Merge branch '2.3' into 2.4

Author: weaverryan

book/controller.rst

@@ -475,7 +475,7 @@ object that's returned from that controller::
         return $response;
     }
 
-Notice that the `forward()` method uses the same string representation of
+Notice that the ``forward()`` method uses the same string representation of
 the controller used in the routing configuration. In this case, the target
 controller class will be ``HelloController`` inside some ``AcmeHelloBundle``.
 The array passed to the method becomes the arguments on the resulting controller.
@@ -794,7 +794,7 @@ The Request Object
 Besides the values of the routing placeholders, the controller also has access
 to the ``Request`` object. The framework injects the ``Request`` object in the
 controller if a variable is type-hinted with
-`Symfony\Component\HttpFoundation\Request`::
+:class:`Symfony\\Component\\HttpFoundation\\Request`::
 
     use Symfony\Component\HttpFoundation\Request;
 

book/forms.rst

@@ -495,7 +495,7 @@ these cases you can set the ``validation_groups`` option to ``false``::
 Note that when you do that, the form will still run basic integrity checks,
 for example whether an uploaded file was too large or whether non-existing
 fields were submitted. If you want to suppress validation, you can use the
-:ref:`POST_SUBMIT event <cookbook-dynamic-form-modification-suppressing-form-validation>`
+:ref:`POST_SUBMIT event <cookbook-dynamic-form-modification-suppressing-form-validation>`.
 
 .. index::
    single: Forms; Validation groups based on submitted data
@@ -1811,7 +1811,7 @@ an array.
 
         $this->get('request')->request->get('name');
 
-    Be advised, however, that in most cases using the getData() method is
+    Be advised, however, that in most cases using the ``getData()`` method is
     a better choice, since it returns the data (usually an object) after
     it's been transformed by the form framework.
 
@@ -1853,7 +1853,7 @@ but here's a short example:
 
 .. tip::
 
-    If you are using Validation Groups, you need to either reference the
+    If you are using validation groups, you need to either reference the
     ``Default`` group when creating the form, or set the correct group on
     the constraint you are adding.
 
@@ -1891,7 +1891,7 @@ Learn more from the Cookbook
 
 .. _`Symfony2 Form component`: https://github.com/symfony/Form
 .. _`DateTime`: http://php.net/manual/en/class.datetime.php
-.. _`Twig Bridge`: https://github.com/symfony/symfony/tree/2.2/src/Symfony/Bridge/Twig
-.. _`form_div_layout.html.twig`: https://github.com/symfony/symfony/blob/2.2/src/Symfony/Bridge/Twig/Resources/views/Form/form_div_layout.html.twig
+.. _`Twig Bridge`: https://github.com/symfony/symfony/tree/2.3/src/Symfony/Bridge/Twig
+.. _`form_div_layout.html.twig`: https://github.com/symfony/symfony/blob/2.3/src/Symfony/Bridge/Twig/Resources/views/Form/form_div_layout.html.twig
 .. _`Cross-site request forgery`: http://en.wikipedia.org/wiki/Cross-site_request_forgery
-.. _`view on GitHub`: https://github.com/symfony/symfony/tree/2.2/src/Symfony/Bundle/FrameworkBundle/Resources/views/Form
+.. _`view on GitHub`: https://github.com/symfony/symfony/tree/2.3/src/Symfony/Bundle/FrameworkBundle/Resources/views/Form

book/security.rst

@@ -51,7 +51,9 @@ authentication (i.e. the old-school username/password box):
                         realm: "Secured Demo Area"
 
             access_control:
-                - { path: ^/admin, roles: ROLE_ADMIN }
+                - { path: ^/admin/, roles: ROLE_ADMIN }
+                # Include the following line to also secure the /admin path itself
+                # - { path: ^/admin$, roles: ROLE_ADMIN }
 
             providers:
                 in_memory:
@@ -79,7 +81,9 @@ authentication (i.e. the old-school username/password box):
                 </firewall>
 
                 <access-control>
-                    <rule path="^/admin" role="ROLE_ADMIN" />
+                    <rule path="^/admin/" role="ROLE_ADMIN" />
+                    <!-- Include the following line to also secure the /admin path itself -->
+                    <!-- <rule path="^/admin$" role="ROLE_ADMIN" /> -->
                 </access-control>
 
                 <provider name="in_memory">
@@ -108,7 +112,9 @@ authentication (i.e. the old-school username/password box):
                 ),
             ),
             'access_control' => array(
-                array('path' => '^/admin', 'role' => 'ROLE_ADMIN'),
+                array('path' => '^/admin/', 'role' => 'ROLE_ADMIN'),
+                // Include the following line to also secure the /admin path itself
+                // array('path' => '^/admin$', 'role' => 'ROLE_ADMIN'),
             ),
             'providers' => array(
                 'in_memory' => array(

book/service_container.rst

@@ -1146,12 +1146,10 @@ with ``twig.extension`` and automatically registers them as extensions.
 Tags, then, are a way to tell Symfony2 or other third-party bundles that
 your service should be registered or used in some special way by the bundle.
 
-The following is a list of tags available with the core Symfony2 bundles.
-Each of these has a different effect on your service and many tags require
-additional arguments (beyond just the ``name`` parameter).
-
 For a list of all the tags available in the core Symfony Framework, check
-out :doc:`/reference/dic_tags`.
+out :doc:`/reference/dic_tags`. Each of these has a different effect on your
+service and many tags require additional arguments (beyond just the ``name``
+parameter).
 
 Debugging Services
 ------------------

book/templating.rst

@@ -1036,14 +1036,14 @@ stylesheets and JavaScripts that you'll need throughout your site:
             {# ... #}
 
             {% block stylesheets %}
-                <link href="{{ asset('/css/main.css') }}" rel="stylesheet" />
+                <link href="{{ asset('css/main.css') }}" rel="stylesheet" />
             {% endblock %}
         </head>
         <body>
             {# ... #}
 
             {% block javascripts %}
-                <script src="{{ asset('/js/main.js') }}"></script>
+                <script src="{{ asset('js/main.js') }}"></script>
             {% endblock %}
         </body>
     </html>
@@ -1061,7 +1061,7 @@ page. From inside that contact page's template, do the following:
     {% block stylesheets %}
         {{ parent() }}
 
-        <link href="{{ asset('/css/contact.css') }}" rel="stylesheet" />
+        <link href="{{ asset('css/contact.css') }}" rel="stylesheet" />
     {% endblock %}
 
     {# ... #}
@@ -1326,7 +1326,7 @@ covered:
           {% endfor %}
       {% endblock %}
 
-Notice that this template extends the section template -(``AcmeBlogBundle::layout.html.twig``)
+Notice that this template extends the section template (``AcmeBlogBundle::layout.html.twig``)
 which in-turn extends the base application layout (``::base.html.twig``).
 This is the common three-level inheritance model.
 

book/translation.rst

@@ -546,8 +546,8 @@ use somewhere in your application::
     }
 
 Add constraints though any of the supported methods. Set the message option to the
-translation source text. For example, to guarantee that the $name property is not
-empty, add the following:
+translation source text. For example, to guarantee that the ``$name`` property is
+not empty, add the following:
 
 .. configuration-block::
 
@@ -646,8 +646,8 @@ Translating Database Content
 ----------------------------
 
 The translation of database content should be handled by Doctrine through
-the `Translatable Extension`_. For more information, see the documentation
-for that library.
+the `Translatable Extension`_ or the `Translatable Bahavior`_ (PHP 5.4+).
+For more information, see the documentation for thes libraries.
 
 Summary
 -------
@@ -672,3 +672,4 @@ steps:
 .. _`ISO 3166-1 alpha-2`: http://en.wikipedia.org/wiki/ISO_3166-1#Current_codes
 .. _`ISO 639-1`: http://en.wikipedia.org/wiki/List_of_ISO_639-1_codes
 .. _`Translatable Extension`: https://github.com/l3pp4rd/DoctrineExtensions
+.. _`Translatable Bahavior`: https://github.com/KnpLabs/DoctrineBehaviors

book/validation.rst

@@ -985,9 +985,9 @@ entity and a new constraint group called ``Premium``:
         Acme\DemoBundle\Entity\User:
             properties:
                 name:
-                    - NotBlank
+                    - NotBlank: ~
                 creditCard:
-                    - CardScheme
+                    - CardScheme:
                         schemes: [VISA]
                         groups: [Premium]
 

components/console/helpers/dialoghelper.rst

@@ -277,7 +277,7 @@ from the command line, you need to overwrite the HelperSet used by the command::
         return $stream;
     }
 
-By setting the inputStream of the ``DialogHelper``, you imitate what the
+By setting the input stream of the ``DialogHelper``, you imitate what the
 console would do internally with all user input through the cli. This way
 you can test any user interaction (even complex ones) by passing an appropriate
 input stream.

components/console/helpers/tablehelper.rst

@@ -11,7 +11,7 @@ When building a console application it may be useful to display tabular data:
 
 .. image:: /images/components/console/table.png
 
-To display table, use the :class:`Symfony\\Component\\Console\\Helper\\TableHelper`,
+To display a table, use the :class:`Symfony\\Component\\Console\\Helper\\TableHelper`,
 set headers, rows and render::
 
     $table = $app->getHelperSet()->get('table');

components/console/introduction.rst

@@ -225,8 +225,8 @@ verbosity levels::
     }
 
 When the quiet level is used, all output is suppressed as the default
-:method:`Symfony\Component\Console\Output::write <Symfony\\Component\\Console\\Output\\Output::write>`
-method returns without actually printing.
+:method:`Symfony\\Component\\Console\\Output\\Output::write` method returns
+without actually printing.
 
 .. tip::
 
@@ -321,13 +321,13 @@ Unlike arguments, options are not ordered (meaning you can specify them in any
 order) and are specified with two dashes (e.g. ``--yell`` - you can also
 declare a one-letter shortcut that you can call with a single dash like
 ``-y``). Options are *always* optional, and can be setup to accept a value
-(e.g. ``dir=src``) or simply as a boolean flag without a value (e.g.
-``yell``).
+(e.g. ``--dir=src``) or simply as a boolean flag without a value (e.g.
+``--yell``).
 
 .. tip::
 
     It is also possible to make an option *optionally* accept a value (so that
-    ``--yell`` or ``yell=loud`` work). Options can also be configured to
+    ``--yell`` or ``--yell=loud`` work). Options can also be configured to
     accept an array of values.
 
 For example, add a new option to the command that can be used to specify
@@ -379,7 +379,7 @@ Option                       Value
 InputOption::VALUE_IS_ARRAY  This option accepts multiple values (e.g. ``--dir=/foo --dir=/bar``)
 InputOption::VALUE_NONE      Do not accept input for this option (e.g. ``--yell``)
 InputOption::VALUE_REQUIRED  This value is required (e.g. ``--iterations=5``), the option itself is still optional
-InputOption::VALUE_OPTIONAL  This option may or may not have a value (e.g. ``yell`` or ``yell=loud``)
+InputOption::VALUE_OPTIONAL  This option may or may not have a value (e.g. ``--yell`` or ``--yell=loud``)
 ===========================  =====================================================================================
 
 You can combine ``VALUE_IS_ARRAY`` with ``VALUE_REQUIRED`` or ``VALUE_OPTIONAL`` like this:

components/dependency_injection/advanced.rst

@@ -142,6 +142,18 @@ service by asking for the ``bar`` service like this::
 
     $container->get('bar'); // Would return the foo service
 
+.. tip::
+
+    In YAML, you can also use a shortcut to alias a service:
+
+    .. code-block:: yaml
+
+        services:
+           foo:
+             class: Example\Foo
+           bar: "@foo"
+
+
 Requiring files
 ---------------
 
@@ -169,5 +181,5 @@ the service itself gets loaded. To do so, you can use the ``file`` directive.
         $definition->setFile('%kernel.root_dir%/src/path/to/file/foo.php');
         $container->setDefinition('foo', $definition);
 
-Notice that Symfony will internally call the PHP function require_once
+Notice that Symfony will internally call the PHP statement ``require_once``,
 which means that your file will be included only once per request.

components/dependency_injection/definitions.rst

@@ -104,7 +104,7 @@ Add a method call with::
 
    $definition->addMethodCall($method, $arguments);
 
-Where ``$method`` is the method name and $arguments is an array of the arguments
+Where ``$method`` is the method name and ``$arguments`` is an array of the arguments
 to call the method with. The arguments can be strings, arrays, parameters or
 service ids as with the constructor arguments.
 

components/dependency_injection/introduction.rst

@@ -9,7 +9,7 @@ The DependencyInjection Component
     the way objects are constructed in your application.
 
 For an introduction to Dependency Injection and service containers see
-:doc:`/book/service_container`
+:doc:`/book/service_container`.
 
 Installation
 ------------
@@ -181,7 +181,7 @@ Setting Up the Container with Configuration Files
 As well as setting up the services using PHP as above you can also use
 configuration files. This allows you to use XML or YAML to write the definitions
 for the services rather than using PHP to define the services as in the above
-examples. In anything but the smallest applications it make sense to organize
+examples. In anything but the smallest applications it makes sense to organize
 the service definitions by moving them into one or more configuration files.
 To do this you also need to install
 :doc:`the Config component </components/config/introduction>`.

components/dependency_injection/parentservices.rst

@@ -68,7 +68,7 @@ The service config for these classes would look something like this:
                     - [setEmailFormatter, ["@my_email_formatter"]]
 
             greeting_card_manager:
-                class:     "%greeting_card_manager.class%"
+                class: "%greeting_card_manager.class%"
                 calls:
                     - [setMailer, ["@my_mailer"]]
                     - [setEmailFormatter, ["@my_email_formatter"]]

components/dependency_injection/tags.rst

@@ -235,6 +235,18 @@ To answer this, change the service declaration:
             <tag name="acme_mailer.transport" alias="bar" />
         </service>
 
+    .. code-block:: php
+
+        use Symfony\Component\DependencyInjection\Definition;
+
+        $definitionSmtp = new Definition('\Swift_SmtpTransport', array('%mailer_host%'));
+        $definitionSmtp->addTag('acme_mailer.transport', array('alias' => 'foo'));
+        $container->setDefinition('acme_mailer.transport.smtp', $definitionSmtp);
+
+        $definitionSendmail = new Definition('\Swift_SendmailTransport');
+        $definitionSendmail->addTag('acme_mailer.transport', array('alias' => 'bar'));
+        $container->setDefinition('acme_mailer.transport.sendmail', $definitionSendmail);
+
 Notice that you've added a generic ``alias`` key to the tag. To actually
 use this, update the compiler::
 

components/http_foundation/introduction.rst

@@ -264,7 +264,7 @@ If you need to get full access to parsed data from ``Accept``, ``Accept-Language
         $quality = $item->getQuality();
     }
 
-    // accepts items are sorted by descending quality
+    // Accept header items are sorted by descending quality
     $accepts = AcceptHeader::fromString($request->headers->get('Accept'))
         ->all();
 
@@ -423,7 +423,7 @@ method::
         $response->send();
     }
 
-If the Response is not modified, it sets the status code to 304 and remove the
+If the Response is not modified, it sets the status code to 304 and removes the
 actual response content.
 
 Redirecting the User

components/property_access/introduction.rst

@@ -322,7 +322,7 @@ You can also mix objects and arrays::
 
         public function setChildren($children)
         {
-            return $this->children;
+            $this->children = $children;
         }
 
         public function getChildren()

components/routing/introduction.rst

@@ -73,17 +73,17 @@ Defining routes
 A full route definition can contain up to seven parts:
 
 1. The URL path route. This is matched against the URL passed to the `RequestContext`,
-and can contain named wildcard placeholders (e.g. ``{placeholders}``)
-to match dynamic parts in the URL.
+   and can contain named wildcard placeholders (e.g. ``{placeholders}``)
+   to match dynamic parts in the URL.
 
 2. An array of default values. This contains an array of arbitrary values
-that will be returned when the request matches the route.
+   that will be returned when the request matches the route.
 
 3. An array of requirements. These define constraints for the values of the
-placeholders as regular expressions.
+   placeholders as regular expressions.
 
 4. An array of options. These contain internal settings for the route and
-are the least commonly needed.
+   are the least commonly needed.
 
 5. A host. This is matched against the host of the request. See
    :doc:`/components/routing/hostname_pattern` for more details.

components/translation/usage.rst

@@ -95,7 +95,7 @@ The second step is done by creating message catalogs that define the translation
 for any number of different locales.
 
 Creating Translations
-=====================
+---------------------
 
 The act of creating translation files is an important part of "localization"
 (often abbreviated `L10n`_). Translation files consist of a series of

contributing/code/bc.rst

@@ -238,7 +238,7 @@ Symfony's classes:
 Type of Change                                      Regular         API
 ==================================================  ==============  ==============
 Remove entirely                                     No              No
-Make final                                          Yes [2]_        No
+Make final                                          No              No
 Make abstract                                       No              No
 Change name or namespace                            No              No
 Change parent class                                 Yes [7]_        Yes [7]_

cookbook/bundles/inheritance.rst

@@ -12,7 +12,7 @@ things like controllers, templates, and other files in a bundle's
 
 For example, suppose that you're installing the `FOSUserBundle`_, but you
 want to override its base ``layout.html.twig`` template, as well as one of
-its controllers. Suppose also that you have your own ``AcmeUserBundle``
+its controllers. Suppose also that you have your own AcmeUserBundle
 where you want the overridden files to live. Start by registering the FOSUserBundle
 as the "parent" of your bundle::