Merge pull request #404 from arduino/sync/Kristoffers-changes

Retired products - links [MKC-208]

Author: kengdahl

content/retired/01.boards/arduino-101-619/assets/intel-curie-shield-compat-guide.pdf

@@ -9,7 +9,8 @@ source: "https://store.arduino.cc/arduino-101-619"
 
 ![The Arduino 101 board](./assets/ABX00005_featured_2.jpg)
 
-A learning and development board that delivers the performance and low-power consumption of the [Intel® Curie™](http://www.intel.com/content/dam/support/us/en/documents/boardsandkits/curie/intel-curie-module-datasheet.pdf) Module with the simplicity of Arduino at an entry-level price. It keeps the same robust form factor and peripheral list of the UNO with the addition of onboard Bluetooth® Low Energy capabilities and a 6-axis accelerometer/gyro to help you easily expand your creativity into the connected world. 
+
+A learning and development board that delivers the performance and low-power consumption of the [Intel® Curie™](/resources/datasheets/intel-curie-module-datasheet.pdf) Module with the simplicity of Arduino at an entry-level price. It keeps the same robust form factor and peripheral list of the UNO with the addition of onboard Bluetooth LE capabilities and a 6-axis accelerometer/gyro to help you easily expand your creativity into the connected world. 
 
 The module contains two tiny cores, an x86 (Quark) and a [32-bit ARC](https://en.wikipedia.org/wiki/ARC_(processor)) architecture core, both clocked at 32MHz. The Intel toolchain compiles your Arduino sketches optimally across both cores to accomplish the most demanding tasks. The Real-Time Operating Systems (RTOS) and framework developed by Intel is open sourced. See below under Firmware for the download link. The Arduino core communicates with the RTOS via static mailboxes to accomplish a predefined list of tasks (interface with PC using USB, program the sketch into flash, expose Bluetooth® Low Energy functionality to sketch, perform PWM). The RTOS for Intel Curie is still under development and new functions and features will be released in the near future.
 
@@ -25,7 +26,7 @@ In the [Getting Started section](https://www.arduino.cc/en/Guide/Arduino101), yo
 
 * On the Software [on the Arduino Forum](https://forum.arduino.cc/index.php?board=103.0)
 * On Projects [on the Arduino Forum](https://forum.arduino.cc/index.php?board=3.0)
-* On the Product itself through [our Customer Support](https://store.arduino.cc/index.php?main_page=contact_us&language=en)
+* On the Product itself through [our Customer Support](https://support.arduino.cc/hc)
 
 ## Documentation
 
@@ -47,11 +48,11 @@ The 101 has some features in common with both UNO (connectors, available periphe
 
 ### Compatibility guide
 
-Please check out the compatibility guide [here.](http://www.intel.com/content/www/us/en/support/boards-and-kits/intel-curie-modules/000023506.html)
+Please check out the compatibility guide [here.](/resources/datasheets/intel-curie-shield-compat-guide.pdf)
 
 ### Firmware
 
-Your 101 board might receive an update of the firmware from time to time. The Arduino Software (IDE) will incorporate the latest Firmware and an automated update procedure from the "Burn Bootloader" menu item. For people interested in compiling their own firmware, the source code and full details on how to use it are made available on the dedicated [Intel's Download Page](https://downloadcenter.intel.com/download/25832).
+Your 101 board might receive an update of the firmware from time to time. The Arduino Software (IDE) will incorporate the latest Firmware and an automated update procedure from the "Burn Bootloader" menu item. For people interested in compiling their own firmware, the source code and full details on how to use it are made available on [this Github Page](https://github.com/intel/CODK-A).
 
 ### Power
 
@@ -101,4 +102,4 @@ In addition, some pins have specialized functions:
 | Features                    | Bluetooth® Low Energy, 6-axis accelerometer/gyro |
 | Length                      | 68.6 mm                                 |
 | Width                       | 53.4 mm                                 |
-| Weight                      | 34 gr.                                  |
+| Weight                      | 34 gr.                                  |

content/retired/01.boards/arduino-101-619/content.md

@@ -3,13 +3,13 @@ title: "Arduino BT v1"
 source: "https://arduino.cc/en/Main/ArduinoBoardBluetoothNew"
 ---
 
-## Arduino BT (Bluetooth)
+## Arduino BT (Bluetooth®)
 
 ![](assets/ArduinoBT400.jpg)
 
 ### Overview
 
-The Arduino BT (Bluetooth) is a microcontroller board based on the ATmega168 ([datasheet](http://www.atmel.com/dyn/resources/prod%5Fdocuments/doc2545.pdf)) and the Bluegiga WT11 Bluetooth® module ([details](http://www.bluegiga.com/wt11-1) and [datasheet](http://www.bluegiga.com/files/bluegiga/Pub%20files/WT11%5Fdatasheet.pdf) \[pdf\]). It has 14 digital input/output pins (of which 6 can be used as PWM outputs and one can be used to reset the WT11 module), 6 analog inputs, a 16 MHz crystal oscillator, screw terminals for power, an ICSP header, and a reset button. It contains everything needed to support the microcontroller and can be programmed wirelessly over the Bluetooth® connection. Instructions are available for [getting started with the Arduino BT](//www.arduino.cc/en/Guide/ArduinoBT).
+The Arduino BT (Bluetooth) is a microcontroller board based on the ATmega168 ([datasheet](/static/resources/datasheets/Datasheet-ATmega48-88-168-doc2545.pdf)) and the Bluegiga WT11 Bluetooth® module [datasheet](/static/resources/datasheets/WT11_Datasheet.pdf) \[pdf\]). It has 14 digital input/output pins (of which 6 can be used as PWM outputs and one can be used to reset the WT11 module), 6 analog inputs, a 16 MHz crystal oscillator, screw terminals for power, an ICSP header, and a reset button. It contains everything needed to support the microcontroller and can be programmed wirelessly over the Bluetooth® connection. Instructions are available for [getting started with the Arduino BT](//www.arduino.cc/en/Guide/ArduinoBT).
 
 ### Summary
 
@@ -85,7 +85,7 @@ The ATmega168 also supports I2C (TWI) and SPI communication. The Arduino softwar
 
 The Arduino BT can be programmed with the Arduino software ([download](//www.arduino.cc/en/Main/Software)). For details, see the [reference](//www.arduino.cc/en/Reference/HomePage) and [tutorials]((https://docs.arduino.cc/tutorials/).
 
-The ATmega168 on the Arduino BT comes preburned with a [bootloader](https://docs.arduino.cc/hacking/software/Bootloader) that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol ([reference](http://www.atmel.com/dyn/resources/prod%5Fdocuments/doc2525.pdf), [C header files](http://www.atmel.com/dyn/resources/prod%5Fdocuments/avr061.zip)).
+The ATmega168 on the Arduino BT comes preburned with a [bootloader](https://docs.arduino.cc/hacking/software/Bootloader) that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol ([reference](/resources/datasheets/doc2525.pdf), [C header files](/resources/datasheets/assets/avr061.zip)).
 
 You can also bypass the bootloader and program the ATmega168 through the ICSP (In-Circuit Serial Programming) header; see [these instructions](https://docs.arduino.cc/hacking/software/Programmer) for details.
 
@@ -97,7 +97,7 @@ The maximum length and width of the BT are approximately 3.2 and 2.1 inches resp
 
 ## Arduino BT v1 Initialization Sketch
 
-This sketch is run once on each Arduino BT v1 to initialize the Bluetooth® module before the board is shipped (you shouldn't need to run this code; it's just here for reference). For details on the commands sent to the module, see the [iWrap data sheet](http://www.bluegiga.com/iWRAP%5Fsoftware).
+This sketch is run once on each Arduino BT v1 to initialize the Bluetooth® module before the board is shipped (you shouldn't need to run this code; it's just here for reference). For details on the commands sent to the module, see the [iWrap data sheet](./static/resources/datasheets/UG218.pdf).
 
 ```arduino
 /* BT test 01
@@ -133,4 +133,4 @@ void loop () {
   Serial.println("ciao");
   delay(1000);
 }
-```
+```

content/retired/01.boards/arduino-BT-v1/content.md

@@ -11,7 +11,7 @@ source: "https://arduino.cc/en/Main/ArduinoBoardBT"
 
 ### Overview
 
-The Arduino BT is a microcontroller board originally was based on the ATmega168, but now is supplied with the 328P ([datasheet](http://www.atmel.com/devices/atmega328.aspx?tab=documents)) and the Bluegiga WT11 Bluetooth® module ([details](http://www.bluegiga.com/WT11i%5FClass%5F1%5FBluetooth%5FModule) and [datasheet](http://www.bluegiga.com/files/bluegiga/Pub%20files/WT11i%5FProduct%5FBrief%5F140711%5Flores.pdf)). It supports wireless serial communication over Bluetooth® (but is not compatible with Bluetooth® headsets or other audio devices). It has 14 digital input/output pins (of which 6 can be used as PWM outputs and one can be used to reset the WT11 module), 6 analog inputs, a 16 MHz crystal oscillator, screw terminals for power, an ICSP header, and a reset button. It contains everything needed to support the microcontroller and can be programmed wirelessly over the Bluetooth® connection. Instructions are available for [getting started with the Arduino BT](content\retired\06.getting-started-guides\ArduinoBT).
+The Arduino BT is a microcontroller board originally was based on the ATmega168, but now is supplied with the 328P ([datasheet](./static/resources/datasheets/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061B.pdf)) and the Bluegiga WT11 Bluetooth® module [datasheet](./static/resources/datasheets/assets/WT11_Datasheet.pdf)). It supports wireless serial communication over Bluetooth® (but is not compatible with Bluetooth® headsets or other audio devices). It has 14 digital input/output pins (of which 6 can be used as PWM outputs and one can be used to reset the WT11 module), 6 analog inputs, a 16 MHz crystal oscillator, screw terminals for power, an ICSP header, and a reset button. It contains everything needed to support the microcontroller and can be programmed wirelessly over the Bluetooth® connection. Instructions are available for [getting started with the Arduino BT](content\retired\06.getting-started-guides\ArduinoBT).
 
 ### Summary
 
@@ -89,10 +89,10 @@ The ATmega328P also supports I2C (TWI) and SPI communication. The Arduino softwa
 
 The Arduino BT can be programmed with the Arduino software ([download](//www.arduino.cc/en/Main/Software)). For details, see the [reference](//www.arduino.cc/en/Reference/HomePage) and [tutorials](https://docs.arduino.cc/tutorials/).
 
-The ATmega328P on the Arduino BT comes preburned with a [bootloader](//www.arduino.cc/en/Tutorial/Bootloader) that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol ([reference](http://www.atmel.com/dyn/resources/prod%5Fdocuments/doc2525.pdf), [C header files](http://www.atmel.com/dyn/resources/prod%5Fdocuments/avr061.zip)).
+The ATmega328P on the Arduino BT comes preburned with a [bootloader](//www.arduino.cc/en/Tutorial/Bootloader) that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol ([reference](/resources/datasheets/doc2525.pdf), [C header files](/resources/datasheets/avr061.zip)).
 
 You can also bypass the bootloader and program the ATmega328P through the ICSP (In-Circuit Serial Programming) header; see [these instructions](//www.arduino.cc/en/Hacking/Programmer) for details.
 
 ### Physical Characteristics
 
-The maximum length and width of the BT are approximately 3.2 and 2.1 inches respectively. Three screw holes allow the board to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.
+The maximum length and width of the BT are approximately 3.2 and 2.1 inches respectively. Three screw holes allow the board to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.

content/retired/01.boards/arduino-BT/content.md

@@ -9,7 +9,7 @@ source: "https://arduino.cc/en/Main/ArduinoBoardDiecimila"
 
 ### Overview
 
-The Arduino Diecimila is a microcontroller board based on the ATmega168 ([datasheet](http://www.atmel.com/dyn/resources/prod%5Fdocuments/doc2545.pdf)). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
+The Arduino Diecimila is a microcontroller board based on the ATmega168 ([datasheet](https://content.arduino.cc/assets/Datasheet-ATmega48-88-168-doc2545.pdf)). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
 
 "Diecimila" means 10,000 in Italian and was named thusly to mark the fact that over 10,000 Arduino boards have been made. The Diecimila is the latest in a series of USB Arduino boards.
 
@@ -94,7 +94,7 @@ The ATmega168 also supports I2C (TWI) and SPI communication. The Arduino softwar
 
 The Arduino Diecimila can be programmed with the Arduino software ([download](//www.arduino.cc/en/Main/Software)). For details, see the [reference](//www.arduino.cc/en/Reference/HomePage) and [tutorials](//www.arduino.cc/en/Tutorial/HomePage).
 
-The ATmega168 on the Arduino Diecimila comes preburned with a [bootloader](//www.arduino.cc/en/Tutorial/Bootloader) that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol ([reference](http://www.atmel.com/dyn/resources/prod%5Fdocuments/doc2525.pdf), [C header files](http://www.atmel.com/dyn/resources/prod%5Fdocuments/avr061.zip)).
+The ATmega168 on the Arduino Diecimila comes preburned with a [bootloader](//www.arduino.cc/en/Tutorial/Bootloader) that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol ([reference](./static/resources/datasheets/doc2525.pdf), [C header files](./static/resources/datasheets/avr061.zip)).
 
 You can also bypass the bootloader and program the ATmega168 through the ICSP (In-Circuit Serial Programming) header; see [these instructions](//www.arduino.cc/en/Hacking/Programmer) for details.
 

content/retired/01.boards/arduino-diecimila/content.md

@@ -9,7 +9,7 @@ source: "https://arduino.cc/en/Main/ArduinoBoardDuemilanove"
 
 ### Overview
 
-The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 ([datasheet](http://www.atmel.com/dyn/resources/prod%5Fdocuments/doc2545.pdf)) or ATmega328 ([datasheet](http://www.atmel.com/images/Atmel-8271-8-bit-AVR-Microcontroller-ATmega48A-48PA-88A-88PA-168A-168PA-328-328P%5Fdatasheet%5FComplete.pdf)). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
+The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 ([datasheet](/resources/datasheets/Datasheet-ATmega48-88-168-doc2545.pdf)) or ATmega328 ([datasheet](/resources/datasheets/ATmega48A_ATmega48PA_ATmega88A_ATmega88PA.pdf)). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
 
 "Duemilanove" means 2009 in Italian and is named after the year of its release. The Duemilanove is the latest in a series of USB Arduino boards.
 
@@ -56,7 +56,7 @@ The ATmega168 has 16 KB of flash memory for storing code (of which 2 KB is used
 
 ### Input and Output
 
-Each of the 14 digital pins on the Duemilanove can be used as an input or output, using [pinMode()](//www.arduino.cc/en/Reference/PinMode), [digitalWrite()](//www.arduino.cc/en/Reference/DigitalWrite), and [digitalRead()](//www.arduino.cc/en/Reference/DigitalRead) functions. They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions:
+Each of the 14 digital pins on the Duemilanove can be used as an input or output, using [pinMode()](http://www.arduino.cc/en/Reference/PinMode), [digitalWrite()](http://www.arduino.cc/en/Reference/DigitalWrite), and [digitalRead()](http://www.arduino.cc/en/Reference/DigitalRead) functions. They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions:
 
 * **Serial: 0 (RX) and 1 (TX).** Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the FTDI USB-to-TTL Serial chip.
 * **External Interrupts: 2 and 3.** These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the [attachInterrupt()](//www.arduino.cc/en/Reference/AttachInterrupt) function for details.
@@ -87,7 +87,7 @@ The ATmega168 and ATmega328 also support I2C (TWI) and SPI communication. The Ar
 
 The Arduino Duemilanove can be programmed with the Arduino software ([download](//www.arduino.cc/en/Main/Software)). Select "Arduino Diecimila or Duemilanove w/ ATmega168" or "Arduino Duemilanove w/ ATmega328" from the **Tools > Board** menu (according to the microcontroller on your board). For details, see the [reference](//www.arduino.cc/en/Reference/HomePage) and [tutorials](//www.arduino.cc/en/Tutorial/HomePage).
 
-The ATmega168 or ATmega328 on the Arduino Duemilanove comes preburned with a [bootloader](//www.arduino.cc/en/Tutorial/Bootloader) that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol ([reference](http://www.atmel.com/dyn/resources/prod%5Fdocuments/doc2525.pdf), [C header files](http://www.atmel.com/dyn/resources/prod%5Fdocuments/avr061.zip)).
+The ATmega168 or ATmega328 on the Arduino Duemilanove comes preburned with a [bootloader](//www.arduino.cc/en/Tutorial/Bootloader) that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol ([reference](./static/resources/datasheets/doc2525.pdf), [C header files](./static/resources/datasheets/avr061.zip)).
 
 You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header; see [these instructions](https://docs.arduino.cc/hacking/software/Programmer) for details.
 

content/retired/01.boards/arduino-duemilanove/content.md

@@ -35,7 +35,7 @@ In the [Getting Started section](https://www.arduino.cc/en/Guide/ArduinoEsplora)
 
 * On the Software [on the Arduino Forum](https://forum.arduino.cc/index.php?board=93.0)
 * On Projects [on the Arduino Forum](https://forum.arduino.cc/index.php?board=3.0)
-* On the Product itself through [our Customer Support](https://store.arduino.cc/index.php?main_page=contact_us&language=en)
+* On the Product itself through [our Customer Support](https://support.arduino.cc/hc)
 
 ## Documentation