From 294a17ab8fbff91ac8eb9644a630d716d779d413 Mon Sep 17 00:00:00 2001 From: marqdevx Date: Mon, 16 May 2022 11:14:15 +0200 Subject: [PATCH 1/7] Add note: Pro Cloud Plan clarification --- .../boards/portenta-x8/tutorials/out-of-the-box/content.md | 1 + 1 file changed, 1 insertion(+) diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md index 7c762cf079..eb0823426b 100644 --- a/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md +++ b/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md @@ -53,6 +53,7 @@ Once it is connected, you should see the Wi-Fi status bullet in the bottom left ### Register the Factory on Foundries.io +***The integration with Foundries.io requires the Arduino Pro Cloud plan, contact us at [Arduino Pro Contact Inquires](https://www.arduino.cc/pro/contact-us), or learn more on the [Arduino Pro Page](https://www.arduino.cc/pro/hardware/product/portenta-x8)*** Go to [https://create.arduino.cc](https://create.arduino.cc) and click on portenta-X8 board manager, you will get prompted to set a new `Factory` name if you didn't have one before. You will not be able to be change the name later, so use one that you can remember and write easily. ![Arduino Cloud integration](assets/cloud-main.png) From a37e9297f02822e331c417daa3b524ad5a559032 Mon Sep 17 00:00:00 2001 From: marqdevx Date: Mon, 16 May 2022 11:23:17 +0200 Subject: [PATCH 2/7] Add Requirements section --- .../portenta-x8/tutorials/out-of-the-box/content.md | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md index eb0823426b..a2536f915f 100644 --- a/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md +++ b/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md @@ -8,6 +8,7 @@ tags: - Installation - OTA - Embedded Linux + - Arduino Pro Cloud author: 'Pablo Marquínez' hardware: - hardware/04.pro/boards/portenta-x8 @@ -18,6 +19,13 @@ software: - iot-cloud --- + +## Required Hardware and Software + +* [Portenta X8](https://store.arduino.cc/products/portenta-x8) board. +* Wi-Fi AP with Internet access. +* Arduino Pro Cloud Subscription plan. [Learn more about the Plan](https://www.arduino.cc/pro/hardware/product/portenta-x8). + ## Connecting to the Board Once the Portenta X8 is plugged in via USB, you can open your browser and go to http://192.168.7.1 if you use Windows and Linux or http://192.168.8.1 on MacOS. This web page is hosted on the Portenta X8, from this dashboard you will be able to: From 5840dd6ae649b30ce2c6a1ab20b55da9da7f6469 Mon Sep 17 00:00:00 2001 From: marqdevx Date: Mon, 16 May 2022 12:10:02 +0200 Subject: [PATCH 3/7] Remove plan wording for the Pro Subscritpion --- .../boards/portenta-x8/tutorials/out-of-the-box/content.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md index a2536f915f..ec7d14c258 100644 --- a/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md +++ b/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md @@ -24,7 +24,7 @@ software: * [Portenta X8](https://store.arduino.cc/products/portenta-x8) board. * Wi-Fi AP with Internet access. -* Arduino Pro Cloud Subscription plan. [Learn more about the Plan](https://www.arduino.cc/pro/hardware/product/portenta-x8). +* Arduino Pro Cloud Subscription. [Learn more about the Pro Cloud](https://www.arduino.cc/pro/hardware/product/portenta-x8). ## Connecting to the Board @@ -61,7 +61,7 @@ Once it is connected, you should see the Wi-Fi status bullet in the bottom left ### Register the Factory on Foundries.io -***The integration with Foundries.io requires the Arduino Pro Cloud plan, contact us at [Arduino Pro Contact Inquires](https://www.arduino.cc/pro/contact-us), or learn more on the [Arduino Pro Page](https://www.arduino.cc/pro/hardware/product/portenta-x8)*** +***The integration with Foundries.io requires the Arduino Pro Cloud Subscription, contact us at [Arduino Pro Contact Inquires](https://www.arduino.cc/pro/contact-us), or learn more on the [Arduino Pro Page](https://www.arduino.cc/pro/hardware/product/portenta-x8)*** Go to [https://create.arduino.cc](https://create.arduino.cc) and click on portenta-X8 board manager, you will get prompted to set a new `Factory` name if you didn't have one before. You will not be able to be change the name later, so use one that you can remember and write easily. ![Arduino Cloud integration](assets/cloud-main.png) From a6531c6974cd0c8c071e9c3c64971164cf65ae47 Mon Sep 17 00:00:00 2001 From: marqdevx Date: Mon, 16 May 2022 12:11:49 +0200 Subject: [PATCH 4/7] Add requirements: Arduino Pro subscription --- .../portenta-x8/tutorials/custom-container/content.md | 8 +++++--- .../portenta-x8/tutorials/image-flashing/content.md | 4 ++-- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/custom-container/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/custom-container/content.md index 69c8bdd281..72bb4ba26a 100644 --- a/content/hardware/04.pro/boards/portenta-x8/tutorials/custom-container/content.md +++ b/content/hardware/04.pro/boards/portenta-x8/tutorials/custom-container/content.md @@ -21,9 +21,11 @@ In this tutorial we will create a simple container that we can then upload to th ### Required Hardware and Software -- [Portenta X8](https://store.arduino.cc/portenta-x8) -- ADB -- USB-C cable (either USB-C to USB-A or USB-C to USB-C) +- [Portenta X8](https://store.arduino.cc/portenta-x8) +- ADB +- USB-C cable (either USB-C to USB-A or USB-C to USB-C) +- Arduino Pro Cloud Subscription. [Learn more about the Pro Cloud](https://www.arduino.cc/pro/hardware/product/portenta-x8). + ## Instructions diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/image-flashing/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/image-flashing/content.md index 70c6b23694..591aadb823 100644 --- a/content/hardware/04.pro/boards/portenta-x8/tutorials/image-flashing/content.md +++ b/content/hardware/04.pro/boards/portenta-x8/tutorials/image-flashing/content.md @@ -29,8 +29,8 @@ In this tutorial you will see how to manually flash your Portenta X8 with the im - Portenta X8 - Portenta Breakout Board - Arduino Create account -- Arduino Create Pro subscription -- Foundries.io account (linked with the Pro plan) +- Arduino Pro Cloud Subscription. [Learn more about the Pro Cloud](https://www.arduino.cc/pro/hardware/product/portenta-x8). +- Foundries.io account (linked with the Pro Cloud subscription) - FoundriesFactory® ([Check the Getting Started tutorial](https://docs.arduino.cc/tutorials/portenta-x8/out-of-the-box)) - 1 Device already attached to your factory ([Check the Getting Started tutorial](https://docs.arduino.cc/tutorials/portenta-x8/out-of-the-box)) From 7e2686e4e10964ef32da92166d34a82076683586 Mon Sep 17 00:00:00 2001 From: marqdevx Date: Mon, 16 May 2022 12:14:20 +0200 Subject: [PATCH 5/7] Add anchor and fix Inquires link wording Co-authored-by: per1234 --- .../boards/portenta-x8/tutorials/custom-container/content.md | 2 +- .../boards/portenta-x8/tutorials/image-flashing/content.md | 2 +- .../boards/portenta-x8/tutorials/out-of-the-box/content.md | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/custom-container/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/custom-container/content.md index 72bb4ba26a..80018b5ef1 100644 --- a/content/hardware/04.pro/boards/portenta-x8/tutorials/custom-container/content.md +++ b/content/hardware/04.pro/boards/portenta-x8/tutorials/custom-container/content.md @@ -24,7 +24,7 @@ In this tutorial we will create a simple container that we can then upload to th - [Portenta X8](https://store.arduino.cc/portenta-x8) - ADB - USB-C cable (either USB-C to USB-A or USB-C to USB-C) -- Arduino Pro Cloud Subscription. [Learn more about the Pro Cloud](https://www.arduino.cc/pro/hardware/product/portenta-x8). +- Arduino Pro Cloud Subscription. [Learn more about the Pro Cloud](https://www.arduino.cc/pro/hardware/product/portenta-x8#pro-cloud). ## Instructions diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/image-flashing/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/image-flashing/content.md index 591aadb823..7da0af3bf0 100644 --- a/content/hardware/04.pro/boards/portenta-x8/tutorials/image-flashing/content.md +++ b/content/hardware/04.pro/boards/portenta-x8/tutorials/image-flashing/content.md @@ -29,7 +29,7 @@ In this tutorial you will see how to manually flash your Portenta X8 with the im - Portenta X8 - Portenta Breakout Board - Arduino Create account -- Arduino Pro Cloud Subscription. [Learn more about the Pro Cloud](https://www.arduino.cc/pro/hardware/product/portenta-x8). +- Arduino Pro Cloud Subscription. [Learn more about the Pro Cloud](https://www.arduino.cc/pro/hardware/product/portenta-x8#pro-cloud). - Foundries.io account (linked with the Pro Cloud subscription) - FoundriesFactory® ([Check the Getting Started tutorial](https://docs.arduino.cc/tutorials/portenta-x8/out-of-the-box)) - 1 Device already attached to your factory ([Check the Getting Started tutorial](https://docs.arduino.cc/tutorials/portenta-x8/out-of-the-box)) diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md index ec7d14c258..5974311416 100644 --- a/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md +++ b/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md @@ -61,7 +61,7 @@ Once it is connected, you should see the Wi-Fi status bullet in the bottom left ### Register the Factory on Foundries.io -***The integration with Foundries.io requires the Arduino Pro Cloud Subscription, contact us at [Arduino Pro Contact Inquires](https://www.arduino.cc/pro/contact-us), or learn more on the [Arduino Pro Page](https://www.arduino.cc/pro/hardware/product/portenta-x8)*** +***The integration with Foundries.io requires the Arduino Pro Cloud Subscription, contact us at [Arduino Pro Inquires](https://www.arduino.cc/pro/contact-us), or learn more on the [Arduino Pro Page](https://www.arduino.cc/pro/hardware/product/portenta-x8#pro-cloud)*** Go to [https://create.arduino.cc](https://create.arduino.cc) and click on portenta-X8 board manager, you will get prompted to set a new `Factory` name if you didn't have one before. You will not be able to be change the name later, so use one that you can remember and write easily. ![Arduino Cloud integration](assets/cloud-main.png) From 41182b4d440d04e2ac281e5860286ce454705d82 Mon Sep 17 00:00:00 2001 From: marqdevx Date: Mon, 16 May 2022 12:16:08 +0200 Subject: [PATCH 6/7] Fix typo Co-authored-by: per1234 --- .../boards/portenta-x8/tutorials/out-of-the-box/content.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md index 5974311416..cd7cee50d6 100644 --- a/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md +++ b/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md @@ -61,7 +61,7 @@ Once it is connected, you should see the Wi-Fi status bullet in the bottom left ### Register the Factory on Foundries.io -***The integration with Foundries.io requires the Arduino Pro Cloud Subscription, contact us at [Arduino Pro Inquires](https://www.arduino.cc/pro/contact-us), or learn more on the [Arduino Pro Page](https://www.arduino.cc/pro/hardware/product/portenta-x8#pro-cloud)*** +***The integration with Foundries.io requires the Arduino Pro Cloud Subscription, contact us at [Arduino Pro Inquiries](https://www.arduino.cc/pro/contact-us), or learn more on the [Arduino Pro Page](https://www.arduino.cc/pro/hardware/product/portenta-x8#pro-cloud)*** Go to [https://create.arduino.cc](https://create.arduino.cc) and click on portenta-X8 board manager, you will get prompted to set a new `Factory` name if you didn't have one before. You will not be able to be change the name later, so use one that you can remember and write easily. ![Arduino Cloud integration](assets/cloud-main.png) From b9709875006fc38eb11b8f8d77e86873dd6091ec Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pablo=20Marqu=C3=ADnez=20Ferr=C3=A1ndiz?= Date: Mon, 16 May 2022 12:23:12 +0200 Subject: [PATCH 7/7] Update content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md Co-authored-by: per1234 --- .../boards/portenta-x8/tutorials/out-of-the-box/content.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md b/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md index cd7cee50d6..96ed7b0653 100644 --- a/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md +++ b/content/hardware/04.pro/boards/portenta-x8/tutorials/out-of-the-box/content.md @@ -24,7 +24,7 @@ software: * [Portenta X8](https://store.arduino.cc/products/portenta-x8) board. * Wi-Fi AP with Internet access. -* Arduino Pro Cloud Subscription. [Learn more about the Pro Cloud](https://www.arduino.cc/pro/hardware/product/portenta-x8). +* Arduino Pro Cloud Subscription. [Learn more about the Pro Cloud](https://www.arduino.cc/pro/hardware/product/portenta-x8#pro-cloud). ## Connecting to the Board