From d2863ac4090edb06a0a57d73701cd82a62554f1a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Karl=20S=C3=B6derby?= <35461661+karlsoderby@users.noreply.github.com> Date: Thu, 12 Sep 2024 09:18:48 +0200 Subject: [PATCH] Update TX/RX in NanoESP32 DS --- .../boards/nano-esp32/datasheet/datasheet.md | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/content/hardware/03.nano/boards/nano-esp32/datasheet/datasheet.md b/content/hardware/03.nano/boards/nano-esp32/datasheet/datasheet.md index 4b44e6ee42..2e2a204b7d 100644 --- a/content/hardware/03.nano/boards/nano-esp32/datasheet/datasheet.md +++ b/content/hardware/03.nano/boards/nano-esp32/datasheet/datasheet.md @@ -235,8 +235,8 @@ The SPI controller is by default assigned to the pins above. ### Universal Asynchronous Receiver/Transmitter (UART) -- D0 / TX -- D1 / RX +- D1 / TX +- D0 / RX The UART controller is by default assigned to the the pins above. @@ -343,8 +343,8 @@ The GPIOs on the Nano ESP32 can handle **source currents** up to **40 mA**, and | 11 | D2 | Digital | Digital pin 2 | | 12 | GND | Power | Ground | | 13 | RST | Internal | Reset | -| 14 | D1/RX | Digital | Digital pin 1 / Serial Receiver (RX) | -| 15 | D0/TX | Digital | Digital pin 0 / Serial Transmitter (TX) | +| 14 | D0/RX | Digital | Digital pin 1 / Serial Receiver (RX) | +| 15 | D1/TX | Digital | Digital pin 0 / Serial Transmitter (TX) | \*CIPO/COPI/CS replaces the MISO/MOSI/SS terminology. @@ -738,8 +738,8 @@ SDA 和 SCL 引脚可分配给大多数 GPIO，但其中一些引脚可能具有 ### 通用异步接收器/发射器 (UART) -- D0 / TX -- D1 / RX +- D1 / TX +- D0 / RX 默认情况下，UART 控制器分配给上述引脚。 @@ -846,8 +846,8 @@ Nano ESP32 上的 GPIO 可处理的**源电流**最高达**40 mA**，**灌电流 | 11 | D2 | 数字 | 数字引脚 2 | | 12 | GND | 电源 | 接地 | | 13 | RST | 内部 | 复位 | -| 14 | D1/RX | 数字 | 数字引脚 1 /串行接收器 (RX) | -| 15 | D0/TX | 数字 | 数字引脚 0 / 串行发射器 (TX) | +| 14 | D0/RX | 数字 | 数字引脚 1 /串行接收器 (RX) | +| 15 | D1/TX | 数字 | 数字引脚 0 / 串行发射器 (TX) | \*CIPO/COPI/CS 取代 MISO/MOSI/SS 术语。