Skip to content

Commit 2b8815e

Browse files
fpistmfpistm
committed
[PinMap] Update with new formatting, pins and directories
Signed-off-by: Frederic Pillon <frederic.pillon@st.com>
1 parent d704b28 commit 2b8815e

File tree

4,856 files changed

+1014567
-0
lines changed

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

4,856 files changed

+1014567
-0
lines changed

‎src/genpinmap/Arduino/STM32F0xx/STM32F030C6Tx/PeripheralPins.c

Lines changed: 192 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,192 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
/*
14+
* Automatically generated from STM32F030C6Tx.xml
15+
* CubeMX DB release 6.0.10
16+
*/
17+
#include "Arduino.h"
18+
#include "PeripheralPins.h"
19+
20+
/* =====
21+
* Notes:
22+
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other
23+
* HW peripheral instances. You can use them the same way as any other "normal"
24+
* pin (i.e. analogWrite(PA7_ALT0, 128);).
25+
*
26+
* - Commented lines are alternative possibilities which are not used per default.
27+
* If you change them, you will have to know what you do
28+
* =====
29+
*/
30+
31+
//*** ADC ***
32+
33+
#ifdef HAL_ADC_MODULE_ENABLED
34+
WEAK const PinMap PinMap_ADC[] = {
35+
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
36+
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
37+
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2
38+
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3
39+
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
40+
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5
41+
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
42+
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
43+
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8
44+
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9
45+
{NC, NP, 0}
46+
};
47+
#endif
48+
49+
//*** No DAC ***
50+
51+
//*** I2C ***
52+
53+
#ifdef HAL_I2C_MODULE_ENABLED
54+
WEAK const PinMap PinMap_I2C_SDA[] = {
55+
{PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
56+
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
57+
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
58+
{PB_11, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
59+
{PF_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)},
60+
{NC, NP, 0}
61+
};
62+
#endif
63+
64+
#ifdef HAL_I2C_MODULE_ENABLED
65+
WEAK const PinMap PinMap_I2C_SCL[] = {
66+
{PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
67+
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
68+
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
69+
{PB_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
70+
{PF_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)},
71+
{NC, NP, 0}
72+
};
73+
#endif
74+
75+
//*** TIM ***
76+
77+
#ifdef HAL_TIM_MODULE_ENABLED
78+
WEAK const PinMap PinMap_TIM[] = {
79+
{PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1
80+
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1
81+
{PA_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1
82+
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N
83+
{PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2
84+
{PA_7_ALT2, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1
85+
{PA_7_ALT3, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1
86+
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1
87+
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2
88+
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3
89+
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4
90+
{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N
91+
{PB_0_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3
92+
{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N
93+
{PB_1_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4
94+
{PB_1_ALT2, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1
95+
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1
96+
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2
97+
{PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N
98+
{PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N
99+
{PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1
100+
{PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1
101+
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N
102+
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N
103+
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N
104+
{NC, NP, 0}
105+
};
106+
#endif
107+
108+
//*** UART ***
109+
110+
#ifdef HAL_UART_MODULE_ENABLED
111+
WEAK const PinMap PinMap_UART_TX[] = {
112+
{PA_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
113+
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
114+
{PA_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
115+
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
116+
{NC, NP, 0}
117+
};
118+
#endif
119+
120+
#ifdef HAL_UART_MODULE_ENABLED
121+
WEAK const PinMap PinMap_UART_RX[] = {
122+
{PA_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
123+
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
124+
{PA_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
125+
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
126+
{NC, NP, 0}
127+
};
128+
#endif
129+
130+
#ifdef HAL_UART_MODULE_ENABLED
131+
WEAK const PinMap PinMap_UART_RTS[] = {
132+
{PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
133+
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
134+
{NC, NP, 0}
135+
};
136+
#endif
137+
138+
#ifdef HAL_UART_MODULE_ENABLED
139+
WEAK const PinMap PinMap_UART_CTS[] = {
140+
{PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
141+
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
142+
{NC, NP, 0}
143+
};
144+
#endif
145+
146+
//*** SPI ***
147+
148+
#ifdef HAL_SPI_MODULE_ENABLED
149+
WEAK const PinMap PinMap_SPI_MOSI[] = {
150+
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
151+
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
152+
{PB_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
153+
{NC, NP, 0}
154+
};
155+
#endif
156+
157+
#ifdef HAL_SPI_MODULE_ENABLED
158+
WEAK const PinMap PinMap_SPI_MISO[] = {
159+
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
160+
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
161+
{PB_14, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
162+
{NC, NP, 0}
163+
};
164+
#endif
165+
166+
#ifdef HAL_SPI_MODULE_ENABLED
167+
WEAK const PinMap PinMap_SPI_SCLK[] = {
168+
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
169+
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
170+
{PB_13, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
171+
{NC, NP, 0}
172+
};
173+
#endif
174+
175+
#ifdef HAL_SPI_MODULE_ENABLED
176+
WEAK const PinMap PinMap_SPI_SSEL[] = {
177+
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
178+
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
179+
{PB_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
180+
{NC, NP, 0}
181+
};
182+
#endif
183+
184+
//*** No CAN ***
185+
186+
//*** No ETHERNET ***
187+
188+
//*** No QUADSPI ***
189+
190+
//*** No USB ***
191+
192+
//*** No SD ***

‎src/genpinmap/Arduino/STM32F0xx/STM32F030C6Tx/PinNamesVar.h

Lines changed: 36 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,36 @@
1+
/* Alternate pin name */
2+
PA_6_ALT1 = PA_6 | ALT1,
3+
PA_7_ALT1 = PA_7 | ALT1,
4+
PA_7_ALT2 = PA_7 | ALT2,
5+
PA_7_ALT3 = PA_7 | ALT3,
6+
PB_0_ALT1 = PB_0 | ALT1,
7+
PB_1_ALT1 = PB_1 | ALT1,
8+
PB_1_ALT2 = PB_1 | ALT2,
9+
10+
/* SYS_WKUP */
11+
#ifdef PWR_WAKEUP_PIN1
12+
SYS_WKUP1 = PA_0,
13+
#endif
14+
#ifdef PWR_WAKEUP_PIN2
15+
SYS_WKUP2 = PC_13,
16+
#endif
17+
#ifdef PWR_WAKEUP_PIN3
18+
SYS_WKUP3 = NC,
19+
#endif
20+
#ifdef PWR_WAKEUP_PIN4
21+
SYS_WKUP4 = NC,
22+
#endif
23+
#ifdef PWR_WAKEUP_PIN5
24+
SYS_WKUP5 = NC,
25+
#endif
26+
#ifdef PWR_WAKEUP_PIN6
27+
SYS_WKUP6 = NC,
28+
#endif
29+
#ifdef PWR_WAKEUP_PIN7
30+
SYS_WKUP7 = NC,
31+
#endif
32+
#ifdef PWR_WAKEUP_PIN8
33+
SYS_WKUP8 = NC,
34+
#endif
35+
36+
/* No USB */

‎src/genpinmap/Arduino/STM32F0xx/STM32F030C6Tx/variant.cpp

Lines changed: 89 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,89 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
14+
#include "pins_arduino.h"
15+
16+
#ifdef __cplusplus
17+
extern "C" {
18+
#endif
19+
20+
// Digital PinName array
21+
const PinName digitalPin[] = {
22+
PA_0,
23+
PA_1,
24+
PA_2,
25+
PA_3,
26+
PA_4,
27+
PA_5,
28+
PA_6,
29+
PA_7,
30+
PA_8,
31+
PA_9,
32+
PA_10,
33+
PA_11,
34+
PA_12,
35+
PA_13,
36+
PA_14,
37+
PA_15,
38+
PB_0,
39+
PB_1,
40+
PB_2,
41+
PB_3,
42+
PB_4,
43+
PB_5,
44+
PB_6,
45+
PB_7,
46+
PB_8,
47+
PB_9,
48+
PB_10,
49+
PB_11,
50+
PB_12,
51+
PB_13,
52+
PB_14,
53+
PB_15,
54+
PC_13,
55+
PC_14,
56+
PC_15,
57+
PF_0,
58+
PF_1,
59+
PF_6,
60+
PF_7
61+
};
62+
63+
// Analog (Ax) pin number array
64+
const uint32_t analogInputPin[] = {
65+
0, // A0, PA0
66+
1, // A1, PA1
67+
2, // A2, PA2
68+
3, // A3, PA3
69+
4, // A4, PA4
70+
5, // A5, PA5
71+
6, // A6, PA6
72+
7, // A7, PA7
73+
16, // A8, PB0
74+
17 // A9, PB1
75+
};
76+
77+
/**
78+
* @brief System Clock Configuration
79+
* @param None
80+
* @retval None
81+
*/
82+
WEAK void SystemClock_Config(void)
83+
{
84+
/* SystemClock_Config can be generated by STM32CubeMX */
85+
}
86+
87+
#ifdef __cplusplus
88+
} // extern "C"
89+
#endif

0 commit comments

Comments
 (0)