system(C0) add STM32C0xx HAL Drivers to v1.0.1

Included in STM32CubeC0 FW 1.0.1

Signed-off-by: Frederic Pillon <frederic.pillon@st.com>

Author: fpistm

system/Drivers/STM32C0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h

@@ -0,0 +1,53 @@
+/**
+  ******************************************************************************
+  * @file    stm32_assert.h
+  * @author  MCD Application Team
+  * @brief   STM32 assert template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32_assert.h.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32_ASSERT_H
+#define STM32_ASSERT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Includes ------------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for functions parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t *file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32_ASSERT_H */

system/Drivers/STM32C0xx_HAL_Driver/Inc/stm32_assert_template.h

@@ -0,0 +1,185 @@
+/**
+  ******************************************************************************
+  * @file    stm32c0xx_hal_adc_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of ADC HAL extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32C0xx_HAL_ADC_EX_H
+#define STM32C0xx_HAL_ADC_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32c0xx_hal_def.h"
+
+/** @addtogroup STM32C0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ADCEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Types ADC Extended Exported Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADCEx_Exported_Constants ADC Extended Exported Constants
+  * @{
+  */
+
+/** @defgroup ADC_HAL_EC_GROUPS  ADC instance - Groups
+  * @{
+  */
+#define ADC_REGULAR_GROUP                  (LL_ADC_GROUP_REGULAR)           /*!< ADC group regular (available on all STM32 devices) */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @defgroup ADCEx_Private_Macro_internal_HAL_driver ADC Extended Private Macros
+  * @{
+  */
+/* Macro reserved for internal HAL driver usage, not intended to be used in   */
+/* code of final user.                                                        */
+
+/**
+  * @brief Check whether or not ADC is independent.
+  * @param __HANDLE__ ADC handle.
+  * @note  When multimode feature is not available, the macro always returns SET.
+  * @retval SET (ADC is independent) or RESET (ADC is not).
+  */
+#define ADC_IS_INDEPENDENT(__HANDLE__)   (SET)
+
+
+/**
+  * @brief Calibration factor size verification (7 bits maximum).
+  * @param __CALIBRATION_FACTOR__ Calibration factor value.
+  * @retval SET (__CALIBRATION_FACTOR__ is within the authorized size) or RESET (__CALIBRATION_FACTOR__ is too large)
+  */
+#define IS_ADC_CALFACT(__CALIBRATION_FACTOR__) ((__CALIBRATION_FACTOR__) <= (0x7FU))
+
+/**
+  * @brief Verify the ADC oversampling ratio.
+  * @param __RATIO__ programmed ADC oversampling ratio.
+  * @retval SET (__RATIO__ is a valid value) or RESET (__RATIO__ is invalid)
+  */
+#define IS_ADC_OVERSAMPLING_RATIO(__RATIO__)      (((__RATIO__) == ADC_OVERSAMPLING_RATIO_2   ) || \
+                                                   ((__RATIO__) == ADC_OVERSAMPLING_RATIO_4   ) || \
+                                                   ((__RATIO__) == ADC_OVERSAMPLING_RATIO_8   ) || \
+                                                   ((__RATIO__) == ADC_OVERSAMPLING_RATIO_16  ) || \
+                                                   ((__RATIO__) == ADC_OVERSAMPLING_RATIO_32  ) || \
+                                                   ((__RATIO__) == ADC_OVERSAMPLING_RATIO_64  ) || \
+                                                   ((__RATIO__) == ADC_OVERSAMPLING_RATIO_128 ) || \
+                                                   ((__RATIO__) == ADC_OVERSAMPLING_RATIO_256 ))
+
+/**
+  * @brief Verify the ADC oversampling shift.
+  * @param __SHIFT__ programmed ADC oversampling shift.
+  * @retval SET (__SHIFT__ is a valid value) or RESET (__SHIFT__ is invalid)
+  */
+#define IS_ADC_RIGHT_BIT_SHIFT(__SHIFT__)        (((__SHIFT__) == ADC_RIGHTBITSHIFT_NONE) || \
+                                                  ((__SHIFT__) == ADC_RIGHTBITSHIFT_1   ) || \
+                                                  ((__SHIFT__) == ADC_RIGHTBITSHIFT_2   ) || \
+                                                  ((__SHIFT__) == ADC_RIGHTBITSHIFT_3   ) || \
+                                                  ((__SHIFT__) == ADC_RIGHTBITSHIFT_4   ) || \
+                                                  ((__SHIFT__) == ADC_RIGHTBITSHIFT_5   ) || \
+                                                  ((__SHIFT__) == ADC_RIGHTBITSHIFT_6   ) || \
+                                                  ((__SHIFT__) == ADC_RIGHTBITSHIFT_7   ) || \
+                                                  ((__SHIFT__) == ADC_RIGHTBITSHIFT_8   ))
+
+/**
+  * @brief Verify the ADC oversampling triggered mode.
+  * @param __MODE__ programmed ADC oversampling triggered mode.
+  * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+  */
+#define IS_ADC_TRIGGERED_OVERSAMPLING_MODE(__MODE__) (((__MODE__) == ADC_TRIGGEREDMODE_SINGLE_TRIGGER) || \
+                                                      ((__MODE__) == ADC_TRIGGEREDMODE_MULTI_TRIGGER) )
+
+
+/**
+  * @}
+  */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup ADCEx_Exported_Functions_Group1
+  * @{
+  */
+/* IO operation functions *****************************************************/
+
+/* ADC calibration */
+HAL_StatusTypeDef       HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc);
+uint32_t                HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc);
+HAL_StatusTypeDef       HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t CalibrationFactor);
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */
+void                    HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc);
+void                    HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc);
+void                    HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc);
+void                    HAL_ADCEx_ChannelConfigReadyCallback(ADC_HandleTypeDef *hadc);
+
+/**
+  * @}
+  */
+
+/** @addtogroup ADCEx_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef       HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32C0xx_HAL_ADC_EX_H */