Skip to content

Commit 1d057a6

Browse files
fpistmfpistm
committed
Introduce SD pin mapping
Signed-off-by: Frederic.Pillon <frederic.pillon@st.com>
1 parent 85fd492 commit 1d057a6

File tree

6 files changed

+107
-65
lines changed

6 files changed

+107
-65
lines changed

‎cores/arduino/stm32/PeripheralPins.h

Lines changed: 2 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -76,5 +76,7 @@ extern const PinMap PinMap_USB[];
7676
extern const PinMap PinMap_USB_OTG_FS[];
7777
extern const PinMap PinMap_USB_OTG_HS[];
7878

79+
//*** SD ***
80+
extern const PinMap PinMap_SD[];
7981
#endif
8082

‎variants/BLACK_F407XX/PeripheralPins.c

Lines changed: 22 additions & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -3,8 +3,10 @@
33
* Copyright (c) 2019, STMicroelectronics
44
* All rights reserved.
55
*
6-
* Redistribution and use in source and binary forms, with or without
7-
* modification, are permitted provided that the following conditions are met:
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
810
*
911
* 1. Redistributions of source code must retain the above copyright notice,
1012
* this list of conditions and the following disclaimer.
@@ -436,3 +438,21 @@ WEAK const PinMap PinMap_USB_OTG_HS[] = {
436438
{NC, NP, 0}
437439
};
438440
#endif
441+
442+
//*** SD ***
443+
444+
#ifdef HAL_SD_MODULE_ENABLED
445+
WEAK const PinMap PinMap_SD[] = {
446+
// {PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
447+
// {PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
448+
// {PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
449+
// {PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
450+
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
451+
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
452+
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
453+
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
454+
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
455+
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
456+
{NC, NP, 0}
457+
};
458+
#endif

‎variants/BLUE_F407VE_Mini/PeripheralPins.c

Lines changed: 22 additions & 21 deletions
Original file line numberDiff line numberDiff line change
@@ -3,28 +3,11 @@
33
* Copyright (c) 2019, STMicroelectronics
44
* All rights reserved.
55
*
6-
* Redistribution and use in source and binary forms, with or without
7-
* modification, are permitted provided that the following conditions are met:
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
810
*
9-
* 1. Redistributions of source code must retain the above copyright notice,
10-
* this list of conditions and the following disclaimer.
11-
* 2. Redistributions in binary form must reproduce the above copyright notice,
12-
* this list of conditions and the following disclaimer in the documentation
13-
* and/or other materials provided with the distribution.
14-
* 3. Neither the name of STMicroelectronics nor the names of its contributors
15-
* may be used to endorse or promote products derived from this software
16-
* without specific prior written permission.
17-
*
18-
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19-
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20-
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
21-
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
22-
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23-
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24-
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
25-
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26-
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27-
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
2811
*******************************************************************************
2912
* Automatically generated from STM32F407V(E-G)Tx.xml
3013
*/
@@ -392,3 +375,21 @@ WEAK const PinMap PinMap_USB_OTG_HS[] = {
392375
{NC, NP, 0}
393376
};
394377
#endif
378+
379+
//*** SD ***
380+
381+
#ifdef HAL_SD_MODULE_ENABLED
382+
WEAK const PinMap PinMap_SD[] = {
383+
// {PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
384+
// {PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
385+
// {PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
386+
// {PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
387+
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
388+
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
389+
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
390+
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
391+
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
392+
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
393+
{NC, NP, 0}
394+
};
395+
#endif

‎variants/DISCO_F746NG/PeripheralPins.c

Lines changed: 22 additions & 21 deletions
Original file line numberDiff line numberDiff line change
@@ -3,28 +3,11 @@
33
* Copyright (c) 2019, STMicroelectronics
44
* All rights reserved.
55
*
6-
* Redistribution and use in source and binary forms, with or without
7-
* modification, are permitted provided that the following conditions are met:
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
810
*
9-
* 1. Redistributions of source code must retain the above copyright notice,
10-
* this list of conditions and the following disclaimer.
11-
* 2. Redistributions in binary form must reproduce the above copyright notice,
12-
* this list of conditions and the following disclaimer in the documentation
13-
* and/or other materials provided with the distribution.
14-
* 3. Neither the name of STMicroelectronics nor the names of its contributors
15-
* may be used to endorse or promote products derived from this software
16-
* without specific prior written permission.
17-
*
18-
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19-
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20-
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
21-
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
22-
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23-
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24-
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
25-
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26-
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27-
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
2811
*******************************************************************************
2912
* Automatically generated from STM32F746NGHx.xml
3013
*/
@@ -524,3 +507,21 @@ WEAK const PinMap PinMap_USB_OTG_HS[] = {
524507
{NC, NP, 0}
525508
};
526509
#endif
510+
511+
//*** SD ***
512+
513+
#ifdef HAL_SD_MODULE_ENABLED
514+
WEAK const PinMap PinMap_SD[] = {
515+
// {PB_8, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D4
516+
// {PB_9, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D5
517+
// {PC_6, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D6
518+
// {PC_7, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D7
519+
{PC_8, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D0
520+
{PC_9, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D1
521+
{PC_10, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D2
522+
{PC_11, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDMMC1)}, // SDMMC1_D3
523+
{PC_12, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDMMC1)}, // SDMMC1_CK
524+
{PD_2, SDMMC1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDMMC1)}, // SDMMC1_CMD
525+
{NC, NP, 0}
526+
};
527+
#endif

‎variants/PRNTR_F407_V1/PeripheralPins.c

Lines changed: 22 additions & 21 deletions
Original file line numberDiff line numberDiff line change
@@ -3,28 +3,11 @@
33
* Copyright (c) 2019, STMicroelectronics
44
* All rights reserved.
55
*
6-
* Redistribution and use in source and binary forms, with or without
7-
* modification, are permitted provided that the following conditions are met:
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
810
*
9-
* 1. Redistributions of source code must retain the above copyright notice,
10-
* this list of conditions and the following disclaimer.
11-
* 2. Redistributions in binary form must reproduce the above copyright notice,
12-
* this list of conditions and the following disclaimer in the documentation
13-
* and/or other materials provided with the distribution.
14-
* 3. Neither the name of STMicroelectronics nor the names of its contributors
15-
* may be used to endorse or promote products derived from this software
16-
* without specific prior written permission.
17-
*
18-
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19-
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20-
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
21-
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
22-
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23-
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24-
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
25-
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26-
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27-
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
2811
*******************************************************************************
2912
* Automatically generated from STM32F407V(E-G)Tx.xml
3013
*/
@@ -393,3 +376,21 @@ WEAK const PinMap PinMap_USB_OTG_HS[] = {
393376
{NC, NP, 0}
394377
};
395378
#endif
379+
380+
//*** SD ***
381+
382+
#ifdef HAL_SD_MODULE_ENABLED
383+
WEAK const PinMap PinMap_SD[] = {
384+
// {PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
385+
// {PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
386+
// {PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
387+
// {PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
388+
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
389+
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
390+
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
391+
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
392+
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
393+
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
394+
{NC, NP, 0}
395+
};
396+
#endif

‎variants/ST3DP001_EVAL/PeripheralPins.c

Lines changed: 17 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -255,3 +255,20 @@ WEAK const PinMap PinMap_USB_OTG_FS[] = {
255255
#endif
256256

257257
//*** No USB_OTG_HS ***
258+
//*** SD ***
259+
260+
#ifdef HAL_SD_MODULE_ENABLED
261+
WEAK const PinMap PinMap_SD[] = {
262+
// {PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
263+
// {PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
264+
// {PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
265+
// {PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
266+
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
267+
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
268+
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
269+
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
270+
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
271+
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
272+
{NC, NP, 0}
273+
};
274+
#endif

0 commit comments

Comments
 (0)