commented out NUM_ANALOG_FIRST to use analogInputPin array

Author: Stephen Hensley

variants/DAISY_SEED/PinNamesVar.h

@@ -25,28 +25,28 @@
 #endif
 /* USB */
 #ifdef USBCON
-  USB_OTG_FS_SOF = PA_8,
+  //USB_OTG_FS_SOF = PA_8,
   USB_OTG_FS_VBUS = PA_9,
   USB_OTG_FS_ID = PA_10,
   USB_OTG_FS_DM = PA_11,
   USB_OTG_FS_DP = PA_12,
-  USB_OTG_HS_ULPI_D0 = PA_3,
+  //USB_OTG_HS_ULPI_D0 = PA_3,
   USB_OTG_HS_SOF = PA_4,
-  USB_OTG_HS_ULPI_CK = PA_5,
-  USB_OTG_HS_ULPI_D1 = PB_0,
-  USB_OTG_HS_ULPI_D2 = PB_1,
-  USB_OTG_HS_ULPI_D7 = PB_5,
-  USB_OTG_HS_ULPI_D3 = PB_10,
-  USB_OTG_HS_ULPI_D4 = PB_11,
+  //USB_OTG_HS_ULPI_CK = PA_5,
+  //USB_OTG_HS_ULPI_D1 = PB_0,
+  //USB_OTG_HS_ULPI_D2 = PB_1,
+  //USB_OTG_HS_ULPI_D7 = PB_5,
+  //USB_OTG_HS_ULPI_D3 = PB_10,
+  //USB_OTG_HS_ULPI_D4 = PB_11,
   USB_OTG_HS_ID = PB_12,
-  USB_OTG_HS_ULPI_D5 = PB_12,
-  USB_OTG_HS_ULPI_D6 = PB_13,
-  USB_OTG_HS_VBUS = PB_13,
+  //USB_OTG_HS_ULPI_D5 = PB_12,
+  //USB_OTG_HS_ULPI_D6 = PB_13,
+  //USB_OTG_HS_VBUS = PB_13,
   USB_OTG_HS_DM = PB_14,
   USB_OTG_HS_DP = PB_15,
-  USB_OTG_HS_ULPI_STP = PC_0,
+  //USB_OTG_HS_ULPI_STP = PC_0,
   //USB_OTG_HS_ULPI_DIR = PC_2,
   //USB_OTG_HS_ULPI_NXT = PC_3,
-  USB_OTG_HS_ULPI_NXT = PH_4,
-  USB_OTG_HS_ULPI_DIR = PI_11,
+  //USB_OTG_HS_ULPI_NXT = PH_4,
+  //USB_OTG_HS_ULPI_DIR = PI_11,
 #endif

variants/DAISY_SEED/variant.h

@@ -46,7 +46,7 @@ extern "C" {
 #define NUM_DIGITAL_PINS        32
 // This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
 #define NUM_ANALOG_INPUTS       12
-#define NUM_ANALOG_FIRST        15
+//#define NUM_ANALOG_FIRST        15 // commented out to use analogInputPin[]
 
 // On-board LED pin number
 #define LED_BUILTIN             PC7