Rebuild on mbed 6.12

Author: facchinm

cores/arduino/mbed/connectivity/FEATURE_BLE/include/ble/Gap.h

@@ -747,7 +747,9 @@ class Gap {
      * @param handle Advertising set handle.
      * @param maxDuration Max duration for advertising (in units of 10ms) - 0 means no limit.
      * @param maxEvents Max number of events produced during advertising - 0 means no limit.
-     * @return BLE_ERROR_NONE on success.
+     * @return BLE_ERROR_NONE on success. This does not guarantee the set has started if
+     * extended advertising is enabled. Register an event handler and wait for onAdvertisingStart
+     * event. An (unlikely) failed start the status of the event will contain an error.
      *
      * @see EventHandler::onAdvertisingStart when the advertising starts.
      * @see EventHandler::onScanRequestReceived when a scan request is received.
@@ -765,7 +767,9 @@ class Gap {
      *  which will not be affected.
      *
      * @param handle Advertising set handle.
-     * @return BLE_ERROR_NONE on success.
+     * @return BLE_ERROR_NONE on success. For extented advertising this does not guarantee
+     * the set is stopped if. Register an event handler and wait for onAdvertisingEnd event.
+     * An (unlikely) failed stop the event status will contain the error code.
      */
     ble_error_t stopAdvertising(advertising_handle_t handle);
 

cores/arduino/mbed/connectivity/FEATURE_BLE/include/ble/GattServer.h

@@ -122,8 +122,9 @@ class GattServer {
         }
 
         /**
-         * Function invoked when the server has sent data to a client as
-         * part of a notification/indication.
+         * Function invoked when the server has sent data to a client. For
+         * notifications this is triggered when data is sent, for indications
+         * it's only triggered when the confirmation has been received.
          *
          * @note params has a temporary scope and should be copied by the
          * application if needed later
@@ -188,12 +189,13 @@ class GattServer {
         }
 
         /**
-         * Function invoked when an ACK has been received for an
-         * indication sent to the client.
+         * Event not used.
          *
          * @note params has a temporary scope and should be copied by the
          * application if needed later
          */
+        MBED_DEPRECATED_SINCE("mbed-os-6.11.0", "This event is never triggered. Indication triggers onDataSent"
+                                                "when confirmation is received.")
         virtual void onConfirmationReceived(const GattConfirmationReceivedCallbackParams &params) {
             (void)params;
         }
@@ -274,7 +276,7 @@ class GattServer {
      * Event handler that handles subscription to characteristic updates,
      * unsubscription from characteristic updates and notification confirmation.
      *
-     * @see onUpdatesEnabled() onUpdateDisabled() onConfirmationReceived()
+     * @see onUpdatesEnabled() onUpdateDisabled()
      */
     typedef FunctionPointerWithContext<GattAttribute::Handle_t> EventCallback_t;
 
@@ -705,7 +707,8 @@ class GattServer {
      * @param[in] callback Event handler being registered.
      */
     MBED_DEPRECATED_SINCE("mbed-os-6.3.0", "Individual callback-registering functions have"
-                          "been replaced by GattServer::setEventHandler. Use that function instead.")
+                          "been replaced by an event handler. Indication confirmation triggers"
+                          "GattServer::onDataSent event instead.")
     void onConfirmationReceived(EventCallback_t callback);
 
 #if !defined(DOXYGEN_ONLY)

cores/arduino/mbed/connectivity/FEATURE_BLE/include/ble/common/BLERoles.h

@@ -19,6 +19,50 @@
 #ifndef MBED_BLE_ROLES_H__
 #define MBED_BLE_ROLES_H__
 
+/* we provide default values if no configuration is present (e.g. in unittests) */
+#if !defined(BLE_ROLE_OBSERVER)
+#define BLE_ROLE_OBSERVER 1
+#endif
+#if !defined(BLE_ROLE_BROADCASTER)
+#define BLE_ROLE_BROADCASTER 1
+#endif
+#if !defined(BLE_ROLE_CENTRAL)
+#define BLE_ROLE_CENTRAL 1
+#endif
+#if !defined(BLE_ROLE_PERIPHERAL)
+#define BLE_ROLE_PERIPHERAL 1
+#endif
+#if !defined(BLE_FEATURE_GATT_CLIENT)
+#define BLE_FEATURE_GATT_CLIENT 1
+#endif
+#if !defined(BLE_FEATURE_GATT_SERVER)
+#define BLE_FEATURE_GATT_SERVER 1
+#endif
+#if !defined(BLE_FEATURE_SECURITY)
+#define BLE_FEATURE_SECURITY 1
+#endif
+#if !defined(BLE_FEATURE_SECURE_CONNECTIONS)
+#define BLE_FEATURE_SECURE_CONNECTIONS 1
+#endif
+#if !defined(BLE_FEATURE_SIGNING)
+#define BLE_FEATURE_SIGNING 1
+#endif
+#if !defined(BLE_FEATURE_WHITELIST)
+#define BLE_FEATURE_WHITELIST 1
+#endif
+#if !defined(BLE_FEATURE_PRIVACY)
+#define BLE_FEATURE_PRIVACY 1
+#endif
+#if !defined(BLE_FEATURE_PHY_MANAGEMENT)
+#define BLE_FEATURE_PHY_MANAGEMENT 1
+#endif
+#if !defined(BLE_FEATURE_EXTENDED_ADVERTISING)
+#define BLE_FEATURE_EXTENDED_ADVERTISING 1
+#endif
+#if !defined(BLE_FEATURE_PERIODIC_ADVERTISING)
+#define BLE_FEATURE_PERIODIC_ADVERTISING 1
+#endif
+
 #if !(BLE_ROLE_OBSERVER) && !(BLE_ROLE_BROADCASTER)
     #error "BLE requires at least one role 'BROADCASTER' or 'OBSERVER' to be enabled"
 #endif

cores/arduino/mbed/connectivity/FEATURE_BLE/include/ble/common/blecommon.h

@@ -216,7 +216,17 @@ enum ble_error_t {
     /**
      * Data not found or there is nothing to return.
      */
-    BLE_ERROR_NOT_FOUND = 13
+    BLE_ERROR_NOT_FOUND = 13,
+
+    /**
+     * Specified timeout expired.
+     */
+    BLE_ERROR_TIMEOUT = 14,
+
+    /**
+     * Specified limit expired.
+     */
+    BLE_ERROR_LIMIT_REACHED = 15
 };
 
 /**

cores/arduino/mbed/connectivity/FEATURE_BLE/include/ble/gap/Events.h

@@ -586,9 +586,10 @@ struct AdvertisingStartEvent {
     /** Create an advertising start event.
      *
      * @param advHandle Advertising set handle.
+     * @param status Advertising set start command status.
      */
-    AdvertisingStartEvent(advertising_handle_t advHandle) :
-        advHandle(advHandle)
+    AdvertisingStartEvent(advertising_handle_t advHandle, ble_error_t status = BLE_ERROR_NONE) :
+        advHandle(advHandle), status(status)
     {
     }
 
@@ -600,8 +601,15 @@ struct AdvertisingStartEvent {
         return advHandle;
     }
 
+    /** Get status of operation. */
+    ble_error_t getStatus() const
+    {
+        return status;
+    }
+
 private:
     advertising_handle_t advHandle;
+    ble_error_t status;
 };
 
 /**
@@ -610,29 +618,38 @@ struct AdvertisingStartEvent {
  * @see ble::Gap::EventHandler::onAdvertisingEnd().
  *
  * @note The connection handle, connected flag and completed_event fields are
- * valid if the flag legacy is not set to true.
+ * valid if the flag legacy is not set to true. If status is different from BLE_ERROR_NONE
+ * the completed_events field is not valid and the set may still be active.
  */
 struct AdvertisingEndEvent {
 #if !defined(DOXYGEN_ONLY)
 
     /** Create an extended advertising end event.
      *
      * @param advHandle Advertising set handle.
-     * @param connection Connection handle.
-     * @param completed_events Number of events created during before advertising end.
+     * @param connection Connection handle - only valid if connected is True.
+     * @param completed_events Number of events created during before advertising end - only valid
+     *        if advertising end has been caused by BLE_ERROR_LIMIT_REACHED, not the local user.
+     *        Check getStatus().
      * @param connected True if connection has been established.
+     * @param status Error code showing the reason for event. BLE_ERROR_LIMIT_REACHED if set number
+     *        of events have been reached. BLE_ERROR_TIMEOUT if set time has elapsed.
+     *        BLE_ERROR_SUCCESS if connection occurred or user ended the set. Check isConnected()
+     *        to determine which.
      */
     AdvertisingEndEvent(
         advertising_handle_t advHandle,
         connection_handle_t connection,
         uint8_t completed_events,
-        bool connected
+        bool connected,
+        ble_error_t status = BLE_ERROR_NONE
     ) :
         advHandle(advHandle),
         connection(connection),
         completed_events(completed_events),
         connected(connected),
-        legacy(false)
+        legacy(false),
+        status(status)
     {
     }
 
@@ -643,7 +660,8 @@ struct AdvertisingEndEvent {
         connection(),
         completed_events(0),
         connected(false),
-        legacy(true)
+        legacy(true),
+        status(BLE_ERROR_NONE)
     {
     }
 
@@ -683,12 +701,20 @@ struct AdvertisingEndEvent {
         return legacy;
     }
 
+    /** Get the result of the stop advertising event. If the status is not BLE_ERROR_NONE the set
+     * may still be active. */
+    ble_error_t getStatus() const
+    {
+        return status;
+    }
+
 private:
     advertising_handle_t advHandle;
     connection_handle_t connection;
     uint8_t completed_events;
     bool connected;
     bool legacy;
+    ble_error_t status;
 };
 
 /**

cores/arduino/mbed/connectivity/FEATURE_BLE/include/ble/gatt/GattCharacteristic.h

@@ -1672,19 +1672,30 @@ class GattCharacteristic {
      *
      * @attention This function is not meant to be called by user code.
      *
-     * @param[in] params Context of the read-auth request; it contains an
+     * @param[in,out] params Context of the read-auth request; it contains an
      * out-parameter used as a reply and the handler can fill it with outgoing
-     * data.
+     * data. The params->data provides a pointer to the data and params->len
+     * provides the length of this data. params->len is also used to pass the
+     * maximum size of data that the params->data can contain. If you set the
+     * params->len to a value larger than the passed in value the read operation
+     * will fail.
      *
      * @return A GattAuthCallbackReply_t value indicating whether authorization
      * is granted.
      *
+     * @note If the read is approved, the event handler can specify an outgoing
+     * value directly with the help of the fields params->data and params->len.
+     *
      * @note If the read request is approved and params->data remains nullptr, then
      * the current characteristic value is used in the read response payload.
      *
-     * @note If the read is approved, the event handler can specify an outgoing
-     * value directly with the help of the fields
-     * GattReadAuthCallbackParams::data and GattReadAuthCallbackParams::len.
+     * @note The params->len parameter initially contains the maximum length of
+     * data that can be returned. Set it to the length of your data but it must
+     * not be larger than the original value.
+     *
+     * @note You must also take into account the offset provided in params->offset.
+     * The params->len you provide must be larger then the offset as the read operation
+     * will attempt to read at that offset.
      */
     GattAuthCallbackReply_t authorizeRead(GattReadAuthCallbackParams *params)
     {

cores/arduino/mbed/connectivity/FEATURE_BLE/source/cordio/source/BLEInstanceBaseImpl.h

@@ -45,7 +45,13 @@
 #include "source/PalPrivateAddressControllerImpl.h"
 #include "source/generic/PrivateAddressController.h"
 
+#include "drivers/Timeout.h"
+#ifdef DEVICE_LPTICKER
+#include "drivers/LowPowerTimeout.h"
 #include "drivers/LowPowerTimer.h"
+#else
+#include "drivers/Timer.h"
+#endif
 
 namespace ble {
 
@@ -57,6 +63,14 @@ namespace impl {
  * @see BLEInstanceBase
  */
 class BLEInstanceBase final : public ble::BLEInstanceBase {
+#ifdef DEVICE_LPTICKER
+    using Timeout = mbed::LowPowerTimeout;
+    using Timer   = mbed::LowPowerTimer;
+#else
+    using Timeout = mbed::Timeout;
+    using Timer   = mbed::Timer;
+#endif
+
     friend PalSigningMonitor;
 
     /**
@@ -200,7 +214,7 @@ class BLEInstanceBase final : public ble::BLEInstanceBase {
     } initialization_status;
 
     mutable ble::impl::PalEventQueue _event_queue;
-    mbed::LowPowerTimer _timer;
+    Timer _timer;
     uint64_t _last_update_us;
 };