.
+
+It has been observed that some wifi routers may degrade from 802.11n to g/b if an ESP8266 in g/b phy mode connects to them. That 
+means that the entire wifi connectivity of all devices are impacted.
+
+getPhyMode
+~~~~~~~~~~
+
+.. code:: cpp
+
+    WiFiPhyMode_t  getPhyMode (WiFiPhyMode_t mode)
+
+Gets the WiFi radio phy mode that is currently set.
+
 Other Function Calls
 ~~~~~~~~~~~~~~~~~~~~
 
 .. code:: cpp
 
     int32_t  channel (void)
     WiFiSleepType_t  getSleepMode ()
-    bool  setPhyMode (WiFiPhyMode_t mode)
-    WiFiPhyMode_t  getPhyMode ()
-    void  setOutputPower (float dBm)
-    WiFiMode_t  getMode ()
     bool  enableSTA (bool enable)
     bool  enableAP (bool enable)
     bool  forceSleepBegin (uint32 sleepUs=0)

doc/esp8266wifi/generic-class.rst

@@ -96,11 +96,8 @@ void WiFiClientSecure::_clearAuthenticationSettings() {
   _use_fingerprint = false;
   _use_self_signed = false;
   _knownkey = nullptr;
-  _sk = nullptr;
   _ta = nullptr;
   _axtls_ta = nullptr;
-  _axtls_chain = nullptr;
-  _axtls_sk = nullptr;
 }
 
 

libraries/ESP8266WiFi/src/WiFiClientSecureBearSSL.cpp

@@ -87,6 +87,7 @@ FileImplPtr LittleFSImpl::open(const char* path, OpenMode openMode, AccessMode a
         // a directory whose name we are carrying around but which cannot be read or written
         return std::make_shared<LittleFSFileImpl>(this, path, nullptr, flags, creation);
     } else if (rc == 0) {
+        lfs_file_sync(&_lfs, fd.get());
         return std::make_shared<LittleFSFileImpl>(this, path, fd, flags, creation);
     } else {
         DEBUGV("LittleFSDirImpl::openFile: rc=%d fd=%p path=`%s` openMode=%d accessMode=%d err=%d\n",

libraries/LittleFS/src/LittleFS.cpp

@@ -2,5 +2,5 @@
     "name": "framework-arduinoespressif8266",
     "description": "Arduino Wiring-based Framework (ESP8266 Core)",
     "url": "https://github.com/esp8266/Arduino",
-    "version": "3.0.0-dev"
+    "version": "2.7.3"
 }

package.json

@@ -5,8 +5,8 @@
 # For more info:
 # https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5-3rd-party-Hardware-specification
 
-name=ESP8266 Boards (3.0.0-dev)
-version=3.0.0-dev
+name=ESP8266 Boards (2.7.3)
+version=2.7.3
 
 # These will be removed by the packager script when doing a JSON release
 runtime.tools.xtensa-lx106-elf-gcc.path={runtime.platform.path}/tools/xtensa-lx106-elf

platform.txt

@@ -198,6 +198,28 @@ TEST_CASE(TESTPRE "seek() pase EOF returns error (#7323)", TESTPAT)
     f.close();
 }
 
+TEST_CASE(TESTPRE "Rewriting file frees space immediately (#7426)", TESTPAT)
+{
+    FS_MOCK_DECLARE(64, 8, 512, "");
+    REQUIRE(FSTYPE.begin());
+    FSInfo inf;
+    FSTYPE.info(inf);
+    // Calculate the size to write per-FS, due to differing overheads
+    int kbToWrite = (inf.totalBytes - inf.usedBytes - 8192) / 1024;
+    // Create and overwrite a file >50% of spaceA (48/64K)
+    for (auto x = 0; x < 2; x++) {
+        auto f = FSTYPE.open("/file1.bin", "w");
+        REQUIRE(f);
+        uint8_t buff[1024];
+        memset(buff, 0xaa, 1024);
+        for (auto i = 0; i < kbToWrite; i++) {
+            REQUIRE(f.write(buff, 1024));
+        }
+        f.close();
+        FSTYPE.info(inf);
+    }
+}
+
 #ifdef FS_HAS_DIRS
 
 #if FSTYPE != SDFS

tests/host/fs/test_fs.inc

@@ -759,8 +759,9 @@
             },
         'macro': [
             'resetmethod_nodemcu',
-            'flashmode_dio',
+            'flashmode_menu',
             'flashfreq_80',
+            '2M',
             '512K',
             ],
         'desc': [ 'gen4-IoD Range of ESP8266 powered Display Modules by 4D Systems.',
@@ -771,7 +772,7 @@
                   '',
                   'The gen4-IoD range can be programmed using the Arduino IDE and also the 4D Systems Workshop4 IDE, which incorporates many additional graphics benefits. GFX4d library is available, along with a number of demo applications.',
                   '',
-                  '- Product page: http://www.4dsystems.com.au/product/gen4-IoD',
+                  '- Product page: https://4dsystems.com.au/products/iot-display-modules',
                   ],
     }),
     ( 'oak', {