diff --git a/boards.txt b/boards.txt index 64b317d94..0bb4885cd 100644 --- a/boards.txt +++ b/boards.txt @@ -386,7 +386,7 @@ adafruit_neotrinkey_m0.pid.0=0x80EF adafruit_neotrinkey_m0.vid.1=0x239A adafruit_neotrinkey_m0.pid.1=0x00EF adafruit_neotrinkey_m0.vid.1=0x239A -adafruit_neotrinkey_m0.pid.1=0x00F0 +adafruit_neotrinkey_m0.pid.1=0x80F0 adafruit_neotrinkey_m0.upload.tool=bossac adafruit_neotrinkey_m0.upload.protocol=sam-ba adafruit_neotrinkey_m0.upload.maximum_size=262144 @@ -426,6 +426,200 @@ adafruit_neotrinkey_m0.menu.debug.off=Off adafruit_neotrinkey_m0.menu.debug.on=On adafruit_neotrinkey_m0.menu.debug.on.build.flags.debug=-g +# Adafruit Rotary Trinkey (SAMD21) +# ------------------------------ +adafruit_rotarytrinkey_m0.name=Adafruit Rotary Trinkey (SAMD21) +adafruit_rotarytrinkey_m0.vid.0=0x239A +adafruit_rotarytrinkey_m0.pid.0=0x80FB +adafruit_rotarytrinkey_m0.vid.1=0x239A +adafruit_rotarytrinkey_m0.pid.1=0x00FB +adafruit_rotarytrinkey_m0.vid.1=0x239A +adafruit_rotarytrinkey_m0.pid.1=0x80FC +adafruit_rotarytrinkey_m0.upload.tool=bossac +adafruit_rotarytrinkey_m0.upload.protocol=sam-ba +adafruit_rotarytrinkey_m0.upload.maximum_size=262144 +adafruit_rotarytrinkey_m0.upload.offset=0x2000 +adafruit_rotarytrinkey_m0.upload.use_1200bps_touch=true +adafruit_rotarytrinkey_m0.upload.wait_for_upload_port=true +adafruit_rotarytrinkey_m0.upload.native_usb=true +adafruit_rotarytrinkey_m0.build.mcu=cortex-m0plus +adafruit_rotarytrinkey_m0.build.f_cpu=48000000L +adafruit_rotarytrinkey_m0.build.usb_product="Rotary Trinkey M0" +adafruit_rotarytrinkey_m0.build.usb_manufacturer="Adafruit" +adafruit_rotarytrinkey_m0.build.board=ROTARYTRINKEY_M0 +adafruit_rotarytrinkey_m0.build.core=arduino +adafruit_rotarytrinkey_m0.build.extra_flags=-DCRYSTALLESS -DADAFRUIT_ROTARYTRINKEY_M0 -D__SAMD21E18A__ -DARM_MATH_CM0PLUS {build.usb_flags} +adafruit_rotarytrinkey_m0.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld +adafruit_rotarytrinkey_m0.build.openocdscript=openocd_scripts/rotarytrinkey_m0.cfg +adafruit_rotarytrinkey_m0.build.variant=rotarytrinkey_m0 +adafruit_rotarytrinkey_m0.build.variant_system_lib= +adafruit_rotarytrinkey_m0.build.vid=0x239A +adafruit_rotarytrinkey_m0.build.pid=0x80FB +adafruit_rotarytrinkey_m0.bootloader.tool=openocd +adafruit_rotarytrinkey_m0.bootloader.file=rotarytrinkey_m0/bootloader-rotarytrinkey_m0.bin +adafruit_rotarytrinkey_m0.menu.opt.small=Small (-Os) (standard) +adafruit_rotarytrinkey_m0.menu.opt.small.build.flags.optimize=-Os +adafruit_rotarytrinkey_m0.menu.opt.fast=Fast (-O2) +adafruit_rotarytrinkey_m0.menu.opt.fast.build.flags.optimize=-O2 +adafruit_rotarytrinkey_m0.menu.opt.faster=Faster (-O3) +adafruit_rotarytrinkey_m0.menu.opt.faster.build.flags.optimize=-O3 +adafruit_rotarytrinkey_m0.menu.opt.fastest=Fastest (-Ofast) +adafruit_rotarytrinkey_m0.menu.opt.fastest.build.flags.optimize=-Ofast +adafruit_rotarytrinkey_m0.menu.opt.dragons=Here be dragons (-Ofast -funroll-loops) +adafruit_rotarytrinkey_m0.menu.opt.dragons.build.flags.optimize=-Ofast -funroll-loops +adafruit_rotarytrinkey_m0.menu.usbstack.arduino=Arduino +adafruit_rotarytrinkey_m0.menu.usbstack.tinyusb=TinyUSB +adafruit_rotarytrinkey_m0.menu.usbstack.tinyusb.build.flags.usbstack=-DUSE_TINYUSB +adafruit_rotarytrinkey_m0.menu.debug.off=Off +adafruit_rotarytrinkey_m0.menu.debug.on=On +adafruit_rotarytrinkey_m0.menu.debug.on.build.flags.debug=-g + +# Adafruit NeoKey Trinkey (SAMD21) +# ------------------------------ +adafruit_neokeytrinkey_m0.name=Adafruit NeoKey Trinkey (SAMD21) +adafruit_neokeytrinkey_m0.vid.0=0x239A +adafruit_neokeytrinkey_m0.pid.0=0x80FF +adafruit_neokeytrinkey_m0.vid.1=0x239A +adafruit_neokeytrinkey_m0.pid.1=0x00FF +adafruit_neokeytrinkey_m0.vid.1=0x239A +adafruit_neokeytrinkey_m0.pid.1=0x8100 +adafruit_neokeytrinkey_m0.upload.tool=bossac +adafruit_neokeytrinkey_m0.upload.protocol=sam-ba +adafruit_neokeytrinkey_m0.upload.maximum_size=262144 +adafruit_neokeytrinkey_m0.upload.offset=0x2000 +adafruit_neokeytrinkey_m0.upload.use_1200bps_touch=true +adafruit_neokeytrinkey_m0.upload.wait_for_upload_port=true +adafruit_neokeytrinkey_m0.upload.native_usb=true +adafruit_neokeytrinkey_m0.build.mcu=cortex-m0plus +adafruit_neokeytrinkey_m0.build.f_cpu=48000000L +adafruit_neokeytrinkey_m0.build.usb_product="NeoKey Trinkey M0" +adafruit_neokeytrinkey_m0.build.usb_manufacturer="Adafruit" +adafruit_neokeytrinkey_m0.build.board=NEOKEYTRINKEY_M0 +adafruit_neokeytrinkey_m0.build.core=arduino +adafruit_neokeytrinkey_m0.build.extra_flags=-DCRYSTALLESS -DADAFRUIT_NEOKEYTRINKEY_M0 -D__SAMD21E18A__ -DARM_MATH_CM0PLUS {build.usb_flags} +adafruit_neokeytrinkey_m0.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld +adafruit_neokeytrinkey_m0.build.openocdscript=openocd_scripts/neokeytrinkey_m0.cfg +adafruit_neokeytrinkey_m0.build.variant=neokeytrinkey_m0 +adafruit_neokeytrinkey_m0.build.variant_system_lib= +adafruit_neokeytrinkey_m0.build.vid=0x239A +adafruit_neokeytrinkey_m0.build.pid=0x80FF +adafruit_neokeytrinkey_m0.bootloader.tool=openocd +adafruit_neokeytrinkey_m0.bootloader.file=neokeytrinkey_m0/bootloader-neokeytrinkey_m0.bin +adafruit_neokeytrinkey_m0.menu.opt.small=Small (-Os) (standard) +adafruit_neokeytrinkey_m0.menu.opt.small.build.flags.optimize=-Os +adafruit_neokeytrinkey_m0.menu.opt.fast=Fast (-O2) +adafruit_neokeytrinkey_m0.menu.opt.fast.build.flags.optimize=-O2 +adafruit_neokeytrinkey_m0.menu.opt.faster=Faster (-O3) +adafruit_neokeytrinkey_m0.menu.opt.faster.build.flags.optimize=-O3 +adafruit_neokeytrinkey_m0.menu.opt.fastest=Fastest (-Ofast) +adafruit_neokeytrinkey_m0.menu.opt.fastest.build.flags.optimize=-Ofast +adafruit_neokeytrinkey_m0.menu.opt.dragons=Here be dragons (-Ofast -funroll-loops) + +adafruit_neokeytrinkey_m0.menu.opt.dragons.build.flags.optimize=-Ofast -funroll-loops +adafruit_neokeytrinkey_m0.menu.usbstack.arduino=Arduino +adafruit_neokeytrinkey_m0.menu.usbstack.tinyusb=TinyUSB +adafruit_neokeytrinkey_m0.menu.usbstack.tinyusb.build.flags.usbstack=-DUSE_TINYUSB +adafruit_neokeytrinkey_m0.menu.debug.off=Off +adafruit_neokeytrinkey_m0.menu.debug.on=On +adafruit_neokeytrinkey_m0.menu.debug.on.build.flags.debug=-g + + +# Adafruit Slide Trinkey (SAMD21) +# ------------------------------ +adafruit_slidetrinkey_m0.name=Adafruit Slide Trinkey (SAMD21) +adafruit_slidetrinkey_m0.vid.0=0x239A +adafruit_slidetrinkey_m0.pid.0=0x8101 +adafruit_slidetrinkey_m0.vid.1=0x239A +adafruit_slidetrinkey_m0.pid.1=0x0101 +adafruit_slidetrinkey_m0.vid.1=0x239A +adafruit_slidetrinkey_m0.pid.1=0x8102 +adafruit_slidetrinkey_m0.upload.tool=bossac +adafruit_slidetrinkey_m0.upload.protocol=sam-ba +adafruit_slidetrinkey_m0.upload.maximum_size=262144 +adafruit_slidetrinkey_m0.upload.offset=0x2000 +adafruit_slidetrinkey_m0.upload.use_1200bps_touch=true +adafruit_slidetrinkey_m0.upload.wait_for_upload_port=true +adafruit_slidetrinkey_m0.upload.native_usb=true +adafruit_slidetrinkey_m0.build.mcu=cortex-m0plus +adafruit_slidetrinkey_m0.build.f_cpu=48000000L +adafruit_slidetrinkey_m0.build.usb_product="Slide Trinkey M0" +adafruit_slidetrinkey_m0.build.usb_manufacturer="Adafruit" +adafruit_slidetrinkey_m0.build.board=SLIDETRINKEY_M0 +adafruit_slidetrinkey_m0.build.core=arduino +adafruit_slidetrinkey_m0.build.extra_flags=-DCRYSTALLESS -DADAFRUIT_SLIDETRINKEY_M0 -D__SAMD21E18A__ -DARM_MATH_CM0PLUS {build.usb_flags} +adafruit_slidetrinkey_m0.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld +adafruit_slidetrinkey_m0.build.openocdscript=openocd_scripts/slidetrinkey_m0.cfg +adafruit_slidetrinkey_m0.build.variant=slidetrinkey_m0 +adafruit_slidetrinkey_m0.build.variant_system_lib= +adafruit_slidetrinkey_m0.build.vid=0x239A +adafruit_slidetrinkey_m0.build.pid=0x8101 +adafruit_slidetrinkey_m0.bootloader.tool=openocd +adafruit_slidetrinkey_m0.bootloader.file=slidetrinkey_m0/bootloader-slidetrinkey_m0.bin +adafruit_slidetrinkey_m0.menu.opt.small=Small (-Os) (standard) +adafruit_slidetrinkey_m0.menu.opt.small.build.flags.optimize=-Os +adafruit_slidetrinkey_m0.menu.opt.fast=Fast (-O2) +adafruit_slidetrinkey_m0.menu.opt.fast.build.flags.optimize=-O2 +adafruit_slidetrinkey_m0.menu.opt.faster=Faster (-O3) +adafruit_slidetrinkey_m0.menu.opt.faster.build.flags.optimize=-O3 +adafruit_slidetrinkey_m0.menu.opt.fastest=Fastest (-Ofast) +adafruit_slidetrinkey_m0.menu.opt.fastest.build.flags.optimize=-Ofast +adafruit_slidetrinkey_m0.menu.opt.dragons=Here be dragons (-Ofast -funroll-loops) +adafruit_slidetrinkey_m0.menu.opt.dragons.build.flags.optimize=-Ofast -funroll-loops +adafruit_slidetrinkey_m0.menu.usbstack.arduino=Arduino +adafruit_slidetrinkey_m0.menu.usbstack.tinyusb=TinyUSB +adafruit_slidetrinkey_m0.menu.usbstack.tinyusb.build.flags.usbstack=-DUSE_TINYUSB +adafruit_slidetrinkey_m0.menu.debug.off=Off +adafruit_slidetrinkey_m0.menu.debug.on=On +adafruit_slidetrinkey_m0.menu.debug.on.build.flags.debug=-g + +# Adafruit ProxLight Trinkey (SAMD21) +# ------------------------------ +adafruit_proxlighttrinkey_m0.name=Adafruit ProxLight Trinkey (SAMD21) +adafruit_proxlighttrinkey_m0.vid.0=0x239A +adafruit_proxlighttrinkey_m0.pid.0=0x8103 +adafruit_proxlighttrinkey_m0.vid.1=0x239A +adafruit_proxlighttrinkey_m0.pid.1=0x0103 +adafruit_proxlighttrinkey_m0.vid.1=0x239A +adafruit_proxlighttrinkey_m0.pid.1=0x8104 +adafruit_proxlighttrinkey_m0.upload.tool=bossac +adafruit_proxlighttrinkey_m0.upload.protocol=sam-ba +adafruit_proxlighttrinkey_m0.upload.maximum_size=262144 +adafruit_proxlighttrinkey_m0.upload.offset=0x2000 +adafruit_proxlighttrinkey_m0.upload.use_1200bps_touch=true +adafruit_proxlighttrinkey_m0.upload.wait_for_upload_port=true +adafruit_proxlighttrinkey_m0.upload.native_usb=true +adafruit_proxlighttrinkey_m0.build.mcu=cortex-m0plus +adafruit_proxlighttrinkey_m0.build.f_cpu=48000000L +adafruit_proxlighttrinkey_m0.build.usb_product="ProxLight Trinkey M0" +adafruit_proxlighttrinkey_m0.build.usb_manufacturer="Adafruit" +adafruit_proxlighttrinkey_m0.build.board=PROXLIGHTTRINKEY_M0 +adafruit_proxlighttrinkey_m0.build.core=arduino +adafruit_proxlighttrinkey_m0.build.extra_flags=-DCRYSTALLESS -DADAFRUIT_PROXLIGHTTRINKEY_M0 -D__SAMD21E18A__ -DARM_MATH_CM0PLUS {build.usb_flags} +adafruit_proxlighttrinkey_m0.build.ldscript=linker_scripts/gcc/flash_with_bootloader.ld +adafruit_proxlighttrinkey_m0.build.openocdscript=openocd_scripts/proxlighttrinkey_m0.cfg +adafruit_proxlighttrinkey_m0.build.variant=proxlighttrinkey_m0 +adafruit_proxlighttrinkey_m0.build.variant_system_lib= +adafruit_proxlighttrinkey_m0.build.vid=0x239A +adafruit_proxlighttrinkey_m0.build.pid=0x8103 +adafruit_proxlighttrinkey_m0.bootloader.tool=openocd +adafruit_proxlighttrinkey_m0.bootloader.file=proxlighttrinkey_m0/bootloader-proxlighttrinkey_m0.bin +adafruit_proxlighttrinkey_m0.menu.opt.small=Small (-Os) (standard) +adafruit_proxlighttrinkey_m0.menu.opt.small.build.flags.optimize=-Os +adafruit_proxlighttrinkey_m0.menu.opt.fast=Fast (-O2) +adafruit_proxlighttrinkey_m0.menu.opt.fast.build.flags.optimize=-O2 +adafruit_proxlighttrinkey_m0.menu.opt.faster=Faster (-O3) +adafruit_proxlighttrinkey_m0.menu.opt.faster.build.flags.optimize=-O3 +adafruit_proxlighttrinkey_m0.menu.opt.fastest=Fastest (-Ofast) +adafruit_proxlighttrinkey_m0.menu.opt.fastest.build.flags.optimize=-Ofast +adafruit_proxlighttrinkey_m0.menu.opt.dragons=Here be dragons (-Ofast -funroll-loops) +adafruit_proxlighttrinkey_m0.menu.opt.dragons.build.flags.optimize=-Ofast -funroll-loops +adafruit_proxlighttrinkey_m0.menu.usbstack.arduino=Arduino +adafruit_proxlighttrinkey_m0.menu.usbstack.tinyusb=TinyUSB +adafruit_proxlighttrinkey_m0.menu.usbstack.tinyusb.build.flags.usbstack=-DUSE_TINYUSB +adafruit_proxlighttrinkey_m0.menu.debug.off=Off +adafruit_proxlighttrinkey_m0.menu.debug.on=On +adafruit_proxlighttrinkey_m0.menu.debug.on.build.flags.debug=-g + # Adafruit ItsyBitsy M0 (SAMD21) # ------------------------------ diff --git a/bootloaders/neokeytrinkey_m0/bootloader-neokeytrinkey_m0.bin b/bootloaders/neokeytrinkey_m0/bootloader-neokeytrinkey_m0.bin new file mode 100644 index 000000000..ea8af4d4e Binary files /dev/null and b/bootloaders/neokeytrinkey_m0/bootloader-neokeytrinkey_m0.bin differ diff --git a/bootloaders/proxlighttrinkey_m0/bootloader-proxlighttrinkey_m0.bin b/bootloaders/proxlighttrinkey_m0/bootloader-proxlighttrinkey_m0.bin new file mode 100644 index 000000000..7b1a0b938 Binary files /dev/null and b/bootloaders/proxlighttrinkey_m0/bootloader-proxlighttrinkey_m0.bin differ diff --git a/bootloaders/rotarytrinkey_m0/bootloader-rotarytrinkey_m0.bin b/bootloaders/rotarytrinkey_m0/bootloader-rotarytrinkey_m0.bin new file mode 100644 index 000000000..b879d7ef8 Binary files /dev/null and b/bootloaders/rotarytrinkey_m0/bootloader-rotarytrinkey_m0.bin differ diff --git a/bootloaders/slidetrinkey_m0/bootloader-slidetrinkey_m0.bin b/bootloaders/slidetrinkey_m0/bootloader-slidetrinkey_m0.bin new file mode 100644 index 000000000..e894a13e3 Binary files /dev/null and b/bootloaders/slidetrinkey_m0/bootloader-slidetrinkey_m0.bin differ diff --git a/variants/neokeytrinkey_m0/debug_scripts/variant.gdb b/variants/neokeytrinkey_m0/debug_scripts/variant.gdb new file mode 100644 index 000000000..13ee2a173 --- /dev/null +++ b/variants/neokeytrinkey_m0/debug_scripts/variant.gdb @@ -0,0 +1,31 @@ +# +# Arduino Zero OpenOCD script. +# +# Copyright (c) 2014-2015 Arduino LLC. All right reserved. +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +# Define 'reset' command +define reset + +info reg + +break main + +# End of 'reset' command +end + +target remote | openocd -c "interface cmsis-dap" -c "set CHIPNAME at91samd21e18" -f target/at91samdXX.cfg -c "gdb_port pipe; log_output openocd.log" diff --git a/variants/neokeytrinkey_m0/linker_scripts/gcc/flash_with_bootloader.ld b/variants/neokeytrinkey_m0/linker_scripts/gcc/flash_with_bootloader.ld new file mode 100644 index 000000000..357946455 --- /dev/null +++ b/variants/neokeytrinkey_m0/linker_scripts/gcc/flash_with_bootloader.ld @@ -0,0 +1,216 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/* Linker script to configure memory regions. + * Need modifying for a specific board. + * FLASH.ORIGIN: starting address of flash + * FLASH.LENGTH: length of flash + * RAM.ORIGIN: starting address of RAM bank 0 + * RAM.LENGTH: length of RAM bank 0 + */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000+0x2000, LENGTH = 0x00040000-0x2000 /* First 8KB used by bootloader */ + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __text_start__ = .; + + KEEP(*(.sketch_boot)) + + . = ALIGN(0x2000); + KEEP(*(.isr_vector)) + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(16); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + PROVIDE(end = .); + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + __ram_end__ = ORIGIN(RAM) + LENGTH(RAM) -1 ; + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/variants/neokeytrinkey_m0/linker_scripts/gcc/flash_without_bootloader.ld b/variants/neokeytrinkey_m0/linker_scripts/gcc/flash_without_bootloader.ld new file mode 100644 index 000000000..ebeeee37f --- /dev/null +++ b/variants/neokeytrinkey_m0/linker_scripts/gcc/flash_without_bootloader.ld @@ -0,0 +1,214 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/* Linker script to configure memory regions. + * Need modifying for a specific board. + * FLASH.ORIGIN: starting address of flash + * FLASH.LENGTH: length of flash + * RAM.ORIGIN: starting address of RAM bank 0 + * RAM.LENGTH: length of RAM bank 0 + */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __ram_end__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __text_start__ = .; + + KEEP(*(.isr_vector)) + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(16); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + PROVIDE(end = .); + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM) ; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + __ram_end__ = ORIGIN(RAM) + LENGTH(RAM) -1 ; + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/variants/neokeytrinkey_m0/openocd_scripts/neokeytrinkey_m0.cfg b/variants/neokeytrinkey_m0/openocd_scripts/neokeytrinkey_m0.cfg new file mode 100644 index 000000000..e4c3f81dc --- /dev/null +++ b/variants/neokeytrinkey_m0/openocd_scripts/neokeytrinkey_m0.cfg @@ -0,0 +1,28 @@ +# +# Adafruit ItsyBitsy M0 OpenOCD script. +# +# Copyright (c) 2014-2015 Arduino LLC. All right reserved. +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +# chip name +set CHIPNAME at91samd21e18 +set ENDIAN little + +# choose a port here +set telnet_port 0 + +source [find target/at91samdXX.cfg] diff --git a/variants/neokeytrinkey_m0/pins_arduino.h b/variants/neokeytrinkey_m0/pins_arduino.h new file mode 100644 index 000000000..db0e40c3d --- /dev/null +++ b/variants/neokeytrinkey_m0/pins_arduino.h @@ -0,0 +1,21 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +// API compatibility +#include "variant.h" + diff --git a/variants/neokeytrinkey_m0/variant.cpp b/variants/neokeytrinkey_m0/variant.cpp new file mode 100644 index 000000000..e64ad7b21 --- /dev/null +++ b/variants/neokeytrinkey_m0/variant.cpp @@ -0,0 +1,51 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "variant.h" +#include "Arduino.h" +/* + * Pins descriptions + */ +const PinDescription g_APinDescription[]= +{ + // NeoPixel + { PORTA, 15, PIO_DIGITAL, (PIN_ATTR_DIGITAL), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_15 }, + + // Mechanical switch + { PORTA, 28, PIO_DIGITAL, (PIN_ATTR_DIGITAL), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_8 }, + + // Touch pad + { PORTA, 7, PIO_DIGITAL, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG|PIN_ATTR_PWM|PIN_ATTR_TIMER), ADC_Channel7, PWM1_CH1, TCC1_CH1, EXTERNAL_INT_7 }, + + + // USB pins + { PORTA, 28, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB Host enable + { PORTA, 24, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB/DM + { PORTA, 25, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB/DP + + // Fake DAC pin just so we can compile stuff + { PORTA, 2, PIO_ANALOG, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG|PIN_ATTR_PWM|PIN_ATTR_TIMER), ADC_Channel0, PWM2_CH0, TCC2_CH0, EXTERNAL_INT_2 }, // A0 / D0 / DAC +} ; + +const void* g_apTCInstances[TCC_INST_NUM+TC_INST_NUM]={ TCC0, TCC1, TCC2, TC3, TC4, TC5 } ; + +// Multi-serial objects instantiation +SERCOM sercom0( SERCOM0 ) ; +SERCOM sercom1( SERCOM1 ) ; +SERCOM sercom2( SERCOM2 ) ; +SERCOM sercom3( SERCOM3 ) ; diff --git a/variants/neokeytrinkey_m0/variant.h b/variants/neokeytrinkey_m0/variant.h new file mode 100644 index 000000000..e866d8afe --- /dev/null +++ b/variants/neokeytrinkey_m0/variant.h @@ -0,0 +1,171 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef _VARIANT_NEOKEYTRINKEY_ZERO_ +#define _VARIANT_NEOKEYTRINKEY_ZERO_ + +// The definitions here needs a SAMD core >=1.6.10 +#define ARDUINO_SAMD_VARIANT_COMPLIANCE 10610 + +/*---------------------------------------------------------------------------- + * Definitions + *----------------------------------------------------------------------------*/ + +/** Frequency of the board main oscillator */ +#define VARIANT_MAINOSC (32768ul) + +/** Master clock frequency */ +#define VARIANT_MCK (F_CPU) + +/*---------------------------------------------------------------------------- + * Headers + *----------------------------------------------------------------------------*/ + +#include "WVariant.h" + +#ifdef __cplusplus +#include "SERCOM.h" +#include "Uart.h" +#endif // __cplusplus + +#ifdef __cplusplus +extern "C" +{ +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ + +// Number of pins defined in PinDescription array +#define PINS_COUNT (6u) +#define NUM_DIGITAL_PINS (6u) +#define NUM_ANALOG_INPUTS (1u) +#define NUM_ANALOG_OUTPUTS (1u) +#define analogInputToDigitalPin(p) (p) + +#define digitalPinToPort(P) ( &(PORT->Group[g_APinDescription[P].ulPort]) ) +#define digitalPinToBitMask(P) ( 1 << g_APinDescription[P].ulPin ) +//#define analogInPinToBit(P) ( ) +#define portOutputRegister(port) ( &(port->OUT.reg) ) +#define portInputRegister(port) ( &(port->IN.reg) ) +#define portModeRegister(port) ( &(port->DIR.reg) ) +#define digitalPinHasPWM(P) ( g_APinDescription[P].ulPWMChannel != NOT_ON_PWM || g_APinDescription[P].ulTCChannel != NOT_ON_TIMER ) + +/* + * digitalPinToTimer(..) is AVR-specific and is not defined for SAMD + * architecture. If you need to check if a pin supports PWM you must + * use digitalPinHasPWM(..). + * + * https://github.com/arduino/Arduino/issues/1833 + */ +// #define digitalPinToTimer(P) + +// LEDs +#define PIN_NEOPIXEL (0u) +#define NUM_NEOPIXEL (1u) + +#define PIN_SWITCH 1 +#define PIN_TOUCH 2 + +/* + * Analog pins + */ +#define PIN_A0 (6ul) +#define PIN_A1 (2) +#define PIN_DAC0 PIN_A0 + +static const uint8_t A0 = PIN_A0; +static const uint8_t A1 = PIN_A1; + +#define ADC_RESOLUTION 12 + + +/* + * SPI Interfaces + */ +#define SPI_INTERFACES_COUNT 0 + +/* + * Wire Interfaces + */ +#define WIRE_INTERFACES_COUNT 0 + +/* + * USB + */ +#define PIN_USB_HOST_ENABLE (3ul) +#define PIN_USB_DM (4ul) +#define PIN_USB_DP (5ul) +/* + * I2S Interfaces + */ +#define I2S_INTERFACES_COUNT 0 + + +/* + * Serial interfaces + */ + +#ifdef __cplusplus +} +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + +/* ========================= + * ===== SERCOM DEFINITION + * ========================= +*/ +extern SERCOM sercom0; +extern SERCOM sercom1; +extern SERCOM sercom2; +extern SERCOM sercom3; +extern SERCOM sercom4; +extern SERCOM sercom5; + + +#endif + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_MONITOR Serial +// Serial has no physical pins broken out, so it's not listed as HARDWARE port +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif /* _VARIANT_ARDUINO_ZERO_ */ + diff --git a/variants/proxlighttrinkey_m0/debug_scripts/variant.gdb b/variants/proxlighttrinkey_m0/debug_scripts/variant.gdb new file mode 100644 index 000000000..13ee2a173 --- /dev/null +++ b/variants/proxlighttrinkey_m0/debug_scripts/variant.gdb @@ -0,0 +1,31 @@ +# +# Arduino Zero OpenOCD script. +# +# Copyright (c) 2014-2015 Arduino LLC. All right reserved. +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +# Define 'reset' command +define reset + +info reg + +break main + +# End of 'reset' command +end + +target remote | openocd -c "interface cmsis-dap" -c "set CHIPNAME at91samd21e18" -f target/at91samdXX.cfg -c "gdb_port pipe; log_output openocd.log" diff --git a/variants/proxlighttrinkey_m0/linker_scripts/gcc/flash_with_bootloader.ld b/variants/proxlighttrinkey_m0/linker_scripts/gcc/flash_with_bootloader.ld new file mode 100644 index 000000000..357946455 --- /dev/null +++ b/variants/proxlighttrinkey_m0/linker_scripts/gcc/flash_with_bootloader.ld @@ -0,0 +1,216 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/* Linker script to configure memory regions. + * Need modifying for a specific board. + * FLASH.ORIGIN: starting address of flash + * FLASH.LENGTH: length of flash + * RAM.ORIGIN: starting address of RAM bank 0 + * RAM.LENGTH: length of RAM bank 0 + */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000+0x2000, LENGTH = 0x00040000-0x2000 /* First 8KB used by bootloader */ + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __text_start__ = .; + + KEEP(*(.sketch_boot)) + + . = ALIGN(0x2000); + KEEP(*(.isr_vector)) + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(16); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + PROVIDE(end = .); + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + __ram_end__ = ORIGIN(RAM) + LENGTH(RAM) -1 ; + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/variants/proxlighttrinkey_m0/linker_scripts/gcc/flash_without_bootloader.ld b/variants/proxlighttrinkey_m0/linker_scripts/gcc/flash_without_bootloader.ld new file mode 100644 index 000000000..ebeeee37f --- /dev/null +++ b/variants/proxlighttrinkey_m0/linker_scripts/gcc/flash_without_bootloader.ld @@ -0,0 +1,214 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/* Linker script to configure memory regions. + * Need modifying for a specific board. + * FLASH.ORIGIN: starting address of flash + * FLASH.LENGTH: length of flash + * RAM.ORIGIN: starting address of RAM bank 0 + * RAM.LENGTH: length of RAM bank 0 + */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __ram_end__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __text_start__ = .; + + KEEP(*(.isr_vector)) + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(16); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + PROVIDE(end = .); + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM) ; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + __ram_end__ = ORIGIN(RAM) + LENGTH(RAM) -1 ; + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/variants/proxlighttrinkey_m0/openocd_scripts/proxlighttrinkey_m0.cfg b/variants/proxlighttrinkey_m0/openocd_scripts/proxlighttrinkey_m0.cfg new file mode 100644 index 000000000..e4c3f81dc --- /dev/null +++ b/variants/proxlighttrinkey_m0/openocd_scripts/proxlighttrinkey_m0.cfg @@ -0,0 +1,28 @@ +# +# Adafruit ItsyBitsy M0 OpenOCD script. +# +# Copyright (c) 2014-2015 Arduino LLC. All right reserved. +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +# chip name +set CHIPNAME at91samd21e18 +set ENDIAN little + +# choose a port here +set telnet_port 0 + +source [find target/at91samdXX.cfg] diff --git a/variants/proxlighttrinkey_m0/pins_arduino.h b/variants/proxlighttrinkey_m0/pins_arduino.h new file mode 100644 index 000000000..db0e40c3d --- /dev/null +++ b/variants/proxlighttrinkey_m0/pins_arduino.h @@ -0,0 +1,21 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +// API compatibility +#include "variant.h" + diff --git a/variants/proxlighttrinkey_m0/variant.cpp b/variants/proxlighttrinkey_m0/variant.cpp new file mode 100644 index 000000000..da5bd8d4d --- /dev/null +++ b/variants/proxlighttrinkey_m0/variant.cpp @@ -0,0 +1,57 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "variant.h" +#include "Arduino.h" +/* + * Pins descriptions + */ +const PinDescription g_APinDescription[]= +{ + // Fake DAC A0 pin just so we can compile stuff + { PORTA, 2, PIO_ANALOG, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG|PIN_ATTR_PWM|PIN_ATTR_TIMER), ADC_Channel0, PWM2_CH0, TCC2_CH0, EXTERNAL_INT_2 }, // A0 / D0 / DAC + + // touch 1 / A1 + { PORTA, 7, PIO_ANALOG, (PIN_ATTR_ANALOG|PIN_ATTR_PWM|PIN_ATTR_TIMER), ADC_Channel7, PWM1_CH1, TCC1_CH1, EXTERNAL_INT_7 }, // TCC1/WO[1] + // touch 2 / A2 + { PORTA, 3, PIO_ANALOG, (PIN_ATTR_ANALOG), ADC_Channel3, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_3 }, // ADC/AIN[3] + + // NeoPixel / D3 + { PORTA, 15, PIO_TIMER, (PIN_ATTR_DIGITAL|PIN_ATTR_PWM|PIN_ATTR_TIMER), No_ADC_Channel, PWM3_CH1, TC3_CH1, EXTERNAL_INT_15 }, // TC3/WO[1] + + // I2C SDA D4 & SCL D5 + { PORTA, 16, PIO_SERCOM, (PIN_ATTR_DIGITAL|PIN_ATTR_PWM|PIN_ATTR_TIMER_ALT), No_ADC_Channel, PWM0_CH6, TCC0_CH6, EXTERNAL_INT_0 }, // D4 / SDA / PWM + { PORTA, 17, PIO_SERCOM, (PIN_ATTR_DIGITAL|PIN_ATTR_PWM|PIN_ATTR_TIMER_ALT), No_ADC_Channel, PWM0_CH7, TCC0_CH7, EXTERNAL_INT_1 }, // D5 / SCL / PWM + + // Interrupt D6 + { PORTA, 0, PIO_DIGITAL, (PIN_ATTR_DIGITAL|PIN_ATTR_PWM|PIN_ATTR_TIMER), No_ADC_Channel, PWM2_CH0, TCC2_CH0, EXTERNAL_INT_0 }, + + // USB pins + { PORTA, 28, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB Host enable + { PORTA, 24, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB/DM + { PORTA, 25, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB/DP + +} ; + +const void* g_apTCInstances[TCC_INST_NUM+TC_INST_NUM]={ TCC0, TCC1, TCC2, TC3, TC4, TC5 } ; + +// Multi-serial objects instantiation +SERCOM sercom0( SERCOM0 ) ; +SERCOM sercom1( SERCOM1 ) ; +SERCOM sercom2( SERCOM2 ) ; +SERCOM sercom3( SERCOM3 ) ; diff --git a/variants/proxlighttrinkey_m0/variant.h b/variants/proxlighttrinkey_m0/variant.h new file mode 100644 index 000000000..bb9232265 --- /dev/null +++ b/variants/proxlighttrinkey_m0/variant.h @@ -0,0 +1,180 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef _VARIANT_PROXLIGHTTRINKEY_ZERO_ +#define _VARIANT_PROXLIGHTTRINKEY_ZERO_ + +// The definitions here needs a SAMD core >=1.6.10 +#define ARDUINO_SAMD_VARIANT_COMPLIANCE 10610 + +/*---------------------------------------------------------------------------- + * Definitions + *----------------------------------------------------------------------------*/ + +/** Frequency of the board main oscillator */ +#define VARIANT_MAINOSC (32768ul) + +/** Master clock frequency */ +#define VARIANT_MCK (F_CPU) + +/*---------------------------------------------------------------------------- + * Headers + *----------------------------------------------------------------------------*/ + +#include "WVariant.h" + +#ifdef __cplusplus +#include "SERCOM.h" +#include "Uart.h" +#endif // __cplusplus + +#ifdef __cplusplus +extern "C" +{ +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ + +// Number of pins defined in PinDescription array +#define PINS_COUNT (10u) +#define NUM_DIGITAL_PINS (6u) +#define NUM_ANALOG_INPUTS (3u) +#define NUM_ANALOG_OUTPUTS (1u) +#define analogInputToDigitalPin(p) (p) + +#define digitalPinToPort(P) ( &(PORT->Group[g_APinDescription[P].ulPort]) ) +#define digitalPinToBitMask(P) ( 1 << g_APinDescription[P].ulPin ) +//#define analogInPinToBit(P) ( ) +#define portOutputRegister(port) ( &(port->OUT.reg) ) +#define portInputRegister(port) ( &(port->IN.reg) ) +#define portModeRegister(port) ( &(port->DIR.reg) ) +#define digitalPinHasPWM(P) ( g_APinDescription[P].ulPWMChannel != NOT_ON_PWM || g_APinDescription[P].ulTCChannel != NOT_ON_TIMER ) + +/* + * digitalPinToTimer(..) is AVR-specific and is not defined for SAMD + * architecture. If you need to check if a pin supports PWM you must + * use digitalPinHasPWM(..). + * + * https://github.com/arduino/Arduino/issues/1833 + */ +// #define digitalPinToTimer(P) + +// LEDs +#define PIN_NEOPIXEL (3u) +#define NUM_NEOPIXEL (2u) + +// TOUCH PINS +#define PIN_TOUCH1 1 +#define PIN_TOUCH2 2 + +#define PIN_INTERRUPT 6 + +/* + * Analog pins + */ +#define PIN_A0 (0ul) +#define PIN_A1 (1) +#define PIN_A2 (2) +#define PIN_DAC0 PIN_A0 + +static const uint8_t A0 = PIN_A0; +static const uint8_t A1 = PIN_A1; +static const uint8_t A2 = PIN_A2; + +#define ADC_RESOLUTION 12 + + +/* + * SPI Interfaces + */ +#define SPI_INTERFACES_COUNT 0 + +/* + * Wire Interfaces + */ +#define WIRE_INTERFACES_COUNT 1 + +#define PIN_WIRE_SDA (4u) +#define PIN_WIRE_SCL (5u) +#define PERIPH_WIRE sercom1 +#define WIRE_IT_HANDLER SERCOM1_Handler + +static const uint8_t SDA = PIN_WIRE_SDA; +static const uint8_t SCL = PIN_WIRE_SCL; + +/* + * USB + */ +#define PIN_USB_HOST_ENABLE (5ul) +#define PIN_USB_DM (6ul) +#define PIN_USB_DP (7ul) +/* + * I2S Interfaces + */ +#define I2S_INTERFACES_COUNT 0 + + +#ifdef __cplusplus +} +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + +/* ========================= + * ===== SERCOM DEFINITION + * ========================= +*/ +extern SERCOM sercom0; +extern SERCOM sercom1; +extern SERCOM sercom2; +extern SERCOM sercom3; +extern SERCOM sercom4; +extern SERCOM sercom5; + + +#endif + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_MONITOR Serial +// Serial has no physical pins broken out, so it's not listed as HARDWARE port +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif /* _VARIANT_ARDUINO_ZERO_ */ + diff --git a/variants/rotarytrinkey_m0/debug_scripts/variant.gdb b/variants/rotarytrinkey_m0/debug_scripts/variant.gdb new file mode 100644 index 000000000..13ee2a173 --- /dev/null +++ b/variants/rotarytrinkey_m0/debug_scripts/variant.gdb @@ -0,0 +1,31 @@ +# +# Arduino Zero OpenOCD script. +# +# Copyright (c) 2014-2015 Arduino LLC. All right reserved. +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +# Define 'reset' command +define reset + +info reg + +break main + +# End of 'reset' command +end + +target remote | openocd -c "interface cmsis-dap" -c "set CHIPNAME at91samd21e18" -f target/at91samdXX.cfg -c "gdb_port pipe; log_output openocd.log" diff --git a/variants/rotarytrinkey_m0/linker_scripts/gcc/flash_with_bootloader.ld b/variants/rotarytrinkey_m0/linker_scripts/gcc/flash_with_bootloader.ld new file mode 100644 index 000000000..357946455 --- /dev/null +++ b/variants/rotarytrinkey_m0/linker_scripts/gcc/flash_with_bootloader.ld @@ -0,0 +1,216 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/* Linker script to configure memory regions. + * Need modifying for a specific board. + * FLASH.ORIGIN: starting address of flash + * FLASH.LENGTH: length of flash + * RAM.ORIGIN: starting address of RAM bank 0 + * RAM.LENGTH: length of RAM bank 0 + */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000+0x2000, LENGTH = 0x00040000-0x2000 /* First 8KB used by bootloader */ + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __text_start__ = .; + + KEEP(*(.sketch_boot)) + + . = ALIGN(0x2000); + KEEP(*(.isr_vector)) + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(16); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + PROVIDE(end = .); + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + __ram_end__ = ORIGIN(RAM) + LENGTH(RAM) -1 ; + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/variants/rotarytrinkey_m0/linker_scripts/gcc/flash_without_bootloader.ld b/variants/rotarytrinkey_m0/linker_scripts/gcc/flash_without_bootloader.ld new file mode 100644 index 000000000..ebeeee37f --- /dev/null +++ b/variants/rotarytrinkey_m0/linker_scripts/gcc/flash_without_bootloader.ld @@ -0,0 +1,214 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/* Linker script to configure memory regions. + * Need modifying for a specific board. + * FLASH.ORIGIN: starting address of flash + * FLASH.LENGTH: length of flash + * RAM.ORIGIN: starting address of RAM bank 0 + * RAM.LENGTH: length of RAM bank 0 + */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __ram_end__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __text_start__ = .; + + KEEP(*(.isr_vector)) + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(16); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + PROVIDE(end = .); + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM) ; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + __ram_end__ = ORIGIN(RAM) + LENGTH(RAM) -1 ; + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/variants/rotarytrinkey_m0/openocd_scripts/rotarytrinkey_m0.cfg b/variants/rotarytrinkey_m0/openocd_scripts/rotarytrinkey_m0.cfg new file mode 100644 index 000000000..e4c3f81dc --- /dev/null +++ b/variants/rotarytrinkey_m0/openocd_scripts/rotarytrinkey_m0.cfg @@ -0,0 +1,28 @@ +# +# Adafruit ItsyBitsy M0 OpenOCD script. +# +# Copyright (c) 2014-2015 Arduino LLC. All right reserved. +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +# chip name +set CHIPNAME at91samd21e18 +set ENDIAN little + +# choose a port here +set telnet_port 0 + +source [find target/at91samdXX.cfg] diff --git a/variants/rotarytrinkey_m0/pins_arduino.h b/variants/rotarytrinkey_m0/pins_arduino.h new file mode 100644 index 000000000..db0e40c3d --- /dev/null +++ b/variants/rotarytrinkey_m0/pins_arduino.h @@ -0,0 +1,21 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +// API compatibility +#include "variant.h" + diff --git a/variants/rotarytrinkey_m0/variant.cpp b/variants/rotarytrinkey_m0/variant.cpp new file mode 100644 index 000000000..e3c824ff5 --- /dev/null +++ b/variants/rotarytrinkey_m0/variant.cpp @@ -0,0 +1,68 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "variant.h" +#include "Arduino.h" +/* + * Pins descriptions + */ +const PinDescription g_APinDescription[]= +{ + // NeoPixel + { PORTA, 1, PIO_DIGITAL, (PIN_ATTR_DIGITAL), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_1 }, + + // Encoder pin 1 + { PORTA, 0, PIO_DIGITAL, (PIN_ATTR_DIGITAL|PIN_ATTR_PWM|PIN_ATTR_TIMER), No_ADC_Channel, PWM2_CH0, TCC2_CH0, EXTERNAL_INT_0 }, + + // Encoder pin 2 + { PORTA, 4, PIO_DIGITAL, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG|PIN_ATTR_PWM|PIN_ATTR_TIMER), ADC_Channel4, PWM0_CH0, TCC0_CH0, EXTERNAL_INT_4 }, + + // Encoder switch + { PORTA, 27, PIO_DIGITAL, (PIN_ATTR_DIGITAL), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_15 }, + + // Touch pad + { PORTA, 6, PIO_DIGITAL, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG|PIN_ATTR_PWM|PIN_ATTR_TIMER), ADC_Channel6, PWM1_CH0, TCC1_CH0, EXTERNAL_INT_6 }, + + + // USB pins + { PORTA, 28, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB Host enable + { PORTA, 24, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB/DM + { PORTA, 25, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB/DP + + // Fake DAC pin just so we can compile stuff + { PORTA, 2, PIO_ANALOG, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG|PIN_ATTR_PWM|PIN_ATTR_TIMER), ADC_Channel0, PWM2_CH0, TCC2_CH0, EXTERNAL_INT_2 }, // A0 / D0 / DAC +} ; + +const void* g_apTCInstances[TCC_INST_NUM+TC_INST_NUM]={ TCC0, TCC1, TCC2, TC3, TC4, TC5 } ; + +// Multi-serial objects instantiation +SERCOM sercom0( SERCOM0 ) ; +SERCOM sercom1( SERCOM1 ) ; +SERCOM sercom2( SERCOM2 ) ; +SERCOM sercom3( SERCOM3 ) ; + +/* + * Serial interfaces + + +// Serial1 +#define PIN_SERIAL1_TX (6ul) +#define PIN_SERIAL1_RX (7ul) +#define PAD_SERIAL1_TX (UART_TX_PAD_2) +#define PAD_SERIAL1_RX (SERCOM_RX_PAD_3) + */ diff --git a/variants/rotarytrinkey_m0/variant.h b/variants/rotarytrinkey_m0/variant.h new file mode 100644 index 000000000..8490ee360 --- /dev/null +++ b/variants/rotarytrinkey_m0/variant.h @@ -0,0 +1,184 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef _VARIANT_ROTARYTRINKEY_ZERO_ +#define _VARIANT_ROTARYTRINKEY_ZERO_ + +// The definitions here needs a SAMD core >=1.6.10 +#define ARDUINO_SAMD_VARIANT_COMPLIANCE 10610 + +/*---------------------------------------------------------------------------- + * Definitions + *----------------------------------------------------------------------------*/ + +/** Frequency of the board main oscillator */ +#define VARIANT_MAINOSC (32768ul) + +/** Master clock frequency */ +#define VARIANT_MCK (F_CPU) + +/*---------------------------------------------------------------------------- + * Headers + *----------------------------------------------------------------------------*/ + +#include "WVariant.h" + +#ifdef __cplusplus +#include "SERCOM.h" +#include "Uart.h" +#endif // __cplusplus + +#ifdef __cplusplus +extern "C" +{ +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ + +// Number of pins defined in PinDescription array +#define PINS_COUNT (9u) +#define NUM_DIGITAL_PINS (5u) +#define NUM_ANALOG_INPUTS (2u) +#define NUM_ANALOG_OUTPUTS (1u) +#define analogInputToDigitalPin(p) (p) + +#define digitalPinToPort(P) ( &(PORT->Group[g_APinDescription[P].ulPort]) ) +#define digitalPinToBitMask(P) ( 1 << g_APinDescription[P].ulPin ) +//#define analogInPinToBit(P) ( ) +#define portOutputRegister(port) ( &(port->OUT.reg) ) +#define portInputRegister(port) ( &(port->IN.reg) ) +#define portModeRegister(port) ( &(port->DIR.reg) ) +#define digitalPinHasPWM(P) ( g_APinDescription[P].ulPWMChannel != NOT_ON_PWM || g_APinDescription[P].ulTCChannel != NOT_ON_TIMER ) + +/* + * digitalPinToTimer(..) is AVR-specific and is not defined for SAMD + * architecture. If you need to check if a pin supports PWM you must + * use digitalPinHasPWM(..). + * + * https://github.com/arduino/Arduino/issues/1833 + */ +// #define digitalPinToTimer(P) + +// LEDs +#define PIN_NEOPIXEL (0u) +#define NUM_NEOPIXEL (1u) + +// ENCODER +#define PIN_ENCODER_A 1 +#define PIN_ENCODER_B 2 +#define PIN_ENCODER_SWITCH 3 + +#define PIN_TOUCH 4 + +/* + * Analog pins + */ +#define PIN_A0 (8ul) +#define PIN_A1 (2) +#define PIN_A2 (4) +#define PIN_DAC0 PIN_A0 + +static const uint8_t A0 = PIN_A0; +static const uint8_t A1 = PIN_A1; +static const uint8_t A2 = PIN_A2; + +#define ADC_RESOLUTION 12 + + +/* + * SPI Interfaces + */ +#define SPI_INTERFACES_COUNT 0 + +/* + * Wire Interfaces + */ +#define WIRE_INTERFACES_COUNT 0 + +/* + * USB + */ +#define PIN_USB_HOST_ENABLE (5ul) +#define PIN_USB_DM (6ul) +#define PIN_USB_DP (7ul) +/* + * I2S Interfaces + */ +#define I2S_INTERFACES_COUNT 0 + + +/* + * Serial interfaces + */ + +// Serial1 +#define PIN_SERIAL1_TX (2ul) // D2 / PA04 / SERCOM 0.0 +#define PIN_SERIAL1_RX (4ul) // D2 / PA06 / SERCOM 0.2 +#define PAD_SERIAL1_TX (UART_TX_PAD_0) +#define PAD_SERIAL1_RX (SERCOM_RX_PAD_2) + + +#ifdef __cplusplus +} +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + +/* ========================= + * ===== SERCOM DEFINITION + * ========================= +*/ +extern SERCOM sercom0; +extern SERCOM sercom1; +extern SERCOM sercom2; +extern SERCOM sercom3; +extern SERCOM sercom4; +extern SERCOM sercom5; + + +#endif + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_MONITOR Serial +// Serial has no physical pins broken out, so it's not listed as HARDWARE port +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif /* _VARIANT_ARDUINO_ZERO_ */ + diff --git a/variants/slidetrinkey_m0/debug_scripts/variant.gdb b/variants/slidetrinkey_m0/debug_scripts/variant.gdb new file mode 100644 index 000000000..13ee2a173 --- /dev/null +++ b/variants/slidetrinkey_m0/debug_scripts/variant.gdb @@ -0,0 +1,31 @@ +# +# Arduino Zero OpenOCD script. +# +# Copyright (c) 2014-2015 Arduino LLC. All right reserved. +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +# Define 'reset' command +define reset + +info reg + +break main + +# End of 'reset' command +end + +target remote | openocd -c "interface cmsis-dap" -c "set CHIPNAME at91samd21e18" -f target/at91samdXX.cfg -c "gdb_port pipe; log_output openocd.log" diff --git a/variants/slidetrinkey_m0/linker_scripts/gcc/flash_with_bootloader.ld b/variants/slidetrinkey_m0/linker_scripts/gcc/flash_with_bootloader.ld new file mode 100644 index 000000000..357946455 --- /dev/null +++ b/variants/slidetrinkey_m0/linker_scripts/gcc/flash_with_bootloader.ld @@ -0,0 +1,216 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/* Linker script to configure memory regions. + * Need modifying for a specific board. + * FLASH.ORIGIN: starting address of flash + * FLASH.LENGTH: length of flash + * RAM.ORIGIN: starting address of RAM bank 0 + * RAM.LENGTH: length of RAM bank 0 + */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000+0x2000, LENGTH = 0x00040000-0x2000 /* First 8KB used by bootloader */ + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __text_start__ = .; + + KEEP(*(.sketch_boot)) + + . = ALIGN(0x2000); + KEEP(*(.isr_vector)) + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(16); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + PROVIDE(end = .); + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + __ram_end__ = ORIGIN(RAM) + LENGTH(RAM) -1 ; + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/variants/slidetrinkey_m0/linker_scripts/gcc/flash_without_bootloader.ld b/variants/slidetrinkey_m0/linker_scripts/gcc/flash_without_bootloader.ld new file mode 100644 index 000000000..ebeeee37f --- /dev/null +++ b/variants/slidetrinkey_m0/linker_scripts/gcc/flash_without_bootloader.ld @@ -0,0 +1,214 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/* Linker script to configure memory regions. + * Need modifying for a specific board. + * FLASH.ORIGIN: starting address of flash + * FLASH.LENGTH: length of flash + * RAM.ORIGIN: starting address of RAM bank 0 + * RAM.LENGTH: length of RAM bank 0 + */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __ram_end__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __text_start__ = .; + + KEEP(*(.isr_vector)) + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(16); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + PROVIDE(end = .); + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM) ; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + __ram_end__ = ORIGIN(RAM) + LENGTH(RAM) -1 ; + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/variants/slidetrinkey_m0/openocd_scripts/slidetrinkey_m0.cfg b/variants/slidetrinkey_m0/openocd_scripts/slidetrinkey_m0.cfg new file mode 100644 index 000000000..e4c3f81dc --- /dev/null +++ b/variants/slidetrinkey_m0/openocd_scripts/slidetrinkey_m0.cfg @@ -0,0 +1,28 @@ +# +# Adafruit ItsyBitsy M0 OpenOCD script. +# +# Copyright (c) 2014-2015 Arduino LLC. All right reserved. +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +# chip name +set CHIPNAME at91samd21e18 +set ENDIAN little + +# choose a port here +set telnet_port 0 + +source [find target/at91samdXX.cfg] diff --git a/variants/slidetrinkey_m0/pins_arduino.h b/variants/slidetrinkey_m0/pins_arduino.h new file mode 100644 index 000000000..db0e40c3d --- /dev/null +++ b/variants/slidetrinkey_m0/pins_arduino.h @@ -0,0 +1,21 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +// API compatibility +#include "variant.h" + diff --git a/variants/slidetrinkey_m0/variant.cpp b/variants/slidetrinkey_m0/variant.cpp new file mode 100644 index 000000000..88a348db7 --- /dev/null +++ b/variants/slidetrinkey_m0/variant.cpp @@ -0,0 +1,48 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "variant.h" +#include "Arduino.h" +/* + * Pins descriptions + */ +const PinDescription g_APinDescription[]= +{ + // Potentiometer + { PORTA, 2, PIO_ANALOG, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG|PIN_ATTR_PWM|PIN_ATTR_TIMER), ADC_Channel0, PWM2_CH0, TCC2_CH0, EXTERNAL_INT_2 }, + + // Touch pad + { PORTA, 7, PIO_ANALOG, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG|PIN_ATTR_PWM|PIN_ATTR_TIMER), ADC_Channel7, PWM1_CH1, TCC1_CH1, EXTERNAL_INT_7 }, + + // NeoPixel + { PORTA, 4, PIO_DIGITAL, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG|PIN_ATTR_PWM|PIN_ATTR_TIMER), ADC_Channel4, PWM0_CH0, TCC0_CH0, EXTERNAL_INT_4 }, + + // USB pins + { PORTA, 28, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB Host enable + { PORTA, 24, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB/DM + { PORTA, 25, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB/DP + +} ; + +const void* g_apTCInstances[TCC_INST_NUM+TC_INST_NUM]={ TCC0, TCC1, TCC2, TC3, TC4, TC5 } ; + +// Multi-serial objects instantiation +SERCOM sercom0( SERCOM0 ) ; +SERCOM sercom1( SERCOM1 ) ; +SERCOM sercom2( SERCOM2 ) ; +SERCOM sercom3( SERCOM3 ) ; diff --git a/variants/slidetrinkey_m0/variant.h b/variants/slidetrinkey_m0/variant.h new file mode 100644 index 000000000..0348b6f3a --- /dev/null +++ b/variants/slidetrinkey_m0/variant.h @@ -0,0 +1,174 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef _VARIANT_SLIDETRINKEY_ZERO_ +#define _VARIANT_SLIDETRINKEY_ZERO_ + +// The definitions here needs a SAMD core >=1.6.10 +#define ARDUINO_SAMD_VARIANT_COMPLIANCE 10610 + +/*---------------------------------------------------------------------------- + * Definitions + *----------------------------------------------------------------------------*/ + +/** Frequency of the board main oscillator */ +#define VARIANT_MAINOSC (32768ul) + +/** Master clock frequency */ +#define VARIANT_MCK (F_CPU) + +/*---------------------------------------------------------------------------- + * Headers + *----------------------------------------------------------------------------*/ + +#include "WVariant.h" + +#ifdef __cplusplus +#include "SERCOM.h" +#include "Uart.h" +#endif // __cplusplus + +#ifdef __cplusplus +extern "C" +{ +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ + +// Number of pins defined in PinDescription array +#define PINS_COUNT (6u) +#define NUM_DIGITAL_PINS (3u) +#define NUM_ANALOG_INPUTS (3u) +#define NUM_ANALOG_OUTPUTS (1u) +#define analogInputToDigitalPin(p) (p) + +#define digitalPinToPort(P) ( &(PORT->Group[g_APinDescription[P].ulPort]) ) +#define digitalPinToBitMask(P) ( 1 << g_APinDescription[P].ulPin ) +//#define analogInPinToBit(P) ( ) +#define portOutputRegister(port) ( &(port->OUT.reg) ) +#define portInputRegister(port) ( &(port->IN.reg) ) +#define portModeRegister(port) ( &(port->DIR.reg) ) +#define digitalPinHasPWM(P) ( g_APinDescription[P].ulPWMChannel != NOT_ON_PWM || g_APinDescription[P].ulTCChannel != NOT_ON_TIMER ) + +/* + * digitalPinToTimer(..) is AVR-specific and is not defined for SAMD + * architecture. If you need to check if a pin supports PWM you must + * use digitalPinHasPWM(..). + * + * https://github.com/arduino/Arduino/issues/1833 + */ +// #define digitalPinToTimer(P) + +// LEDs +#define PIN_NEOPIXEL (2u) +#define NUM_NEOPIXEL (2u) + +// POT +#define PIN_POTENTIOMETER (0u) + +/* + * Analog pins + */ +#define PIN_A0 (0ul) +#define PIN_A1 (1ul) +#define PIN_A2 (2ul) +#define PIN_DAC0 PIN_A0 + +static const uint8_t A0 = PIN_A0; +static const uint8_t A1 = PIN_A1; +static const uint8_t A2 = PIN_A2; + +#define ADC_RESOLUTION 12 + + +/* + * SPI Interfaces + */ +#define SPI_INTERFACES_COUNT 0 + +/* + * Wire Interfaces + */ +#define WIRE_INTERFACES_COUNT 0 + +/* + * USB + */ +#define PIN_USB_HOST_ENABLE (3ul) +#define PIN_USB_DM (4ul) +#define PIN_USB_DP (5ul) +/* + * I2S Interfaces + */ +#define I2S_INTERFACES_COUNT 0 + + +/* + * Serial interfaces + */ + + +#ifdef __cplusplus +} +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + +/* ========================= + * ===== SERCOM DEFINITION + * ========================= +*/ +extern SERCOM sercom0; +extern SERCOM sercom1; +extern SERCOM sercom2; +extern SERCOM sercom3; +extern SERCOM sercom4; +extern SERCOM sercom5; + + +#endif + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_MONITOR Serial +// Serial has no physical pins broken out, so it's not listed as HARDWARE port +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif /* _VARIANT_ARDUINO_ZERO_ */ +