system(L5) update STM32L5xx HAL Drivers to v1.0.5

Included in STM32CubeL5 FW v1.5.0

Signed-off-by: Frederic Pillon <frederic.pillon@st.com>

Author: fpistm

system/Drivers/STM32L5xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h

@@ -5,16 +5,16 @@
   * @brief   STM32 assert template file.
   *          This file should be copied to the application folder and renamed
   *          to stm32_assert.h.
+  *
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -54,4 +54,3 @@ void assert_failed(uint8_t *file, uint32_t line);
 #endif /* STM32_ASSERT_H */
 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L5xx_HAL_Driver/Inc/stm32_assert_template.h

@@ -4,16 +4,16 @@
   * @author  MCD Application Team
   * @brief   This file contains all the functions prototypes for the HAL
   *          module driver.
+  *
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -700,4 +700,3 @@ HAL_StatusTypeDef HAL_SYSCFG_GetConfigAttributes(uint32_t Item, uint32_t *pAttri
 
 #endif /* STM32L5xx_HAL_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L5xx_HAL_Driver/Inc/stm32l5xx_hal.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -100,7 +99,7 @@ typedef enum
 typedef struct __COMP_HandleTypeDef
 #else
 typedef struct
-#endif
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
 {
   COMP_TypeDef       *Instance;       /*!< Register base address    */
   COMP_InitTypeDef   Init;            /*!< COMP required parameters */
@@ -289,7 +288,7 @@ typedef  void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer
                                                     } while(0)
 #else
 #define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
-#endif
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
 
 /**
   * @brief Clear COMP error code (set it to no error code "HAL_COMP_ERROR_NONE").
@@ -713,7 +712,7 @@ void              HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp);
   * @{
   */
 HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp);
-uint32_t          HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp);
+uint32_t          HAL_COMP_GetOutputLevel(const COMP_HandleTypeDef *hcomp);
 /* Callback in interrupt mode */
 void              HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
 /**
@@ -724,8 +723,8 @@ void              HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
 /** @addtogroup COMP_Exported_Functions_Group4
   * @{
   */
-HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
-uint32_t              HAL_COMP_GetError(COMP_HandleTypeDef *hcomp);
+HAL_COMP_StateTypeDef HAL_COMP_GetState(const COMP_HandleTypeDef *hcomp);
+uint32_t              HAL_COMP_GetError(const COMP_HandleTypeDef *hcomp);
 /**
   * @}
   */
@@ -747,5 +746,3 @@ uint32_t              HAL_COMP_GetError(COMP_HandleTypeDef *hcomp);
 #endif
 
 #endif /* STM32L5xx_HAL_COMP_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L5xx_HAL_Driver/Inc/stm32l5xx_hal_adc.h

@@ -5,16 +5,16 @@
   * @brief   HAL configuration template file.
   *          This file should be copied to the application folder and renamed
   *          to stm32l5xx_hal_conf.h.
+  *
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -436,4 +436,3 @@ void assert_failed(uint8_t *file, uint32_t line);
 #endif /* STM32L5xx_HAL_CONF_H */
 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L5xx_HAL_Driver/Inc/stm32l5xx_hal_adc_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -152,7 +151,7 @@ typedef struct
   * @{
   */
 #define  MPU_ACCESS_NOT_SHAREABLE        0U
-#define  MPU_ACCESS_OUTER_SHAREABLE      1U
+#define  MPU_ACCESS_OUTER_SHAREABLE      2U
 #define  MPU_ACCESS_INNER_SHAREABLE      3U
 /**
   * @}
@@ -373,4 +372,3 @@ void HAL_MPU_ConfigMemoryAttributes_NS(MPU_Attributes_InitTypeDef *MPU_Attribute
 #endif /* STM32L5xx_HAL_CORTEX_H */
 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L5xx_HAL_Driver/Inc/stm32l5xx_hal_comp.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -60,19 +59,22 @@ typedef struct
 {
   uint8_t DefaultPolynomialUse;       /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used.
                                             If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default
-                                            X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1.
+                                            X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 +
+                                            X^4 + X^2+ X +1.
                                             In that case, there is no need to set GeneratingPolynomial field.
-                                            If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set. */
+                                            If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and
+                                            CRCLength fields must be set. */
 
   uint8_t DefaultInitValueUse;        /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used.
                                            If set to DEFAULT_INIT_VALUE_ENABLE, resort to default
-                                           0xFFFFFFFF value. In that case, there is no need to set InitValue field.
-                                           If otherwise set to DEFAULT_INIT_VALUE_DISABLE,  InitValue field must be set. */
+                                           0xFFFFFFFF value. In that case, there is no need to set InitValue field. If
+                                           otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set. */
 
   uint32_t GeneratingPolynomial;      /*!< Set CRC generating polynomial as a 7, 8, 16 or 32-bit long value for a polynomial degree
-                                           respectively equal to 7, 8, 16 or 32. This field is written in normal representation,
-                                           e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
-                                           No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE.   */
+                                           respectively equal to 7, 8, 16 or 32. This field is written in normal,
+                                           representation e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1
+                                           is written 0x65. No need to specify it if DefaultPolynomialUse is set to
+                                            DEFAULT_POLYNOMIAL_ENABLE.   */
 
   uint32_t CRCLength;                 /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length.
                                            Value can be either one of
@@ -87,14 +89,18 @@ typedef struct
   uint32_t InputDataInversionMode;    /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode.
                                            Can be either one of the following values
                                            @arg @ref CRC_INPUTDATA_INVERSION_NONE       no input data inversion
-                                           @arg @ref CRC_INPUTDATA_INVERSION_BYTE       byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2
-                                           @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD   halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C
-                                           @arg @ref CRC_INPUTDATA_INVERSION_WORD       word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */
+                                           @arg @ref CRC_INPUTDATA_INVERSION_BYTE       byte-wise inversion, 0x1A2B3C4D
+                                           becomes 0x58D43CB2
+                                           @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD   halfword-wise inversion,
+                                           0x1A2B3C4D becomes 0xD458B23C
+                                           @arg @ref CRC_INPUTDATA_INVERSION_WORD       word-wise inversion, 0x1A2B3C4D
+                                           becomes 0xB23CD458 */
 
   uint32_t OutputDataInversionMode;   /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode.
                                             Can be either
                                             @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE   no CRC inversion,
-                                            @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE    CRC 0x11223344 is converted into 0x22CC4488 */
+                                            @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE    CRC 0x11223344 is converted
+                                             into 0x22CC4488 */
 } CRC_InitTypeDef;
 
 /**
@@ -112,12 +118,16 @@ typedef struct
 
   uint32_t InputDataFormat;                /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format.
                                             Can be either
-                                            @arg @ref CRC_INPUTDATA_FORMAT_BYTES       input data is a stream of bytes (8-bit data)
-                                            @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS   input data is a stream of half-words (16-bit data)
-                                            @arg @ref CRC_INPUTDATA_FORMAT_WORDS       input data is a stream of words (32-bit data)
-
-                                           Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error
-                                           must occur if InputBufferFormat is not one of the three values listed above  */
+                                            @arg @ref CRC_INPUTDATA_FORMAT_BYTES       input data is a stream of bytes
+                                            (8-bit data)
+                                            @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS   input data is a stream of
+                                            half-words (16-bit data)
+                                            @arg @ref CRC_INPUTDATA_FORMAT_WORDS       input data is a stream of words
+                                            (32-bit data)
+
+                                          Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization
+                                          error must occur if InputBufferFormat is not one of the three values listed
+                                          above  */
 } CRC_HandleTypeDef;
 /**
   * @}
@@ -199,15 +209,6 @@ typedef struct
   * @}
   */
 
-/** @defgroup CRC_Aliases CRC API aliases
-  * @{
-  */
-#define HAL_CRC_Input_Data_Reverse   HAL_CRCEx_Input_Data_Reverse    /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility  */
-#define HAL_CRC_Output_Data_Reverse  HAL_CRCEx_Output_Data_Reverse   /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */
-/**
-  * @}
-  */
-
 /**
   * @}
   */
@@ -339,5 +340,3 @@ HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
 #endif
 
 #endif /* STM32L5xx_HAL_CRC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L5xx_HAL_Driver/Inc/stm32l5xx_hal_conf_template.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -149,5 +148,3 @@ HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_
 #endif
 
 #endif /* STM32L5xx_HAL_CRC_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L5xx_HAL_Driver/Inc/stm32l5xx_hal_cortex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -107,7 +106,7 @@ typedef enum
 typedef struct __CRYP_HandleTypeDef
 #else
 typedef struct
-#endif
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
 {
   AES_TypeDef                       *Instance;        /*!< AES Register base address */
 
@@ -644,5 +643,3 @@ uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp);
 #endif
 
 #endif /* STM32L5xx_HAL_CRYP_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

system/Drivers/STM32L5xx_HAL_Driver/Inc/stm32l5xx_hal_crc.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -129,5 +128,3 @@ void  HAL_CRYPEx_DisableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp);
 #endif
 
 #endif /* STM32L5xx_HAL_CRYP_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/