pre-commit fixes

Author: RetiredWizard

adafruit_esp32spi/adafruit_esp32spi_wifimanager.py

@@ -67,8 +67,8 @@ def __init__(
         self._ap_index = 0
 
         # Check for WPA2 Enterprise keys in the secrets dictionary and load them if they exist
-        self.ent_ssid = secrets.get("ent_ssid",secrets["ssid"])
-        self.ent_ident = secrets.get("ent_ident","")
+        self.ent_ssid = secrets.get("ent_ssid", secrets["ssid"])
+        self.ent_ident = secrets.get("ent_ident", "")
         self.ent_user = secrets.get("ent_user")
         self.ent_password = secrets.get("ent_password")
 

examples/esp32spi_aio_post.py

@@ -2,9 +2,9 @@
 # SPDX-License-Identifier: MIT
 
 import time
+from os import getenv
 import board
 import busio
-from os import getenv
 from digitalio import DigitalInOut
 import neopixel
 from adafruit_esp32spi import adafruit_esp32spi
@@ -16,14 +16,14 @@
 # tokens used by this Demo: CIRCUITPY_WIFI_SSID, CIRCUITPY_WIFI_PASSWORD
 #                           CIRCUITPY_AIO_USERNAME, CIRCUITPY_AIO_KEY
 secrets = {}
-for token in ["ssid","password"]:
-    if getenv("CIRCUITPY_WIFI_"+token.upper()):
-        secrets[token] = getenv("CIRCUITPY_WIFI_"+token.upper())
-for token in ["aio_username","aio_key"]:
-    if getenv("CIRCUITPY_"+token.upper()):
-        secrets[token] = getenv("CIRCUITPY_"+token.upper())
+for token in ["ssid", "password"]:
+    if getenv("CIRCUITPY_WIFI_" + token.upper()):
+        secrets[token] = getenv("CIRCUITPY_WIFI_" + token.upper())
+for token in ["aio_username", "aio_key"]:
+    if getenv("CIRCUITPY_" + token.upper()):
+        secrets[token] = getenv("CIRCUITPY_" + token.upper())
 
-if secrets == {}:
+if not secrets:
     try:
         # Fallback on secrets.py until depreciation is over and option is removed
         from secrets import secrets
@@ -42,15 +42,13 @@
 # esp32_reset = DigitalInOut(board.D5)
 
 # Secondary (SCK1) SPI used to connect to WiFi board on Arduino Nano Connect RP2040
-if 'SCK1' in dir(board):
+if "SCK1" in dir(board):
     spi = busio.SPI(board.SCK1, board.MOSI1, board.MISO1)
 else:
     spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
 esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
 """Use below for Most Boards"""
-status_light = neopixel.NeoPixel(
-    board.NEOPIXEL, 1, brightness=0.2
-)
+status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
 """Uncomment below for ItsyBitsy M4"""
 # status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
 """Uncomment below for an externally defined RGB LED (including Arduino Nano Connect)"""

examples/esp32spi_cheerlights.py

@@ -2,9 +2,9 @@
 # SPDX-License-Identifier: MIT
 
 import time
+from os import getenv
 import board
 import busio
-from os import getenv
 from digitalio import DigitalInOut
 
 import neopixel
@@ -17,7 +17,7 @@
 # tokens used by this Demo: CIRCUITPY_WIFI_SSID, CIRCUITPY_WIFI_PASSWORD
 secrets = {
     "ssid": getenv("CIRCUITPY_WIFI_SSID"),
-    "password": getenv("CIRCUITPY_WIFI_PASSWORD")
+    "password": getenv("CIRCUITPY_WIFI_PASSWORD"),
 }
 if secrets == {"ssid": None, "password": None}:
     try:
@@ -43,15 +43,13 @@
 # esp32_reset = DigitalInOut(board.D5)
 
 # Secondary (SCK1) SPI used to connect to WiFi board on Arduino Nano Connect RP2040
-if 'SCK1' in dir(board):
+if "SCK1" in dir(board):
     spi = busio.SPI(board.SCK1, board.MOSI1, board.MISO1)
 else:
     spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
 esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
 """Use below for Most Boards"""
-status_light = neopixel.NeoPixel(
-    board.NEOPIXEL, 1, brightness=0.2
-)
+status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
 """Uncomment below for ItsyBitsy M4"""
 # status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
 """Uncomment below for an externally defined RGB LED (including Arduino Nano Connect)"""

examples/esp32spi_ipconfig.py

@@ -2,9 +2,9 @@
 # SPDX-License-Identifier: MIT
 
 import time
+from os import getenv
 import board
 import busio
-from os import getenv
 from digitalio import DigitalInOut
 import adafruit_esp32spi.adafruit_esp32spi_socket as socket
 from adafruit_esp32spi import adafruit_esp32spi
@@ -13,7 +13,7 @@
 # tokens used by this Demo: CIRCUITPY_WIFI_SSID, CIRCUITPY_WIFI_PASSWORD
 secrets = {
     "ssid": getenv("CIRCUITPY_WIFI_SSID"),
-    "password": getenv("CIRCUITPY_WIFI_PASSWORD")
+    "password": getenv("CIRCUITPY_WIFI_PASSWORD"),
 }
 if secrets == {"ssid": None, "password": None}:
     try:
@@ -45,7 +45,7 @@
 # esp32_reset = DigitalInOut(board.D5)
 
 # Secondary (SCK1) SPI used to connect to WiFi board on Arduino Nano Connect RP2040
-if 'SCK1' in dir(board):
+if "SCK1" in dir(board):
     spi = busio.SPI(board.SCK1, board.MOSI1, board.MISO1)
 else:
     spi = busio.SPI(board.SCK, board.MOSI, board.MISO)

examples/esp32spi_localtime.py

@@ -2,9 +2,9 @@
 # SPDX-License-Identifier: MIT
 
 import time
+from os import getenv
 import board
 import busio
-from os import getenv
 from digitalio import DigitalInOut
 import neopixel
 import rtc
@@ -15,7 +15,7 @@
 # tokens used by this Demo: CIRCUITPY_WIFI_SSID, CIRCUITPY_WIFI_PASSWORD
 secrets = {
     "ssid": getenv("CIRCUITPY_WIFI_SSID"),
-    "password": getenv("CIRCUITPY_WIFI_PASSWORD")
+    "password": getenv("CIRCUITPY_WIFI_PASSWORD"),
 }
 if secrets == {"ssid": None, "password": None}:
     try:
@@ -40,16 +40,14 @@
 # esp32_reset = DigitalInOut(board.D5)
 
 # Secondary (SCK1) SPI used to connect to WiFi board on Arduino Nano Connect RP2040
-if 'SCK1' in dir(board):
+if "SCK1" in dir(board):
     spi = busio.SPI(board.SCK1, board.MOSI1, board.MISO1)
 else:
     spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
 esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
 
 """Use below for Most Boards"""
-status_light = neopixel.NeoPixel(
-    board.NEOPIXEL, 1, brightness=0.2
-)
+status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
 """Uncomment below for ItsyBitsy M4"""
 # status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
 """Uncomment below for an externally defined RGB LED (including Arduino Nano Connect)"""

examples/esp32spi_simpletest.py

@@ -1,9 +1,9 @@
 # SPDX-FileCopyrightText: 2019 ladyada for Adafruit Industries
 # SPDX-License-Identifier: MIT
 
+from os import getenv
 import board
 import busio
-from os import getenv
 from digitalio import DigitalInOut
 import adafruit_requests as requests
 import adafruit_esp32spi.adafruit_esp32spi_socket as socket
@@ -13,7 +13,7 @@
 # tokens used by this Demo: CIRCUITPY_WIFI_SSID, CIRCUITPY_WIFI_PASSWORD
 secrets = {
     "ssid": getenv("CIRCUITPY_WIFI_SSID"),
-    "password": getenv("CIRCUITPY_WIFI_PASSWORD")
+    "password": getenv("CIRCUITPY_WIFI_PASSWORD"),
 }
 if secrets == {"ssid": None, "password": None}:
     try:
@@ -51,7 +51,7 @@
 # esp32_reset = DigitalInOut(board.D5)
 
 # Secondary (SCK1) SPI used to connect to WiFi board on Arduino Nano Connect RP2040
-if 'SCK1' in dir(board):
+if "SCK1" in dir(board):
     spi = busio.SPI(board.SCK1, board.MOSI1, board.MISO1)
 else:
     spi = busio.SPI(board.SCK, board.MOSI, board.MISO)

examples/esp32spi_simpletest_rp2040.py

@@ -1,9 +1,9 @@
 # SPDX-FileCopyrightText: 2019 ladyada for Adafruit Industries
 # SPDX-License-Identifier: MIT
 
+from os import getenv
 import board
 import busio
-from os import getenv
 from digitalio import DigitalInOut
 import adafruit_requests as requests
 import adafruit_esp32spi.adafruit_esp32spi_socket as socket
@@ -13,7 +13,7 @@
 # tokens used by this Demo: CIRCUITPY_WIFI_SSID, CIRCUITPY_WIFI_PASSWORD
 secrets = {
     "ssid": getenv("CIRCUITPY_WIFI_SSID"),
-    "password": getenv("CIRCUITPY_WIFI_PASSWORD")
+    "password": getenv("CIRCUITPY_WIFI_PASSWORD"),
 }
 if secrets == {"ssid": None, "password": None}:
     try:

examples/esp32spi_tcp_client.py

@@ -12,7 +12,7 @@
 # tokens used by this Demo: CIRCUITPY_WIFI_SSID, CIRCUITPY_WIFI_PASSWORD
 secrets = {
     "ssid": getenv("CIRCUITPY_WIFI_SSID"),
-    "password": getenv("CIRCUITPY_WIFI_PASSWORD")
+    "password": getenv("CIRCUITPY_WIFI_PASSWORD"),
 }
 if secrets == {"ssid": None, "password": None}:
     try:
@@ -28,7 +28,7 @@
 PORT = 80
 
 # Secondary (SCK1) SPI used to connect to WiFi board on Arduino Nano Connect RP2040
-if 'SCK1' in dir(board):
+if "SCK1" in dir(board):
     spi = busio.SPI(board.SCK1, board.MOSI1, board.MISO1)
 else:
     if "SPI" in dir(board):

examples/esp32spi_udp_client.py

@@ -3,9 +3,9 @@
 
 import struct
 import time
+from os import getenv
 import board
 import busio
-from os import getenv
 from digitalio import DigitalInOut
 from adafruit_esp32spi import adafruit_esp32spi
 import adafruit_esp32spi.adafruit_esp32spi_socket as socket
@@ -14,7 +14,7 @@
 # tokens used by this Demo: CIRCUITPY_WIFI_SSID, CIRCUITPY_WIFI_PASSWORD
 secrets = {
     "ssid": getenv("CIRCUITPY_WIFI_SSID"),
-    "password": getenv("CIRCUITPY_WIFI_PASSWORD")
+    "password": getenv("CIRCUITPY_WIFI_PASSWORD"),
 }
 if secrets == {"ssid": None, "password": None}:
     try:
@@ -31,7 +31,7 @@
 NTP_TO_UNIX_EPOCH = 2208988800  # 1970-01-01 00:00:00
 
 # Secondary (SCK1) SPI used to connect to WiFi board on Arduino Nano Connect RP2040
-if 'SCK1' in dir(board):
+if "SCK1" in dir(board):
     spi = busio.SPI(board.SCK1, board.MOSI1, board.MISO1)
 else:
     if "SPI" in dir(board):

examples/esp32spi_wpa2ent_aio_post.py

@@ -2,9 +2,9 @@
 # SPDX-License-Identifier: MIT
 
 import time
+from os import getenv
 import board
 import busio
-from os import getenv
 from digitalio import DigitalInOut
 import neopixel
 from adafruit_esp32spi import adafruit_esp32spi
@@ -17,13 +17,13 @@
 #                           CIRCUITPY_WIFI_ENT_SSID, CIRCUITPY_WIFI_ENT_PASSWORD,
 #                           CIRCUITPY_WIFI_ENT_USER, CIRCUITPY_WIFI_ENT_IDENT
 secrets = {}
-for token in ["ssid","password","user","ident"]:
-    if getenv("CIRCUITPY_WIFI_ENT_"+token.upper()):
-        secrets[token] = getenv("CIRCUITPY_WIFI_"+token.upper())
-for token in ["aio_username","aio_key"]:
-    if getenv("CIRCUITPY_"+token.upper()):
-        secrets[token] = getenv("CIRCUITPY_"+token.upper())
-if secrets == {}:
+for token in ["ssid", "password", "user", "ident"]:
+    if getenv("CIRCUITPY_WIFI_ENT_" + token.upper()):
+        secrets[token] = getenv("CIRCUITPY_WIFI_" + token.upper())
+for token in ["aio_username", "aio_key"]:
+    if getenv("CIRCUITPY_" + token.upper()):
+        secrets[token] = getenv("CIRCUITPY_" + token.upper())
+if not secrets:
     try:
         # Fallback on secrets.py until depreciation is over and option is removed
         from secrets import secrets  # pylint: disable=no-name-in-module
@@ -44,16 +44,14 @@
     esp32_reset = DigitalInOut(board.D5)
 
 # Secondary (SCK1) SPI used to connect to WiFi board on Arduino Nano Connect RP2040
-if 'SCK1' in dir(board):
+if "SCK1" in dir(board):
     spi = busio.SPI(board.SCK1, board.MOSI1, board.MISO1)
 else:
     spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
 esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)
 
 """Use below for Most Boards"""
-status_light = neopixel.NeoPixel(
-    board.NEOPIXEL, 1, brightness=0.2
-)
+status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
 """Uncomment below for ItsyBitsy M4"""
 # status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
 """Uncomment below for an externally defined RGB LED (including Arduino Nano Connect)"""

examples/esp32spi_wpa2ent_simpletest.py

@@ -31,6 +31,7 @@ def normalize(v):
         normalize(version1) < normalize(version2)
     )
 
+
 print("ESP32 SPI WPA2 Enterprise test")
 
 # ESP32 setup
@@ -46,7 +47,7 @@ def normalize(v):
     esp32_reset = DigitalInOut(board.D5)
 
 # Secondary (SCK1) SPI used to connect to WiFi board on Arduino Nano Connect RP2040
-if 'SCK1' in dir(board):
+if "SCK1" in dir(board):
     spi = busio.SPI(board.SCK1, board.MOSI1, board.MISO1)
 else:
     spi = busio.SPI(board.SCK, board.MOSI, board.MISO)