Skip to content

Commit 4e9e0b3

Browse files
fpistmfpistm
committed
chore(wba): update variant after script update
Signed-off-by: Frederic Pillon <frederic.pillon@st.com>
1 parent 27ef26c commit 4e9e0b3

File tree

11 files changed

+563
-5
lines changed

11 files changed

+563
-5
lines changed

‎variants/STM32WBAxx/WBA50KGU/PeripheralPins.c

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -12,7 +12,7 @@
1212
*/
1313
/*
1414
* Automatically generated from STM32WBA50KGUx.xml
15-
* CubeMX DB release 6.0.120
15+
* CubeMX DB release 6.0.130
1616
*/
1717
#if !defined(CUSTOM_PERIPHERAL_PINS)
1818
#include "Arduino.h"

‎variants/STM32WBAxx/WBA52C(E-G)U_WBA54C(E-G)U_WBA55H(E-G)F/PeripheralPins.c

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -14,7 +14,7 @@
1414
* Automatically generated from STM32WBA52CEUx.xml, STM32WBA52CGUx.xml
1515
* STM32WBA54CEUx.xml, STM32WBA54CGUx.xml
1616
* STM32WBA55HEFx.xml, STM32WBA55HGFx.xml
17-
* CubeMX DB release 6.0.120
17+
* CubeMX DB release 6.0.130
1818
*/
1919
#if !defined(CUSTOM_PERIPHERAL_PINS)
2020
#include "Arduino.h"

‎variants/STM32WBAxx/WBA52K(E-G)U_WBA54K(E-G)U/PeripheralPins.c

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -13,7 +13,7 @@
1313
/*
1414
* Automatically generated from STM32WBA52KEUx.xml, STM32WBA52KGUx.xml
1515
* STM32WBA54KEUx.xml, STM32WBA54KGUx.xml
16-
* CubeMX DB release 6.0.120
16+
* CubeMX DB release 6.0.130
1717
*/
1818
#if !defined(CUSTOM_PERIPHERAL_PINS)
1919
#include "Arduino.h"

‎variants/STM32WBAxx/WBA55C(E-G)U/PeripheralPins.c

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -12,7 +12,7 @@
1212
*/
1313
/*
1414
* Automatically generated from STM32WBA55CEUx.xml, STM32WBA55CGUx.xml
15-
* CubeMX DB release 6.0.120
15+
* CubeMX DB release 6.0.130
1616
*/
1717
#if !defined(CUSTOM_PERIPHERAL_PINS)
1818
#include "Arduino.h"

‎variants/STM32WBAxx/WBA55U(E-G)I/PeripheralPins.c

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -12,7 +12,7 @@
1212
*/
1313
/*
1414
* Automatically generated from STM32WBA55UEIx.xml, STM32WBA55UGIx.xml
15-
* CubeMX DB release 6.0.120
15+
* CubeMX DB release 6.0.130
1616
*/
1717
#if !defined(CUSTOM_PERIPHERAL_PINS)
1818
#include "Arduino.h"

‎variants/STM32WBAxx/WBA5MJGH/PeripheralPins.c

Lines changed: 216 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,216 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
/*
14+
* Automatically generated from STM32WBA5MJGHx.xml
15+
* CubeMX DB release 6.0.130
16+
*/
17+
#if !defined(CUSTOM_PERIPHERAL_PINS)
18+
#include "Arduino.h"
19+
#include "PeripheralPins.h"
20+
21+
/* =====
22+
* Notes:
23+
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other
24+
* HW peripheral instances. You can use them the same way as any other "normal"
25+
* pin (i.e. analogWrite(PA7_ALT1, 128);).
26+
*
27+
* - Commented lines are alternative possibilities which are not used per default.
28+
* If you change them, you will have to know what you do
29+
* =====
30+
*/
31+
32+
//*** ADC ***
33+
34+
#ifdef HAL_ADC_MODULE_ENABLED
35+
WEAK const PinMap PinMap_ADC[] = {
36+
{PA_0, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC4_IN9
37+
{PA_1, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC4_IN8
38+
{PA_2, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC4_IN7
39+
{PA_3, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC4_IN6
40+
{PA_4, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC4_IN5
41+
{PA_5, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC4_IN4
42+
{PA_6, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC4_IN3
43+
{PA_7, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC4_IN2
44+
{PA_8, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC4_IN1
45+
{PB_9, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC4_IN10
46+
{NC, NP, 0}
47+
};
48+
#endif
49+
50+
//*** No DAC ***
51+
52+
//*** I2C ***
53+
54+
#ifdef HAL_I2C_MODULE_ENABLED
55+
WEAK const PinMap PinMap_I2C_SDA[] = {
56+
{PA_7, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
57+
{PB_1, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
58+
{PB_1_ALT1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C3)},
59+
{PB_3, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
60+
{NC, NP, 0}
61+
};
62+
#endif
63+
64+
#ifdef HAL_I2C_MODULE_ENABLED
65+
WEAK const PinMap PinMap_I2C_SCL[] = {
66+
{PA_6, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
67+
{PA_15, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
68+
{PB_2, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
69+
{PB_2_ALT1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C3)},
70+
{NC, NP, 0}
71+
};
72+
#endif
73+
74+
//*** No I3C ***
75+
76+
//*** TIM ***
77+
78+
#ifdef HAL_TIM_MODULE_ENABLED
79+
WEAK const PinMap PinMap_TIM[] = {
80+
{PA_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
81+
{PA_0_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
82+
{PA_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
83+
{PA_1_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
84+
{PA_1_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
85+
{PA_2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
86+
{PA_2_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
87+
{PA_3, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)}, // TIM16_CH1N
88+
{PA_4, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
89+
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
90+
{PA_6, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
91+
{PA_7, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
92+
{PA_8, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
93+
{PA_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
94+
{PA_10, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
95+
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
96+
{PA_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
97+
{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
98+
{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
99+
{PB_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
100+
{PB_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
101+
{PB_3_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 1)}, // TIM17_CH1N
102+
{PB_4, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
103+
{PB_4_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
104+
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
105+
{PB_6, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
106+
{PB_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 1)}, // TIM1_CH4N
107+
{PB_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
108+
{PB_8_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)}, // TIM16_CH1N
109+
{PB_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
110+
{PB_9_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
111+
{PB_9_ALT2, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
112+
{PB_12, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
113+
{PB_13, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
114+
{PB_14, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
115+
{NC, NP, 0}
116+
};
117+
#endif
118+
119+
//*** UART ***
120+
121+
#ifdef HAL_UART_MODULE_ENABLED
122+
WEAK const PinMap PinMap_UART_TX[] = {
123+
{PA_2, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
124+
{PA_12, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)},
125+
{PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)},
126+
{PB_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)},
127+
{PB_5, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
128+
{PB_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
129+
{PB_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
130+
{PB_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
131+
{NC, NP, 0}
132+
};
133+
#endif
134+
135+
#ifdef HAL_UART_MODULE_ENABLED
136+
WEAK const PinMap PinMap_UART_RX[] = {
137+
{PA_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
138+
{PA_8, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
139+
{PA_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
140+
{PA_11, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)},
141+
{PB_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)},
142+
{PB_8, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)},
143+
{NC, NP, 0}
144+
};
145+
#endif
146+
147+
#ifdef HAL_UART_MODULE_ENABLED
148+
WEAK const PinMap PinMap_UART_RTS[] = {
149+
{PA_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
150+
{PA_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
151+
{PA_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
152+
{PA_9, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
153+
{PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)},
154+
{PB_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)},
155+
{PB_9, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
156+
{NC, NP, 0}
157+
};
158+
#endif
159+
160+
#ifdef HAL_UART_MODULE_ENABLED
161+
WEAK const PinMap PinMap_UART_CTS[] = {
162+
{PA_0, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
163+
{PA_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
164+
{PA_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
165+
{PB_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)},
166+
{PB_15, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
167+
{PB_15_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_USART2)},
168+
{NC, NP, 0}
169+
};
170+
#endif
171+
172+
//*** SPI ***
173+
174+
#ifdef HAL_SPI_MODULE_ENABLED
175+
WEAK const PinMap PinMap_SPI_MOSI[] = {
176+
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
177+
{PB_8, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
178+
{NC, NP, 0}
179+
};
180+
#endif
181+
182+
#ifdef HAL_SPI_MODULE_ENABLED
183+
WEAK const PinMap PinMap_SPI_MISO[] = {
184+
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
185+
{PB_9, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
186+
{NC, NP, 0}
187+
};
188+
#endif
189+
190+
#ifdef HAL_SPI_MODULE_ENABLED
191+
WEAK const PinMap PinMap_SPI_SCLK[] = {
192+
{PA_0, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
193+
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
194+
{NC, NP, 0}
195+
};
196+
#endif
197+
198+
#ifdef HAL_SPI_MODULE_ENABLED
199+
WEAK const PinMap PinMap_SPI_SSEL[] = {
200+
{PA_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
201+
{PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
202+
{NC, NP, 0}
203+
};
204+
#endif
205+
206+
//*** No CAN ***
207+
208+
//*** No ETHERNET ***
209+
210+
//*** No QUADSPI ***
211+
212+
//*** No USB ***
213+
214+
//*** No SD ***
215+
216+
#endif /* !CUSTOM_PERIPHERAL_PINS */

‎variants/STM32WBAxx/WBA5MJGH/PinNamesVar.h

Lines changed: 65 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,65 @@
1+
/* Alternate pin name */
2+
PA_0_ALT1 = PA_0 | ALT1,
3+
PA_1_ALT1 = PA_1 | ALT1,
4+
PA_1_ALT2 = PA_1 | ALT2,
5+
PA_2_ALT1 = PA_2 | ALT1,
6+
PB_1_ALT1 = PB_1 | ALT1,
7+
PB_2_ALT1 = PB_2 | ALT1,
8+
PB_3_ALT1 = PB_3 | ALT1,
9+
PB_4_ALT1 = PB_4 | ALT1,
10+
PB_8_ALT1 = PB_8 | ALT1,
11+
PB_9_ALT1 = PB_9 | ALT1,
12+
PB_9_ALT2 = PB_9 | ALT2,
13+
PB_15_ALT1 = PB_15 | ALT1,
14+
15+
/* SYS_WKUP */
16+
#ifdef PWR_WAKEUP_PIN1
17+
SYS_WKUP1 = PA_0,
18+
#endif
19+
#ifdef PWR_WAKEUP_PIN1
20+
SYS_WKUP1_1 = PB_2,
21+
#endif
22+
#ifdef PWR_WAKEUP_PIN2
23+
SYS_WKUP2 = PA_4,
24+
#endif
25+
#ifdef PWR_WAKEUP_PIN2
26+
SYS_WKUP2_1 = PC_13,
27+
#endif
28+
#ifdef PWR_WAKEUP_PIN3
29+
SYS_WKUP3 = PA_1,
30+
#endif
31+
#ifdef PWR_WAKEUP_PIN3
32+
SYS_WKUP3_1 = PB_6,
33+
#endif
34+
#ifdef PWR_WAKEUP_PIN4
35+
SYS_WKUP4 = PA_2,
36+
#endif
37+
#ifdef PWR_WAKEUP_PIN4
38+
SYS_WKUP4_1 = PB_1,
39+
#endif
40+
#ifdef PWR_WAKEUP_PIN5
41+
SYS_WKUP5 = PA_3,
42+
#endif
43+
#ifdef PWR_WAKEUP_PIN5
44+
SYS_WKUP5_1 = PB_7,
45+
#endif
46+
#ifdef PWR_WAKEUP_PIN6
47+
SYS_WKUP6 = PA_5,
48+
#endif
49+
#ifdef PWR_WAKEUP_PIN6
50+
SYS_WKUP6_1 = PA_12,
51+
#endif
52+
#ifdef PWR_WAKEUP_PIN7
53+
SYS_WKUP7 = PB_14,
54+
#endif
55+
#ifdef PWR_WAKEUP_PIN7
56+
SYS_WKUP7_1 = PA_6,
57+
#endif
58+
#ifdef PWR_WAKEUP_PIN8
59+
SYS_WKUP8 = PA_7,
60+
#endif
61+
#ifdef PWR_WAKEUP_PIN8
62+
SYS_WKUP8_1 = PB_9,
63+
#endif
64+
65+
/* No USB */

‎variants/STM32WBAxx/WBA5MJGH/boards_entry.txt

Lines changed: 14 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,14 @@
1+
# This file help to add generic board entry.
2+
# upload.maximum_size and product_line have to be verified
3+
# and changed if needed.
4+
# See: https://github.com/stm32duino/Arduino_Core_STM32/wiki/Add-a-new-variant-%28board%29
5+
6+
# Generic WBA5MJGHx
7+
GenWBA.menu.pnum.GENERIC_WBA5MJGHX=Generic WBA5MJGHx
8+
GenWBA.menu.pnum.GENERIC_WBA5MJGHX.upload.maximum_size=1048576
9+
GenWBA.menu.pnum.GENERIC_WBA5MJGHX.upload.maximum_data_size=131072
10+
GenWBA.menu.pnum.GENERIC_WBA5MJGHX.build.board=GENERIC_WBA5MJGHX
11+
GenWBA.menu.pnum.GENERIC_WBA5MJGHX.build.product_line=
12+
GenWBA.menu.pnum.GENERIC_WBA5MJGHX.build.variant=STM32WBAxx/WBA5MJGH
13+
GenWBA.menu.pnum.GENERIC_WBA5MJGHX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WBAxx/STM32WBA55.svd
14+

‎variants/STM32WBAxx/WBA5MJGH/generic_clock.c

Lines changed: 27 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,27 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
#if defined(ARDUINO_GENERIC_WBA5MJGHX)
14+
#include "pins_arduino.h"
15+
16+
/**
17+
* @brief System Clock Configuration
18+
* @param None
19+
* @retval None
20+
*/
21+
WEAK void SystemClock_Config(void)
22+
{
23+
/* SystemClock_Config can be generated by STM32CubeMX */
24+
#warning "SystemClock_Config() is empty. Default clock at reset is used."
25+
}
26+
27+
#endif /* ARDUINO_GENERIC_* */

0 commit comments

Comments
 (0)