fixes from en

Author: smellai

AsciiDoc_sample/AsciiDoc_Dictionary/AsciiDoc_Template-Dictionary.adoc

@@ -1,6 +1,5 @@
-// ARDUINO PYGMENTS HIGHLIGHT ATTRIBUTE   ►►►►► ALWAYS INCLUDE IN YOUR FILE ◄◄◄◄◄
-:source-highlighter: pygments
-:pygments-style: arduino
+
+
 
 // This is a documentation file for authors and editors of the Arduino Manutius content platform.
 // Below you can find a list of all the possible page elements with the corresponding
@@ -144,12 +143,12 @@ for (int 1; i<=99; i++) {
 
 This is a block image with a URL
 [%hardbreaks]
-image::http://store.arduino.cc/bmz_cache/b/babe9d3f8563ea2f170dd55539f06310.image.538x354.jpg[]
+image::https://store-cdn.arduino.cc/uni/catalog/product/cache/1/image/1040x660/604a3538c15e081937dbfbd20aa60aad/A/0/A000066_featured_2.jpg[]
 
 
 This is an image saved in the attachments folder with a caption
 [%hardbreaks]
-image::attachments/ArduinoUno_R3_Front_450px.jpg[caption="", title="A beautiful Arduino UNO"]
+image::https://www.arduino.cc/reference/en/AsciiDoc_sample/AsciiDoc_Dictionary/attachments/ArduinoUno_R3_Front_450px.jpg[caption="", title="A beautiful Arduino UNO"]
 
 
 '''
@@ -158,23 +157,23 @@ image::attachments/ArduinoUno_R3_Front_450px.jpg[caption="", title="A beautiful
 
 This is a pretty embed of code from Gist
 ++++
-<script src="http://gist.github.com/mojavelinux/5333524.js">
+<script src="https://gist.github.com/mojavelinux/5333524.js">
 </script>
 ++++
 
 {empty} +
 
 And this is another of a video from YouTube
 ++++
-<iframe width="100%" height="315" src="http://www.youtube-nocookie.com/embed/UoBUXOOdLXY?rel=0&amp;controls=0&amp;showinfo=0" frameborder="0" allowfullscreen></iframe>
+<iframe width="100%" height="315" src="https://www.youtube.com/watch?v=6cRFf4qkcTw?rel=0&amp;controls=0&amp;showinfo=0" frameborder="0" allowfullscreen></iframe>
 ++++
 // HINT: Please remember to set the iframe width to 100% to have the video responsive on all our platforms
 
 {empty} +
 
 And here some slides from Sideshare, yay!
 ++++
-<iframe src="http://www.slideshare.net/slideshow/embed_code/4430242" width="100%" height="355" frameborder="0" marginwidth="0" marginheight="0" scrolling="no" style="border:1px solid #CCC; border-width:1px; margin-bottom:5px; max-width: 100%;" allowfullscreen> </iframe> <div style="margin-bottom:5px"> <strong> <a href="//www.slideshare.net/damellis/introduction-to-arduino-4430242" title="Introduction to Arduino" target="_blank">Introduction to Arduino</a> </strong> from <strong><a href="//www.slideshare.net/damellis" target="_blank">David Mellis</a></strong> </div>
+<iframe src="https://www.slideshare.net/slideshow/embed_code/4430242" width="100%" height="355" frameborder="0" marginwidth="0" marginheight="0" scrolling="no" style="border:1px solid #CCC; border-width:1px; margin-bottom:5px; max-width: 100%;" allowfullscreen> </iframe> <div style="margin-bottom:5px"> <strong> <a href="//www.slideshare.net/damellis/introduction-to-arduino-4430242" title="Introduction to Arduino" target="_blank">Introduction to Arduino</a> </strong> from <strong><a href="//www.slideshare.net/damellis" target="_blank">David Mellis</a></strong> </div>
 ++++
 // HINT: Please remember to set the iframe width to 100% to have the slide show responsive on all our platforms
 

AsciiDoc_sample/Reference_Terms/AsciiDoc_Template-Parent_Of_Entities.adoc

@@ -8,9 +8,8 @@ subCategories: [ "Subcategory Name" ]
 // categories: Pick between Structure, Variable or Function
 // The subcategory within the ones available in the index ("Digital I/O", "Arithmetic Operators")
 
-// ARDUINO PYGMENTS HIGHLIGHT ATTRIBUTE   ►►►►► ALWAYS INCLUDE IN YOUR FILE ◄◄◄◄◄
-:source-highlighter: pygments
-:pygments-style: arduino
+
+
 
 
 // PAGE TITLE   ►►►►► THIS IS MANDATORY ◄◄◄◄◄

AsciiDoc_sample/Reference_Terms/AsciiDoc_Template-Single_Entity.adoc

@@ -10,9 +10,8 @@ subCategories: [ "Subcategory Name" ]
 // categories: Pick between Structure, Variable or Function
 // The subcategory within the ones available in the index ("Digital I/O", "Arithmetic Operators")
 
-// ARDUINO PYGMENTS HIGHLIGHT ATTRIBUTE   ►►►►► ALWAYS INCLUDE IN YOUR FILE ◄◄◄◄◄
-:source-highlighter: pygments
-:pygments-style: arduino
+
+
 
 
 // PAGE TITLE

Language/Functions/Advanced IO/noTone.adoc

@@ -6,10 +6,6 @@ subCategories: [ "Advanced I/O" ]
 aliases: [ /language/functions/advanced-io/noTone/ ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
-
-
 
 = noTone()
 

Language/Functions/Advanced IO/pulseIn.adoc

@@ -4,8 +4,7 @@ categories: [ "Functions" ]
 subCategories: [ "Advanced I/O" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
+
 
 
 

Language/Functions/Advanced IO/pulseInLong.adoc

@@ -0,0 +1,78 @@
+---
+title: pulseInLong()
+categories: [ "Functions" ]
+subCategories: [ "Advanced I/O" ]
+---
+
+
+
+
+
+= pulseInLong()
+
+
+// OVERVIEW SECTION STARTS
+[#overview]
+--
+
+[float]
+=== Description
+Reads a pulse (either HIGH or LOW) on a pin. For example, if value is HIGH, `pulseInLong()` waits for the pin to go `HIGH`, starts timing, then waits for the pin to go `LOW` and stops timing. Returns the length of the pulse in microseconds or 0 if no complete pulse was received within the timeout.
+
+The timing of this function has been determined empirically and will probably show errors in shorter pulses. Works on pulses from 10 microseconds to 3 minutes in length. Please also note that if the pin is already high when the function is called, it will wait for the pin to go LOW and then HIGH before it starts counting. This routine can be used only if interrupts are activated. Furthermore the highest resolution is obtained with large intervals.
+[%hardbreaks]
+
+
+[float]
+=== Syntax
+`pulseInLong(pin, value)`
+
+`pulseInLong(pin, value, timeout)`
+
+[float]
+=== Parameters
+`pin`: the number of the pin on which you want to read the pulse. (int)
+
+`value`: type of pulse to read: either link:../../../variables/constants/constants/[HIGH] or link:../../../variables/constants/constants/[LOW]. (int)
+
+`timeout` (optional): the number of microseconds to wait for the pulse to start; default is one second (unsigned long)
+[float]
+=== Returns
+the length of the pulse (in microseconds) or 0 if no pulse started before the timeout (unsigned long)
+
+--
+// OVERVIEW SECTION ENDS
+
+
+
+
+// HOW TO USE SECTION STARTS
+[#howtouse]
+--
+
+[float]
+=== Example Code
+// Describe what the example code is all about and add relevant code   ►►►►► THIS SECTION IS MANDATORY ◄◄◄◄◄
+The example calculated the time duration of a pulse on pin 7.
+
+[source,arduino]
+----
+int pin = 7;
+unsigned long duration;
+
+void setup() {
+  pinMode(pin, INPUT);
+}
+
+void loop() {
+  duration = pulseInLong(pin, HIGH);
+}
+----
+[%hardbreaks]
+
+[float]
+=== Notes and Warnings
+This function relies on micros() so cannot be used in link:../../interrupts/nointerrupts[noInterrupts()] context.
+
+--
+// HOW TO USE SECTION ENDS

Language/Functions/Advanced IO/shiftIn.adoc

@@ -4,8 +4,7 @@ categories: [ "Functions" ]
 subCategories: [ "Advanced I/O" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
+
 
 
 
@@ -22,7 +21,7 @@ Shifts in a byte of data one bit at a time. Starts from either the most (i.e. th
 
 If you're interfacing with a device that's clocked by rising edges, you'll need to make sure that the clock pin is low before the first call to `shiftIn()`, e.g. with a call to `digitalWrite(clockPin, LOW)`.
 
-Note: this is a software implementation; Arduino also provides an link:../SPI[SPI library] that uses the hardware implementation, which is faster but only works on specific pins.
+Note: this is a software implementation; Arduino also provides an link:https://www.arduino.cc/en/Reference/SPI[SPI library] that uses the hardware implementation, which is faster but only works on specific pins.
 [%hardbreaks]
 
 

Language/Functions/Advanced IO/shiftOut.adoc

@@ -4,11 +4,6 @@ categories: [ "Functions" ]
 subCategories: [ "Advanced I/O" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
-
-
-
 = shiftOut()
 
 
@@ -22,7 +17,7 @@ Shifts out a byte of data one bit at a time. Starts from either the most (i.e. t
 
 Note- if you're interfacing with a device that's clocked by rising edges, you'll need to make sure that the clock pin is low before the call to `shiftOut()`, e.g. with a call to `digitalWrite(clockPin, LOW)`.
 
-This is a software implementation; see also the link:../SPI[SPI library], which provides a hardware implementation that is faster but works only on specific pins.
+This is a software implementation; see also the linkhttps://www.arduino.cc/en/Reference/SPI[SPI library], which provides a hardware implementation that is faster but works only on specific pins.
 [%hardbreaks]
 
 
@@ -103,7 +98,7 @@ void loop() {
 
 [float]
 === Notes and Warnings
-The dataPin and clockPin must already be configured as outputs by a call to link:../digital-io/pinMode[pinMode()].
+The dataPin and clockPin must already be configured as outputs by a call to link:../../digital-io/pinmode[pinMode()].
 
 shiftOut is currently written to output 1 byte (8 bits) so it requires a two step operation to output values larger than 255.
 [source,arduino]

Language/Functions/Advanced IO/tone.adoc

@@ -4,8 +4,7 @@ categories: [ "Functions" ]
 subCategories: [ "Advanced I/O" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
+
 
 
 

Language/Functions/Analog IO/analogRead.adoc

@@ -4,8 +4,7 @@ categories: [ "Functions" ]
 subCategories: [ "Analog I/O" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
+
 
 
 = analogRead()
@@ -17,7 +16,7 @@ subCategories: [ "Analog I/O" ]
 
 [float]
 === Description
-Reads the value from the specified analog pin. The Arduino board contains a 6 channel (8 channels on the Mini and Nano, 16 on the Mega), 10-bit analog to digital converter. This means that it will map input voltages between 0 and 5 volts into integer values between 0 and 1023. This yields a resolution between readings of: 5 volts / 1024 units or, .0049 volts (4.9 mV) per unit. The input range and resolution can be changed using link:../analogReference[analogReference()]`.
+Reads the value from the specified analog pin. The Arduino board contains a 6 channel (8 channels on the Mini and Nano, 16 on the Mega), 10-bit analog to digital converter. This means that it will map input voltages between 0 and 5 volts into integer values between 0 and 1023. This yields a resolution between readings of: 5 volts / 1024 units or, .0049 volts (4.9 mV) per unit. The input range and resolution can be changed using link:../analogreference[analogReference()]`.
 
 It takes about 100 microseconds (0.0001 s) to read an analog input, so the maximum reading rate is about 10,000 times a second.
 [%hardbreaks]
@@ -86,7 +85,7 @@ If the analog input pin is not connected to anything, the value returned by anal
 === See also
 
 [role="language"]
-* #LANGUAGE# link:../../arduino-due-only/analogreadresolution[analogReadResolution()]
+* #LANGUAGE# link:../../zero-due-mkr-family/analogreadresolution[analogReadResolution()]
 * #LANGUAGE# https://www.arduino.cc/en/Tutorial/AnalogInputPins[Tutorial: Analog Input Pins]
 --
-// SEE ALSO SECTION ENDS
+// SEE ALSO SECTION ENDS

Language/Functions/Analog IO/analogReference.adoc

@@ -4,8 +4,7 @@ categories: [ "Functions" ]
 subCategories: [ "Analog I/O" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
+
 //
 
 

Language/Functions/Analog IO/analogWrite.adoc

@@ -4,8 +4,7 @@ categories: [ "Functions" ]
 subCategories: [ "Analog I/O" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
+
 
 
 
@@ -18,9 +17,9 @@ subCategories: [ "Analog I/O" ]
 
 [float]
 === Description
-Writes an analog value (http://arduino.cc/en/Tutorial/PWM[PWM wave]) to a pin. Can be used to light a LED at varying brightnesses or drive a motor at various speeds. After a call to `analogWrite()`, the pin will generate a steady square wave of the specified duty cycle until the next call to `analogWrite()` (or a call to `digitalRead()` or `digitalWrite()` on the same pin). The frequency of the PWM signal on most pins is approximately 490 Hz. On the Uno and similar boards, pins 5 and 6 have a frequency of approximately 980 Hz.
+Writes an analog value (http://arduino.cc/en/Tutorial/PWM[PWM wave]) to a pin. Can be used to light a LED at varying brightnesses or drive a motor at various speeds. After a call to `analogWrite()`, the pin will generate a steady square wave of the specified duty cycle until the next call to `analogWrite()` (or a call to `digitalRead()` or `digitalWrite()`) on the same pin. The frequency of the PWM signal on most pins is approximately 490 Hz. On the Uno and similar boards, pins 5 and 6 have a frequency of approximately 980 Hz.
 [%hardbreaks]
-On most Arduino boards (those with the ATmega168 or ATmega328), this function works on pins 3, 5, 6, 9, 10, and 11. On the Arduino Mega, it works on pins 2 - 13 and 44 - 46. Older Arduino boards with an ATmega8 only support `analogWrite()` on pins 9, 10, and 11.
+On most Arduino boards (those with the ATmega168 or ATmega328P), this function works on pins 3, 5, 6, 9, 10, and 11. On the Arduino Mega, it works on pins 2 - 13 and 44 - 46. Older Arduino boards with an ATmega8 only support `analogWrite()` on pins 9, 10, and 11.
 The Arduino DUE supports `analogWrite()` on pins 2 through 13, plus pins DAC0 and DAC1. Unlike the PWM pins, DAC0 and DAC1 are Digital to Analog converters, and act as true analog outputs.
 You do not need to call `pinMode()` to set the pin as an output before calling `analogWrite()`.
 The `analogWrite` function has nothing to do with the analog pins or the `analogRead` function.
@@ -93,7 +92,7 @@ The PWM outputs generated on pins 5 and 6 will have higher-than-expected duty cy
 === See also
 
 [role="language"]
-* #LANGUAGE# link:../../arduino-due-only/analogwriteresolution[analogWriteResolution()]
+* #LANGUAGE# link:../../zero-due-mkr-family/analogwriteresolution[analogWriteResolution()]
 
 [role="definition"]
 * #DEFINITION# http://arduino.cc/en/Tutorial/PWM[PWM^]

Language/Functions/Bits and Bytes/bit.adoc

@@ -4,8 +4,7 @@ categories: [ "Functions" ]
 subCategories: [ "Bits and Bytes" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
+
 
 
 

Language/Functions/Bits and Bytes/bitClear.adoc

@@ -4,8 +4,7 @@ categories: [ "Functions" ]
 subCategories: [ "Bits and Bytes" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
+
 
 
 

Language/Functions/Bits and Bytes/bitRead.adoc

@@ -4,8 +4,7 @@ categories: [ "Functions" ]
 subCategories: [ "Bits and Bytes" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
+
 
 
 

Language/Functions/Bits and Bytes/bitSet.adoc

@@ -4,8 +4,7 @@ categories: [ "Functions" ]
 subCategories: [ "Bits and Bytes" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
+
 
 
 

Language/Functions/Bits and Bytes/bitWrite.adoc

@@ -4,8 +4,7 @@ categories: [ "Functions" ]
 subCategories: [ "Bits and Bytes" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
+
 
 
 

Language/Functions/Bits and Bytes/highByte.adoc

@@ -4,8 +4,7 @@ categories: [ "Functions" ]
 subCategories: [ "Bits and Bytes" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
+
 
 
 

Language/Functions/Bits and Bytes/lowByte.adoc

@@ -4,8 +4,7 @@ categories: [ "Functions" ]
 subCategories: [ "Bits and Bytes" ]
 ---
 
-:source-highlighter: pygments
-:pygments-style: arduino
+