diff --git a/CI/build/conf/cores_config.json b/CI/build/conf/cores_config.json
index 8cd9048fc8..a69823bbdc 100644
--- a/CI/build/conf/cores_config.json
+++ b/CI/build/conf/cores_config.json
@@ -58,6 +58,7 @@
"NUCLEO_H743ZI",
"NUCLEO_L496ZG",
"NUCLEO_L4R5ZI",
+ "PYBSTICK26_DUINO", "PYBSTICK26_LITE", "PYBSTICK26_STD",
"RAK811_TRACKERA"
]
},
@@ -104,6 +105,7 @@
"BLACKPILL_F303CC",
"BLACKPILL_F401CC",
"CoreBoard_F401RC",
+ "DAISY_SEED",
"DIYMORE_F407VGT",
"EEXTR_F030_V1",
"ELEKTOR_F072C8",
diff --git a/CI/build/conf/cores_config_ci.json b/CI/build/conf/cores_config_ci.json
index 4e17cddafa..8444f3a04d 100644
--- a/CI/build/conf/cores_config_ci.json
+++ b/CI/build/conf/cores_config_ci.json
@@ -57,6 +57,7 @@
"NUCLEO_H743ZI",
"NUCLEO_L496ZG",
"NUCLEO_L4R5ZI",
+ "PYBSTICK26_DUINO", "PYBSTICK26_LITE", "PYBSTICK26_STD",
"RAK811_TRACKERA"
]
}
diff --git a/README.md b/README.md
index 3a409ca6b5..d41156575f 100644
--- a/README.md
+++ b/README.md
@@ -53,6 +53,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
- [Generic STM32F1 boards](#generic-stm32f1-boards)
- [Generic STM32F3 boards](#generic-stm32f3-boards)
- [Generic STM32F4 boards](#generic-stm32f4-boards)
+ - [Generic STM32H7 boards](#generic-stm32h7-boards)
- [Generic STM32L0 boards](#generic-stm32l0-boards)
- [3D printer boards](#3d-printer-boards)
- [LoRa boards](#lora-boards)
@@ -200,6 +201,12 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
| :yellow_heart: | STM32F446RC
STM32F446RE | Generic Board | **1.9.0** | |
| :yellow_heart: | STM32F411CE | [ThunderPack v1.1+](https://github.com/jgillick/ThunderPack) | **1.9.0** | |
+### Generic STM32H7 boards
+
+| Status | Device(s) | Name | Release | Notes |
+| :----: | :-------: | ---- | :-----: | :---- |
+| :yellow_heart: | STM32H750IB | [Daisy ](https://www.electro-smith.com/daisy/daisy) | **1.9.0** | |
+
### Generic STM32L0 boards
| Status | Device(s) | Name | Release | Notes |
diff --git a/boards.txt b/boards.txt
index 6821aaf15d..8e3c16b82e 100644
--- a/boards.txt
+++ b/boards.txt
@@ -1622,6 +1622,42 @@ GenF4.menu.upload_method.hidMethod.upload.tool=hid_upload
GenF4.menu.upload_method.hidMethod.build.flash_offset=0x4000
GenF4.menu.upload_method.hidMethod.build.bootloader_flags=-DBL_HID -DVECT_TAB_OFFSET={build.flash_offset}
+################################################################################
+# Generic H7
+GenH7.name=Generic STM32H7 Series
+
+GenH7.build.core=arduino
+GenH7.build.board=GenH7
+GenH7.build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial}
+GenH7.build.cmsis_lib_gcc=arm_cortexM7lfsp_math
+GenH7.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
+GenH7.build.series=STM32H7xx
+GenH7.build.mcu=cortex-m7
+
+# Daisy Seed board
+GenH7.menu.pnum.DAISY_SEED=Daisy Seed
+GenH7.menu.pnum.DAISY_SEED.upload.maximum_size=131072
+GenH7.menu.pnum.DAISY_SEED.upload.maximum_data_size=524288
+GenH7.menu.pnum.DAISY_SEED.build.board=DAISY_SEED
+GenH7.menu.pnum.DAISY_SEED.build.product_line=STM32H750xx
+GenH7.menu.pnum.DAISY_SEED.build.variant=DAISY_SEED
+
+# Upload menu
+GenH7.menu.upload_method.swdMethod=STM32CubeProgrammer (SWD)
+GenH7.menu.upload_method.swdMethod.upload.protocol=0
+GenH7.menu.upload_method.swdMethod.upload.options=-g
+GenH7.menu.upload_method.swdMethod.upload.tool=stm32CubeProg
+
+GenH7.menu.upload_method.serialMethod=STM32CubeProgrammer (Serial)
+GenH7.menu.upload_method.serialMethod.upload.protocol=1
+GenH7.menu.upload_method.serialMethod.upload.options={serial.port.file} -s
+GenH7.menu.upload_method.serialMethod.upload.tool=stm32CubeProg
+
+GenH7.menu.upload_method.dfuMethod=STM32CubeProgrammer (DFU)
+GenH7.menu.upload_method.dfuMethod.upload.protocol=2
+GenH7.menu.upload_method.dfuMethod.upload.options=-g
+GenH7.menu.upload_method.dfuMethod.upload.tool=stm32CubeProg
+
################################################################################
# Generic L0
GenL0.name=Generic STM32L0 series
@@ -2222,6 +2258,12 @@ GenF4.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
GenF4.menu.xserial.disabled=Disabled (no Serial support)
GenF4.menu.xserial.disabled.build.xSerial=
+GenH7.menu.xserial.generic=Enabled (generic 'Serial')
+GenH7.menu.xserial.none=Enabled (no generic 'Serial')
+GenH7.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
+GenH7.menu.xserial.disabled=Disabled (No Serial support)
+GenH7.menu.xserial.disabled.build.xSerial=
+
GenL0.menu.xserial.generic=Enabled (generic 'Serial')
GenL0.menu.xserial.none=Enabled (no generic 'Serial')
GenL0.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
@@ -2369,6 +2411,17 @@ GenF4.menu.xusb.HS.build.usb_speed=-DUSE_USB_HS
GenF4.menu.xusb.HSFS=High Speed in Full Speed mode
GenF4.menu.xusb.HSFS.build.usb_speed=-DUSE_USB_HS -DUSE_USB_HS_IN_FS
+GenH7.menu.usb.none=None
+GenH7.menu.usb.CDCgen=CDC (generic 'Serial' supersede U(S)ART)
+GenH7.menu.usb.CDCgen.build.enable_usb={build.usb_flags} -DUSBD_USE_CDC
+GenH7.menu.usb.CDC=CDC (no generic 'Serial')
+GenH7.menu.usb.CDC.build.enable_usb={build.usb_flags} -DUSBD_USE_CDC -DDISABLE_GENERIC_SERIALUSB
+GenH7.menu.usb.HID=HID (keyboard and mouse)
+GenH7.menu.usb.HID.build.enable_usb={build.usb_flags} -DUSBD_USE_HID_COMPOSITE
+GenH7.menu.xusb.FS=Low/Full Speed
+GenH7.menu.xusb.HSFS=High Speed in Full Speed mode
+GenH7.menu.xusb.HSFS.build.usb_speed=-DUSE_USB_HS -DUSE_USB_HS_IN_FS
+
GenL0.menu.usb.none=None
GenL0.menu.usb.CDCgen=CDC (generic 'Serial' supersede U(S)ART)
GenL0.menu.usb.CDCgen.build.enable_usb={build.usb_flags} -DUSBD_USE_CDC
@@ -2605,6 +2658,24 @@ GenF4.menu.opt.o3lto.build.flags.optimize=-O3 -flto
GenF4.menu.opt.ogstd=Debug (-g)
GenF4.menu.opt.ogstd.build.flags.optimize=-g -Og
+GenH7.menu.opt.osstd=Smallest (-Os default)
+GenH7.menu.opt.oslto=Smallest (-Os) with LTO
+GenH7.menu.opt.oslto.build.flags.optimize=-Os -flto
+GenH7.menu.opt.o1std=Fast (-O1)
+GenH7.menu.opt.o1std.build.flags.optimize=-O1
+GenH7.menu.opt.o1lto=Fast (-O1) with LTO
+GenH7.menu.opt.o1lto.build.flags.optimize=-O1 -flto
+GenH7.menu.opt.o2std=Faster (-O2)
+GenH7.menu.opt.o2std.build.flags.optimize=-O2
+GenH7.menu.opt.o2lto=Faster (-O2) with LTO
+GenH7.menu.opt.o2lto.build.flags.optimize=-O2 -flto
+GenH7.menu.opt.o3std=Fastest (-O3)
+GenH7.menu.opt.o3std.build.flags.optimize=-O3
+GenH7.menu.opt.o3lto=Fastest (-O3) with LTO
+GenH7.menu.opt.o3lto.build.flags.optimize=-O3 -flto
+GenH7.menu.opt.ogstd=Debug (-g)
+GenH7.menu.opt.ogstd.build.flags.optimize=-g -Og
+
GenL0.menu.opt.osstd=Smallest (-Os default)
GenL0.menu.opt.oslto=Smallest (-Os) with LTO
GenL0.menu.opt.oslto.build.flags.optimize=-Os -flto
@@ -2832,6 +2903,16 @@ GenF4.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float
GenF4.menu.rtlib.full=Newlib Standard
GenF4.menu.rtlib.full.build.flags.ldspecs=
+GenH7.menu.rtlib.nano=Newlib Nano (default)
+GenH7.menu.rtlib.nanofp=Newlib Nano + Float Printf
+GenH7.menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float
+GenH7.menu.rtlib.nanofs=Newlib Nano + Float Scanf
+GenH7.menu.rtlib.nanofs.build.flags.ldspecs=--specs=nano.specs -u _scanf_float
+GenH7.menu.rtlib.nanofps=Newlib Nano + Float Printf/Scanf
+GenH7.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float -u _scanf_float
+GenH7.menu.rtlib.full=Newlib Standard
+GenH7.menu.rtlib.full.build.flags.ldspecs=
+
GenL0.menu.rtlib.nano=Newlib Nano (default)
GenL0.menu.rtlib.nanofp=Newlib Nano + Float Printf
GenL0.menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float
diff --git a/variants/DAISY_SEED/PeripheralPins.c b/variants/DAISY_SEED/PeripheralPins.c
new file mode 100644
index 0000000000..95d31df52e
--- /dev/null
+++ b/variants/DAISY_SEED/PeripheralPins.c
@@ -0,0 +1,618 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2020, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ * Automatically generated from STM32H750IBKx.xml
+ */
+#include "Arduino.h"
+#include "PeripheralPins.h"
+
+/* =====
+ * Note: Commented lines are alternative possibilities which are not used per default.
+ * If you change them, you will have to know what you do
+ * =====
+ */
+
+//*** ADC ***
+
+#ifdef HAL_ADC_MODULE_ENABLED
+WEAK const PinMap PinMap_ADC[] = {
+ {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_INP16
+ //{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_INN16
+ {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC1_INP17
+ {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_INP14
+ //{PA_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_INP14
+ {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_INP15
+ //{PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_INP15
+ {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC1_INP18
+ //{PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC2_INP18
+ //{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC1_INN18
+ {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC1_INP19
+ //{PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC2_INN18
+ //{PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC2_INP19
+ {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_INP3
+ //{PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_INP3
+ //{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_INN3
+ {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_INP7
+ //{PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_INN3
+ //{PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_INP7
+ //{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_INN5
+ //{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_INP9
+ //{PB_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_INN5
+ //{PB_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_INP9
+ {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_INP5
+ //{PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_INP5
+ {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_INP10
+ //{PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_INP10
+ //{PC_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_INP10
+ //{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_INN10
+ {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_INP11
+ //{PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_INN10
+ //{PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_INP11
+ //{PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_INN10
+ //{PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_INP11
+ //{PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_INN1
+ //{PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_INP0
+ //{PC_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_INP1
+ {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_INP4
+ //{PC_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_INP4
+ //{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_INN4
+ //{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_INP8
+ //{PC_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_INN4
+ //{PC_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_INP8
+ //{PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_INP5
+ //{PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_INN5
+ //{PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_INP9
+ //{PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_INP4
+ //{PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_INN4
+ //{PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_INP8
+ //{PF_7, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_INP3
+ //{PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_INN3
+ //{PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_INP7
+ //{PF_9, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_INP2
+ //{PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_INN2
+ //{PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_INP6
+ //{PF_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_INP2
+ //{PF_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_INN2
+ //{PF_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_INP6
+ //{PF_13, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_INP2
+ //{PF_14, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_INN2
+ //{PF_14, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_INP6
+ //{PH_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_INP13
+ //{PH_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_INN13
+ //{PH_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_INP14
+ //{PH_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_INN14
+ //{PH_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_INP15
+ //{PH_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_INN15
+ //{PH_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC3_INP16
+ {NC, NP, 0}
+};
+#endif
+
+//*** DAC ***
+
+#ifdef HAL_DAC_MODULE_ENABLED
+WEAK const PinMap PinMap_DAC[] = {
+ {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1
+ {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2
+ {NC, NP, 0}
+};
+#endif
+
+//*** I2C ***
+
+#ifdef HAL_I2C_MODULE_ENABLED
+WEAK const PinMap PinMap_I2C_SDA[] = {
+ //{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_7, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
+ {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ //{PB_9, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
+ //{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ //{PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ //{PD_13, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+ //{PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ //{PF_15, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+ //{PH_5, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ //{PH_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ //{PH_12, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_I2C_MODULE_ENABLED
+WEAK const PinMap PinMap_I2C_SCL[] = {
+ //{PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ //{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_6, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
+ {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ //{PB_8, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
+ //{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ //{PD_12, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+ //{PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ //{PF_14, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+ //{PH_4, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ //{PH_7, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ //{PH_11, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** PWM ***
+
+#ifdef HAL_TIM_MODULE_ENABLED
+WEAK const PinMap PinMap_PWM[] = {
+ {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+ //{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
+ {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
+ //{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
+ //{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 1)}, // TIM15_CH1N
+ {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
+ //{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
+ //{PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 0)}, // TIM15_CH1
+ {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
+ //{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
+ //{PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 2, 0)}, // TIM15_CH2
+ {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+ //{PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
+ {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ //{PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
+ //{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
+ //{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
+ {PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
+ //{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
+ //{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
+ //{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
+ //{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
+ //{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
+ //{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+ //{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ //{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
+ //{PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
+ {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+ //{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+ //{PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
+ //{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
+ {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
+ {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
+ //{PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
+ {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
+ //{PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N
+ {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
+ //{PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
+ {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
+ //{PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
+ //{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
+ //{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
+ //{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
+ //{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ {PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
+ //{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM12, 1, 0)}, // TIM12_CH1
+ //{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+ {PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
+ //{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM12, 2, 0)}, // TIM12_CH2
+ //{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ //{PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
+ //{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
+ {PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
+ //{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
+ {PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
+ //{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+ {PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
+ //{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
+ //{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
+ //{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
+ //{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
+ //{PE_4, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 1)}, // TIM15_CH1N
+ //{PE_5, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 0)}, // TIM15_CH1
+ //{PE_6, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 2, 0)}, // TIM15_CH2
+ //{PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
+ //{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
+ //{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ //{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
+ //{PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+ //{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
+ //{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
+ //{PF_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
+ //{PF_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
+ //{PF_8, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
+ //{PF_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
+ //{PF_9, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
+ //{PF_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N
+ //{PH_6, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM12, 1, 0)}, // TIM12_CH1
+ //{PH_9, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM12, 2, 0)}, // TIM12_CH2
+ //{PH_10, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
+ //{PH_11, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
+ //{PH_12, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
+ //{PH_13, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
+ //{PH_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
+ //{PH_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
+ //{PI_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
+ //{PI_2, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
+ //{PI_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
+ //{PI_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
+ //{PI_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
+ {NC, NP, 0}
+};
+#endif
+
+//*** SERIAL ***
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_TX[] = {
+ {PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ //{PA_9, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)},
+ //{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ //{PA_12, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4)},
+ //{PA_15, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
+ {PB_4, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
+ //{PB_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)},
+ //{PB_6, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
+ {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_9, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ //{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ //{PB_13, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
+ {PB_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
+ //{PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ {PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ //{PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ //{PD_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ //{PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ //{PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ //{PE_1, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
+ //{PE_8, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ //{PF_7, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ //{PG_14, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ //{PH_13, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_RX[] = {
+ {PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ //{PA_8, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
+ //{PA_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)},
+ //{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ //{PA_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4)},
+ //{PB_3, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
+ {PB_5, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
+ //{PB_7, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)},
+ {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_8, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ //{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PB_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
+ {PB_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
+ //{PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ {PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ //{PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ //{PD_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ //{PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ //{PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ //{PE_0, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
+ //{PE_7, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ //{PF_6, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ //{PG_9, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ //{PH_14, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ //{PI_9, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_RTS[] = {
+ {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ //{PA_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)},
+ //{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ //{PA_15, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PB_14, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ //{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PC_8, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ //{PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ //{PD_12, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ //{PD_15, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
+ //{PE_9, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ //{PF_8, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ //{PG_8, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ //{PG_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_CTS[] = {
+ {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ //{PA_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)},
+ //{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ //{PB_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ //{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PB_15, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PC_9, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ //{PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PD_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ //{PD_14, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
+ //{PE_10, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ //{PF_9, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ //{PG_13, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ //{PG_15, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** SPI ***
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ //{PA_7, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
+ //{PB_2, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
+ {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ //{PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
+ //{PB_5, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
+ //{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ //{PC_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ //{PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ //{PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ //{PD_6, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI3)},
+ //{PD_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ //{PE_6, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ //{PE_14, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ //{PF_9, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ //{PF_11, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ //{PG_14, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
+ //{PI_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ //{PA_6, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
+ {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ //{PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ //{PB_4, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
+ //{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ //{PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ //{PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ //{PE_5, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ //{PE_13, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ //{PF_8, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ {PG_9, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ //{PG_12, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
+ //{PH_7, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ //{PI_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ //{PA_5, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
+ //{PA_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ //{PA_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ //{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ //{PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ //{PB_3, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
+ //{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ //{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ //{PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ //{PD_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ //{PE_2, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ //{PE_12, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ //{PF_7, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ {PG_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ //{PG_13, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
+ //{PH_6, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ //{PI_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ //{PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ //{PA_4, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
+ //{PA_11, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ //{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ //{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ //{PA_15, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI6)},
+ //{PB_4, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI2)},
+ //{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ //{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ //{PE_4, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ //{PE_11, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ //{PF_6, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ //{PG_8, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
+ {PG_10, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ //{PH_5, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ //{PI_0, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** FDCAN ***
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+WEAK const PinMap PinMap_CAN_RD[] = {
+ //{PA_11, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
+ {PB_5, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
+ {PB_8, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
+ {PB_12, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
+ //{PD_0, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
+ //{PH_14, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
+ //{PI_9, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+WEAK const PinMap PinMap_CAN_TD[] = {
+ //{PA_12, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
+ {PB_6, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
+ {PB_9, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
+ //{PB_13, FDCAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
+ //{PD_1, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
+ //{PH_13, FDCAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** ETHERNET ***
+
+#ifdef HAL_ETH_MODULE_ENABLED
+WEAK const PinMap PinMap_Ethernet[] = {
+ {PA_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS
+ {PA_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_REF_CLK|ETH_RX_CLK
+ {PA_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDIO
+ {PA_3, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_COL
+ {PA_7, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS_DV|ETH_RX_DV
+ //{PB_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD2
+ {PB_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD3
+ {PB_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT
+ {PB_8, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3
+ //{PB_10, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RX_ER
+ //{PB_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN
+ {PB_12, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0
+ //{PB_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1
+ {PC_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDC
+ //{PC_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD2
+ //{PC_3, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_CLK
+ {PC_4, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD0
+ //{PC_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD1
+ //{PE_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3
+ //{PG_8, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT
+ {PG_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN
+ //{PG_12, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1
+ //{PG_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0
+ //{PG_14, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1
+ //{PH_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS
+ //{PH_3, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_COL
+ //{PH_6, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD2
+ //{PH_7, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD3
+ //{PI_10, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RX_ER
+ {NC, NP, 0}
+};
+#endif
+
+//*** QUADSPI ***
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+WEAK const PinMap PinMap_QUADSPI[] = {
+ //{PA_1, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AFd9_QUADSPI)}, // QUADSPI_BK1_IO3
+ //{PB_2, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_CLK
+ //{PB_6, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_NCS
+ //{PB_10, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_NCS
+ //{PC_9, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_IO0
+ //{PC_10, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_IO1
+ //{PC_11, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK2_NCS
+ //{PD_11, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_IO0
+ //{PD_12, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_IO1
+ //{PD_13, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_IO3
+ //{PE_2, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_IO2
+ //{PE_7, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK2_IO0
+ //{PE_8, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK2_IO1
+ //{PE_9, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK2_IO2
+ //{PE_10, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK2_IO3
+ {PF_6, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_IO3
+ {PF_7, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_IO2
+ {PF_8, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO0
+ {PF_9, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO1
+ {PF_10, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_CLK
+ {PG_6, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_NCS
+ //{PG_9, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK2_IO2
+ //{PG_14, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK2_IO3
+ //{PH_2, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK2_IO0
+ //{PH_3, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK2_IO1
+ {NC, NP, 0}
+};
+#endif
+
+//*** USB ***
+
+#ifdef HAL_PCD_MODULE_ENABLED
+WEAK const PinMap PinMap_USB_OTG_FS[] = {
+ //{PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_FS)}, // USB_OTG_FS_SOF
+ {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
+ {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG1_FS)}, // USB_OTG_FS_ID
+ {PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_FS)}, // USB_OTG_FS_DM
+ {PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_FS)}, // USB_OTG_FS_DP
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_PCD_MODULE_ENABLED
+WEAK const PinMap PinMap_USB_OTG_HS[] = {
+#ifdef USE_USB_HS_IN_FS
+ {PA_4, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG2_FS)}, // USB_OTG_HS_SOF
+ {PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG2_FS)}, // USB_OTG_HS_ID
+ //{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS
+ {PB_14, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG2_FS)}, // USB_OTG_HS_DM
+ {PB_15, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG2_FS)}, // USB_OTG_HS_DP
+#else
+ //{PA_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D0
+ //{PA_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_CK
+ //{PB_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D1
+ //{PB_1, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D2
+ //{PB_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D7
+ //{PB_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D3
+ //{PB_11, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D4
+ //{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D5
+ //{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D6
+ //{PC_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_STP
+ //{PC_2, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_DIR
+ //{PC_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_NXT
+ //{PH_4, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_NXT
+ //{PI_11, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_DIR
+#endif /* USE_USB_HS_IN_FS */
+ {NC, NP, 0}
+};
+#endif
+
+//*** SD ***
+
+#ifdef HAL_SD_MODULE_ENABLED
+WEAK const PinMap PinMap_SD[] = {
+ //{PA_0, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_SDIO2)}, // SDMMC2_CMD
+ //{PB_3, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SDIO2)}, // SDMMC2_D2
+ //{PB_4, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SDIO2)}, // SDMMC2_D3
+ {PB_8, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SDIO1)}, // SDMMC1_CKIN
+ //{PB_8, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO1)}, // SDMMC1_D4
+ //{PB_8, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SDIO2)}, // SDMMC2_D4
+ //{PB_9, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SDIO1)}, // SDMMC1_CDIR
+ //{PB_9, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO1)}, // SDMMC1_D5
+ //{PB_9, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SDIO2)}, // SDMMC2_D5
+ //{PB_14, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SDIO2)}, // SDMMC2_D0
+ //{PB_15, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_SDIO2)}, // SDMMC2_D1
+ //{PC_1, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_SDIO2)}, // SDMMC2_CK
+ //{PC_6, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SDIO1)}, // SDMMC1_D0DIR
+ //{PC_6, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO1)}, // SDMMC1_D6
+ //{PC_6, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SDIO2)}, // SDMMC2_D6
+ //{PC_7, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SDIO1)}, // SDMMC1_D123DIR
+ //{PC_7, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO1)}, // SDMMC1_D7
+ //{PC_7, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SDIO2)}, // SDMMC2_D7
+ {PC_8, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO1)}, // SDMMC1_D0
+ {PC_9, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO1)}, // SDMMC1_D1
+ {PC_10, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO1)}, // SDMMC1_D2
+ {PC_11, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO1)}, // SDMMC1_D3
+ {PC_12, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO1)}, // SDMMC1_CK
+ {PD_2, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO1)}, // SDMMC1_CMD
+ //{PD_6, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF11_SDIO2)}, // SDMMC2_CK
+ //{PD_7, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF11_SDIO2)}, // SDMMC2_CMD
+ //{PG_11, SDMMC2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_SDIO2)}, // SDMMC2_D2
+ {NC, NP, 0}
+};
+#endif
diff --git a/variants/DAISY_SEED/PinNamesVar.h b/variants/DAISY_SEED/PinNamesVar.h
new file mode 100644
index 0000000000..ba04c2bf63
--- /dev/null
+++ b/variants/DAISY_SEED/PinNamesVar.h
@@ -0,0 +1,52 @@
+/* SYS_WKUP */
+#ifdef PWR_WAKEUP_PIN1
+ SYS_WKUP1 = PA_0, /* SYS_WKUP0 */
+#endif
+#ifdef PWR_WAKEUP_PIN2
+ SYS_WKUP2 = PA_2, /* SYS_WKUP1 */
+#endif
+#ifdef PWR_WAKEUP_PIN3
+ SYS_WKUP3 = PC_13, /* SYS_WKUP2 */
+#endif
+#ifdef PWR_WAKEUP_PIN4
+ SYS_WKUP4 = PI_8, /* SYS_WKUP3 */
+#endif
+#ifdef PWR_WAKEUP_PIN5
+ SYS_WKUP5 = PI_11, /* SYS_WKUP4 */
+#endif
+#ifdef PWR_WAKEUP_PIN6
+ SYS_WKUP6 = PC_1, /* SYS_WKUP5 */
+#endif
+#ifdef PWR_WAKEUP_PIN7
+ SYS_WKUP7 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN8
+ SYS_WKUP8 = NC,
+#endif
+/* USB */
+#ifdef USBCON
+ //USB_OTG_FS_SOF = PA_8,
+ USB_OTG_FS_VBUS = PA_9,
+ USB_OTG_FS_ID = PA_10,
+ USB_OTG_FS_DM = PA_11,
+ USB_OTG_FS_DP = PA_12,
+ //USB_OTG_HS_ULPI_D0 = PA_3,
+ USB_OTG_HS_SOF = PA_4,
+ //USB_OTG_HS_ULPI_CK = PA_5,
+ //USB_OTG_HS_ULPI_D1 = PB_0,
+ //USB_OTG_HS_ULPI_D2 = PB_1,
+ //USB_OTG_HS_ULPI_D7 = PB_5,
+ //USB_OTG_HS_ULPI_D3 = PB_10,
+ //USB_OTG_HS_ULPI_D4 = PB_11,
+ USB_OTG_HS_ID = PB_12,
+ //USB_OTG_HS_ULPI_D5 = PB_12,
+ //USB_OTG_HS_ULPI_D6 = PB_13,
+ //USB_OTG_HS_VBUS = PB_13,
+ USB_OTG_HS_DM = PB_14,
+ USB_OTG_HS_DP = PB_15,
+ //USB_OTG_HS_ULPI_STP = PC_0,
+ //USB_OTG_HS_ULPI_DIR = PC_2,
+ //USB_OTG_HS_ULPI_NXT = PC_3,
+ //USB_OTG_HS_ULPI_NXT = PH_4,
+ //USB_OTG_HS_ULPI_DIR = PI_11,
+#endif
diff --git a/variants/DAISY_SEED/ldscript.ld b/variants/DAISY_SEED/ldscript.ld
new file mode 100644
index 0000000000..686d104015
--- /dev/null
+++ b/variants/DAISY_SEED/ldscript.ld
@@ -0,0 +1,226 @@
+/*
+******************************************************************************
+**
+** File : LinkerScript.ld
+**
+** Author : Auto-generated by STM32CubeIDE
+**
+** Abstract : Linker script for Daisy Seed Board embedding STM32H750IBKx Device from STM32H7 series
+** 128Kbytes FLASH
+** 128Kbytes DTCMRAM
+** 64Kbytes ITCMRAM
+** 512Kbytes RAM_D1
+** 288Kbytes RAM_D2
+** 64Kbytes RAM_D3
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Distribution: The file is distributed as is without any warranty
+** of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** © COPYRIGHT(c) 2019 STMicroelectronics
+**
+** Redistribution and use in source and binary forms, with or without modification,
+** are permitted provided that the following conditions are met:
+** 1. Redistributions of source code must retain the above copyright notice,
+** this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright notice,
+** this list of conditions and the following disclaimer in the documentation
+** and/or other materials provided with the distribution.
+** 3. Neither the name of STMicroelectronics nor the names of its contributors
+** may be used to endorse or promote products derived from this software
+** without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x24080000; /* end of "RAM_D1" Ram type memory */
+
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Memories definition */
+MEMORY
+{
+ DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
+ ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K
+ RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K
+ RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K
+ RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K
+ FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K
+ SDRAM (xrw) : ORIGIN = 0xC0000000, LENGTH = 64M
+ QSPIFLASH (xr) : ORIGIN = 0x90000000, LENGTH = 8M
+}
+
+/* Sections */
+SECTIONS
+{
+ /* The startup code into "FLASH" Rom type memory */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data into "FLASH" Rom type memory */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data into "FLASH" Rom type memory */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : {
+ . = ALIGN(4);
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM : {
+ . = ALIGN(4);
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ . = ALIGN(4);
+ } >FLASH
+
+ .preinit_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ .init_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ .fini_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ /* Used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections into "RAM_D1" Ram type memory */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+
+ } >RAM_D1 AT> FLASH
+
+ /* Uninitialized data section into "RAM_D1" Ram type memory */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss section */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM_D1
+
+ /* User_heap_stack section, used to check that there is enough "RAM_D1" Ram type memory left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(8);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(8);
+ } >RAM_D1
+
+ /* Uninitialized data section called "SDRAM_BSS" */
+ /* Variables, etc. must be explicitly placed here */
+ /* can be assigned by using: */
+ /* int variable __attribute__((section(".sdram_bss"))) foo; */
+ .sdram_bss (NOLOAD) :
+ {
+ . = ALIGN(4);
+ _ssdram_bss = .;
+ PROVIDE(__sdram_bss_start = _ssdram_bss);
+ *(.sdram_bss)
+ *(.sdram_bss*)
+ . = ALIGN(4);
+ _esdram_bss = .;
+ PROVIDE(__sdram_bss_end = _esdram_bss);
+ } >SDRAM
+
+ /* Remove information from the compiler libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/variants/DAISY_SEED/variant.cpp b/variants/DAISY_SEED/variant.cpp
new file mode 100644
index 0000000000..c7462a5070
--- /dev/null
+++ b/variants/DAISY_SEED/variant.cpp
@@ -0,0 +1,178 @@
+#include "pins_arduino.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Pin number
+const PinName digitalPin[] = {
+ /* Right Side: */
+ PB_12, // D0
+ PC_11, // D1
+ PC_10, // D2
+ PC_9, // D3
+ PC_8, // D4
+ PD_2, // D5
+ PC_12, // D6
+ PG_10, // D7
+ PG_11, // D8
+ PB_4, // D9
+ PB_5, // D10
+ PB_8, // D11
+ PB_9, // D12
+ PB_6, // D13
+ PB_7, // D14
+ // NC, AUDIO IN L
+ // NC, AUDIO IN R
+ // NC, AUDIO OUT L
+ // NC, AUDIO OUT R
+ // NC, AGND
+ /* Left Side: */
+ // NC, 3v3A Out
+ PC_0, // D15/A0
+ PA_3, // D16/A1
+ PB_1, // D17/A2
+ PA_7, // D18/A3
+ PA_6, // D19/A4
+ PC_1, // D20/A5
+ PC_4, // D21/A6
+ PA_5, // D22/A7
+ PA_4, // D23/A8
+ PA_1, // D24/A9
+ PA_0, // D25/A10
+ PD_11, // D26
+ PG_9, // D27
+ PA_2, // D28/A11
+ PB_14, // D29
+ PB_15, // D30
+ // NC, 3v3D Out
+ // NC, VIN
+ // NC, DGND
+ PC_7 // LED_BUILTIN
+};
+
+const uint32_t analogInputPin[] = {
+ 15, // A0
+ 16, // A1
+ 17, // A2
+ 18, // A3
+ 19, // A4
+ 20, // A5
+ 21, // A6
+ 22, // A7
+ 23, // A8
+ 24, // A9
+ 25, // A10
+ 28 // A11
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+// ----------------------------------------------------------------------------
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief System Clock Configuration
+ * @param None
+ * @retval None
+ */
+WEAK void SystemClock_Config(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct = {};
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
+ RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {};
+
+ /* Supply configuration update enable */
+ HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);
+ /* Configure the main internal regulator output voltage */
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0); // 480MHz
+
+ while (!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
+ /* Macro to configure the PLL clock source */
+ __HAL_RCC_PLL_PLLSOURCE_CONFIG(RCC_PLLSOURCE_HSE);
+ /* Initializes the CPU, AHB and APB busses clocks */
+ RCC_OscInitStruct.OscillatorType
+ = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+ RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ RCC_OscInitStruct.PLL.PLLM = 4;
+ RCC_OscInitStruct.PLL.PLLN = 200; // 400MHz Mode
+ //RCC_OscInitStruct.PLL.PLLN = 240; // 480MHz Mode
+ RCC_OscInitStruct.PLL.PLLP = 2;
+ RCC_OscInitStruct.PLL.PLLQ = 5;
+ RCC_OscInitStruct.PLL.PLLR = 2;
+ RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
+ RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
+ RCC_OscInitStruct.PLL.PLLFRACN = 0;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ Error_Handler();
+ }
+ /* Initializes the CPU, AHB and APB busses clocks */
+ RCC_ClkInitStruct.ClockType
+ = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1
+ | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1 | RCC_CLOCKTYPE_D1PCLK1;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
+ RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
+ RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
+
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
+ Error_Handler();
+ }
+ PeriphClkInitStruct.PeriphClockSelection
+ = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SPI1
+ | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SDMMC
+ | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_I2C1
+ | RCC_PERIPHCLK_USB | RCC_PERIPHCLK_QSPI | RCC_PERIPHCLK_FMC;
+ // PLL 2
+ PeriphClkInitStruct.PLL2.PLL2M = 4;
+ // PeriphClkInitStruct.PLL2.PLL2N = 115; // Max Freq @ 3v3 (overclocked SDRAM)
+ PeriphClkInitStruct.PLL2.PLL2N = 100; // 100Mhz -> FMC
+ PeriphClkInitStruct.PLL2.PLL2P = 8; // 57.5
+ PeriphClkInitStruct.PLL2.PLL2Q = 10; // 46
+ PeriphClkInitStruct.PLL2.PLL2R = 2; // 115Mhz
+ PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2VCIRANGE_2;
+ PeriphClkInitStruct.PLL2.PLL2VCOSEL = RCC_PLL2VCOWIDE;
+ PeriphClkInitStruct.PLL2.PLL2FRACN = 0;
+ // PLL 3
+ PeriphClkInitStruct.PLL3.PLL3M = 6;
+ PeriphClkInitStruct.PLL3.PLL3N = 295;
+ PeriphClkInitStruct.PLL3.PLL3P = 64; // 12.29Mhz
+ PeriphClkInitStruct.PLL3.PLL3Q = 4;
+ PeriphClkInitStruct.PLL3.PLL3R = 32; // 24.xMhz
+ PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_1;
+ PeriphClkInitStruct.PLL3.PLL3VCOSEL = RCC_PLL3VCOWIDE;
+ PeriphClkInitStruct.PLL3.PLL3FRACN = 0;
+ PeriphClkInitStruct.FmcClockSelection = RCC_FMCCLKSOURCE_PLL2;
+ PeriphClkInitStruct.QspiClockSelection = RCC_QSPICLKSOURCE_D1HCLK;
+ PeriphClkInitStruct.SdmmcClockSelection = RCC_SDMMCCLKSOURCE_PLL;
+ PeriphClkInitStruct.Sai1ClockSelection = RCC_SAI1CLKSOURCE_PLL3;
+ PeriphClkInitStruct.Sai23ClockSelection = RCC_SAI23CLKSOURCE_PLL3;
+ PeriphClkInitStruct.Spi123ClockSelection = RCC_SPI123CLKSOURCE_PLL2;
+ PeriphClkInitStruct.Usart234578ClockSelection
+ = RCC_USART234578CLKSOURCE_D2PCLK1;
+ PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2;
+ PeriphClkInitStruct.I2c123ClockSelection = RCC_I2C123CLKSOURCE_D2PCLK1;
+ PeriphClkInitStruct.I2c4ClockSelection = RCC_I2C4CLKSOURCE_PLL3;
+ PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
+ PeriphClkInitStruct.AdcClockSelection = RCC_ADCCLKSOURCE_PLL3;
+ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
+ Error_Handler();
+ }
+ /* Enable USB Voltage detector */
+ HAL_PWREx_EnableUSBVoltageDetector();
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/variants/DAISY_SEED/variant.h b/variants/DAISY_SEED/variant.h
new file mode 100644
index 0000000000..645f347dde
--- /dev/null
+++ b/variants/DAISY_SEED/variant.h
@@ -0,0 +1,114 @@
+#ifndef _VARIANT_ARDUINO_STM32_
+#define _VARIANT_ARDUINO_STM32_
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+/*----------------------------------------------------------------------------
+ * Pins
+ *----------------------------------------------------------------------------*/
+#define PB12 0
+#define PC11 1
+#define PC10 2
+#define PC9 3
+#define PC8 4
+#define PD2 5
+#define PC12 6
+#define PG10 7
+#define PG11 8
+#define PB4 9
+#define PB5 10
+#define PB8 11
+#define PB9 12
+#define PB6 13
+#define PB7 14
+#define PC0 A0
+#define PA3 A1
+#define PB1 A2
+#define PA7 A3
+#define PA6 A4
+#define PC1 A5
+#define PC4 A6
+#define PA5 A7
+#define PA4 A8
+#define PA1 A9
+#define PA0 A10
+#define PD11 26
+#define PG9 27
+#define PA2 A11
+#define PB14 29
+#define PB15 30
+#define PC7 31 // LED_BUILTIN
+
+// This must be a literal
+#define NUM_DIGITAL_PINS 32
+// This must be a literal
+#define NUM_ANALOG_INPUTS 12
+
+// On-board LED pin number
+#define LED_BUILTIN PC7
+#define LED_RED LED_BUILTIN
+
+// SPI Definitions
+#define PIN_SPI_SS PG10
+#define PIN_SPI_MOSI PB5
+#define PIN_SPI_MISO PB4
+#define PIN_SPI_SCK PG11
+
+// I2C Definitions
+#define PIN_WIRE_SDA PB9
+#define PIN_WIRE_SCL PB8
+
+// I2C timing definitions (optional), avoid time spent to compute if defined
+#define I2C_TIMING_SM 0x30E0628A
+#define I2C_TIMING_FM 0x20D01132
+#define I2C_TIMING_FMP 0x1080091A
+
+// Timer Definitions
+// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
+#define TIMER_TONE TIM6
+#define TIMER_SERVO TIM7
+
+// UART Definitions
+#define SERIAL_UART_INSTANCE 1
+
+// Serial pin used for console
+// Required by Firmata
+#define PIN_SERIAL_RX PB7
+#define PIN_SERIAL_TX PB6
+
+// HSE is 16MHz on Daisy Seed.
+#define HSE_VALUE 16000000
+
+/* Extra HAL modules */
+#define HAL_DAC_MODULE_ENABLED
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+/*----------------------------------------------------------------------------
+ * Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ // These serial port names are intended to allow libraries and architecture-neutral
+ // sketches to automatically default to the correct port name for a particular type
+ // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+ // the first hardware serial port whose RX/TX pins are not dedicated to another use.
+ //
+ // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
+ //
+ // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
+ //
+ // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
+ //
+ // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
+ //
+ // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
+ // pins are NOT connected to anything by default.
+ #define SERIAL_PORT_MONITOR Serial
+ #define SERIAL_PORT_HARDWARE Serial
+#endif
+
+#endif /* _VARIANT_ARDUINO_STM32_ */