diff --git a/examples/Tools/Factory_Set_Initial_Servo_Position/Factory_Set_Initial_Servo_Position.ino b/examples/Tools/Factory_Set_Initial_Servo_Position/Factory_Set_Initial_Servo_Position.ino
new file mode 100644
index 0000000..473b9e1
--- /dev/null
+++ b/examples/Tools/Factory_Set_Initial_Servo_Position/Factory_Set_Initial_Servo_Position.ino
@@ -0,0 +1,131 @@
+/* This example is used for setting all servos to the
+ * desired initial servo position prior to mounting the
+ * servo horns.
+ */
+
+/**************************************************************************************
+ * INCLUDE
+ **************************************************************************************/
+
+#include <Braccio++.h>
+
+/**************************************************************************************
+ * TYPEDEF
+ **************************************************************************************/
+
+class InitialServoPosition
+{
+public:
+  InitialServoPosition(int const motor_id, float const motor_angle_deg)
+  : _motor_id{motor_id}
+  , _motor_angle_deg{motor_angle_deg}
+  { }
+
+  inline int id() const { return _motor_id; }
+  inline float angle() const { return _motor_angle_deg; }
+
+private:
+  int const _motor_id;
+  float const _motor_angle_deg;
+};
+
+/**************************************************************************************
+ * CONSTANT
+ **************************************************************************************/
+
+static std::array<InitialServoPosition, 6> const INITIAL_SERVO_POSITION =
+{
+  InitialServoPosition{1, SmartServoClass::MAX_ANGLE / 2.0f},
+  InitialServoPosition{2, SmartServoClass::MAX_ANGLE / 2.0f},
+  InitialServoPosition{3, SmartServoClass::MAX_ANGLE / 2.0f},
+  InitialServoPosition{4, SmartServoClass::MAX_ANGLE / 2.0f},
+  InitialServoPosition{5, SmartServoClass::MAX_ANGLE / 2.0f},
+  InitialServoPosition{6, 90.0f},
+};
+
+/**************************************************************************************
+ * FUNCTIONS
+ **************************************************************************************/
+
+bool set_initial_servo_position(int const id, float const target_angle)
+{
+  Serial.print("Connecting .... ");
+  for (; !Braccio.get(id).connected(); delay(10)) { }
+  Serial.println("OK.");
+  delay(500);
+
+  Serial.print("Disengaging ... ");
+  Braccio.get(id).disengage();
+  Serial.println("OK.");
+  delay(500);
+
+  Serial.print("Engaging ...... ");
+  Braccio.get(id).engage();
+  Serial.println("OK.");
+  delay(500);
+
+  /* Drive to the position for assembling the servo horn. */
+  auto const start = millis();
+  auto isTimeout = [start]() -> bool { return ((millis() - start) > 5000); };
+  auto isTargetAngleReached = [target_angle, id](float const epsilon) -> bool { return (fabs(Braccio.get(id).position() - target_angle) <= epsilon); };
+
+  static float constexpr EPSILON = 2.0f;
+
+  for ( float current_angle = Braccio.get(id).position();
+       !isTargetAngleReached(EPSILON) && !isTimeout();)
+  {
+    Braccio.get(id).move().to(target_angle).in(200ms);
+    delay(250);
+  
+    char msg[64] = {0};
+    snprintf(msg, sizeof(msg), "Angle (Target | Current) = %.2f | %.2f", target_angle, Braccio.get(id).position());
+    Serial.println(msg);
+  }
+
+  if (!isTargetAngleReached(EPSILON)) {
+    Serial.println("Servo did not reach target angle.");
+    return false;
+  }
+
+  if (isTimeout()) {
+    Serial.println("Timeout error.");
+    return false;
+  }
+
+  return true;
+}
+
+/**************************************************************************************
+ * SETUP/LOOP
+ **************************************************************************************/
+
+void setup()
+{
+  Serial.begin(115200);
+  while(!Serial) { }
+
+  Braccio.begin();
+  Braccio.disengage();
+
+  for (auto & servo : INITIAL_SERVO_POSITION)
+  {
+    Serial.print("Servo ");
+    Serial.print(servo.id());
+    Serial.print(": Target Angle = ");
+    Serial.print(servo.angle());
+    Serial.print(" °");
+    Serial.println();
+
+    if (!set_initial_servo_position(servo.id(), servo.angle())) {
+      Serial.println("ERROR.");
+      return;
+    }
+  }
+
+  Serial.println("SUCCESS : all servos are set to their initial position.");
+}
+
+void loop()
+{
+
+}