Merge pull request #1006 from arduino/jhansson-ard/retired-products

Jhansson ard/retired products

Author: jhansson-ard

content/retired/01.boards/arduino-101-619/content.md

@@ -3,6 +3,8 @@ title: "Arduino Diecimila"
 source: "https://arduino.cc/en/Main/ArduinoBoardDiecimila"
 ---
 
+***Note: This page refers to a product that is retired.***
+
 ## Arduino Diecimila
 
 ![](assets/ArduinoDiecimila400.jpg)

content/retired/01.boards/arduino-BT-v1/content.md

@@ -3,6 +3,8 @@ title: Arduino Fio
 source: https://www.arduino.cc/en/Main/ArduinoBoardFio
 ---
 
+***Note: This page refers to a product that is retired.***
+
 ![The Arduino Fio board.](./assets/ArduinoFio.jpg)
 
 ## Overview

content/retired/01.boards/arduino-BT/content.md

@@ -7,6 +7,8 @@ sku: "ABX00001"
 source: "https://store.arduino.cc/arduino-gemma"
 ---
 
+***Note: This page refers to a product that is retired.***
+
 ![The Arduino Gemma board](assets/abx00001_front.jpg)
 
 The **Arduino Gemma** is a microcontroller board made by [Adafruit](https://www.adafruit.com/) based on the [ATtiny85](http://www.atmel.com/assets/atmel-2586-avr-8-bit-microcontroller-attiny25-attiny45-attiny85_datasheet.pdf). It has 3 digital input/output pins (of which 2 can be used as PWM outputs and 1 as analog input), an 8 MHz resonator, a micro USB connection, a JST connector for a 3.7V battery, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a battery to get started.

content/retired/01.boards/arduino-diecimila/content.md

@@ -7,6 +7,8 @@ sku: "A000126"
 source: "https://store.arduino.cc/arduino-industrial-101"
 ---
 
+***Note: This page refers to a product that is retired.***
+
 ![The Arduino Industrial 101 board](assets/A000126_ArduinoIndustrial101_featured_2.jpg)
 
 **Arduino Industrial 101** is an Evaluation board for Arduino 101 LGA module. The ATmega32u4 microcontroller is integrated in the baseboard. The module supports a Linux distribution based on OpenWRT named LininoOS. The board has built-in WiFi (IEEE 802.11b/g/n operations up to 150Mbps 1x1 2.4 GHz), 3 GPIOs (of which 2 can be used as PWM Outputs), 4 Analog Inputs, 1 USB, 1 Ethernet signal on pin headers and a built-in DC/DC converter. Check out the assembling guide and simply connect your board to a computer with a micro USB cable to get started.

content/retired/01.boards/arduino-duemilanove/content.md

@@ -7,6 +7,8 @@ sku: "A000092"
 source: "https://store.arduino.cc/arduino-isp"
 ---
 
+***Note: This page refers to a product that is retired.***
+
 ![The Arduino ISP board](assets/A000092_last_featured_2.jpg)
 
 The **Arduino ISP** is a tiny AVR-ISP (in-system programmer) based on David Mellis' project FabISP([http://fab.cba.mit.edu/content/projects/fabisp/](http://fab.cba.mit.edu/content/archive/projects/fabisp/)). With this programmer you can upload sketches and burn the bootloader on any AVR based boards, including Arduinos. By uploading a sketch with an external programmer you can remove the bootloader and use the extra space for your sketch. The Arduino ISP can also be used to burn the Arduino bootloader, so you can recover your chip if you accidentally corrupt the bootloader. Burning the bootloader is also necessary when you use a new ATmega microcontroller in your Arduino, and you wish to use the bootloader to upload a sketch via the USB-Serial connection.

content/retired/01.boards/arduino-esplora/content.md

@@ -6,6 +6,8 @@ sku: "A000023"
 source: "https://store.arduino.cc/arduino-leonardo-eth-2-with-poe"
 ---
 
+***Note: This page refers to a product that is retired.***
+
 ![The Arduino Leonardo ETH with PoE](assets/a000023_iso.jpg)
 
 The Arduino Leonardo ETH is the Leonardo with a built-in ethernet controller (Wiznet 5500 controller with RJ45 connector). Optional PoE (Power over Ethernet)

content/retired/01.boards/arduino-ethernet-rev3-with-poe/content.md

@@ -7,6 +7,8 @@ sku: "A000022"
 source: "https://store.arduino.cc/arduino-leonardo-eth"
 ---
 
+***Note: This page refers to a product that is retired.***
+
 ![The Arduino Leonardo ETH board](./assets/a000022_front.jpg)
 
 The **Leonardo ETH** is a microcontroller board based on the ATmega32U4 (datasheet) and the new W5500 TCP/IP Embedded Ethernet Controller (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a RJ45 connection, a micro USB connector, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

content/retired/01.boards/arduino-ethernet-rev3-without-poe/content.md

@@ -7,6 +7,8 @@ sku: "A000111"
 source: "https://store.arduino.cc/m0-pro"
 ---
 
+***Note: This page refers to a product that is retired.***
+
 ![The Arduino M0 Pro board](./assets/a000111_front_1.jpg)
 
 With the new **Arduino M0 Pro** board, the more creative individual will have the potential to create one’s most imaginative and new ideas for IoT devices, wearable technologies, high tech automation, wild robotics and other not yet thinkable adventures in the world of makers. The Arduino M0 pro represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core.

content/retired/01.boards/arduino-fio/content.md

@@ -7,6 +7,8 @@ sku: "A000103"
 source: "https://store.arduino.cc/arduino-m0"
 ---
 
+***Note: This page refers to a product that is retired.***
+
 ![The Arduino M0 board](./assets/a000103_front.jpg)
 
 With the new **Arduino M0** board, the more creative individual will have the potential to create one’s most imaginative and new ideas for IoT devices, wearable technologies, high tech automation, wild robotics and other not yet thinkable adventures in the world of makers. The Arduino M0 represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core. With the addition of the M0 board, the Arduino family becomes larger with a new member providing increased performance.