diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..55f127b --- /dev/null +++ b/.gitignore @@ -0,0 +1,12 @@ +*.mpy +.idea +__pycache__ +_build +*.pyc +.env +build* +bundles +*.DS_Store +.eggs +dist +**/*.egg-info \ No newline at end of file diff --git a/.pylintrc b/.pylintrc new file mode 100644 index 0000000..039eaec --- /dev/null +++ b/.pylintrc @@ -0,0 +1,433 @@ +[MASTER] + +# A comma-separated list of package or module names from where C extensions may +# be loaded. Extensions are loading into the active Python interpreter and may +# run arbitrary code +extension-pkg-whitelist= + +# Add files or directories to the blacklist. They should be base names, not +# paths. +ignore=CVS + +# Add files or directories matching the regex patterns to the blacklist. The +# regex matches against base names, not paths. +ignore-patterns= + +# Python code to execute, usually for sys.path manipulation such as +# pygtk.require(). +#init-hook= + +# Use multiple processes to speed up Pylint. +# jobs=1 +jobs=2 + +# List of plugins (as comma separated values of python modules names) to load, +# usually to register additional checkers. +load-plugins= + +# Pickle collected data for later comparisons. +persistent=yes + +# Specify a configuration file. +#rcfile= + +# Allow loading of arbitrary C extensions. Extensions are imported into the +# active Python interpreter and may run arbitrary code. +unsafe-load-any-extension=no + + +[MESSAGES CONTROL] + +# Only show warnings with the listed confidence levels. Leave empty to show +# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED +confidence= + +# Disable the message, report, category or checker with the given id(s). You +# can either give multiple identifiers separated by comma (,) or put this +# option multiple times (only on the command line, not in the configuration +# file where it should appear only once).You can also use "--disable=all" to +# disable everything first and then reenable specific checks. For example, if +# you want to run only the similarities checker, you can use "--disable=all +# --enable=similarities". If you want to run only the classes checker, but have +# no Warning level messages displayed, use"--disable=all --enable=classes +# --disable=W" +# disable=import-error,print-statement,parameter-unpacking,unpacking-in-except,old-raise-syntax,backtick,long-suffix,old-ne-operator,old-octal-literal,import-star-module-level,raw-checker-failed,bad-inline-option,locally-disabled,locally-enabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,apply-builtin,basestring-builtin,buffer-builtin,cmp-builtin,coerce-builtin,execfile-builtin,file-builtin,long-builtin,raw_input-builtin,reduce-builtin,standarderror-builtin,unicode-builtin,xrange-builtin,coerce-method,delslice-method,getslice-method,setslice-method,no-absolute-import,old-division,dict-iter-method,dict-view-method,next-method-called,metaclass-assignment,indexing-exception,raising-string,reload-builtin,oct-method,hex-method,nonzero-method,cmp-method,input-builtin,round-builtin,intern-builtin,unichr-builtin,map-builtin-not-iterating,zip-builtin-not-iterating,range-builtin-not-iterating,filter-builtin-not-iterating,using-cmp-argument,eq-without-hash,div-method,idiv-method,rdiv-method,exception-message-attribute,invalid-str-codec,sys-max-int,bad-python3-import,deprecated-string-function,deprecated-str-translate-call +disable=print-statement,parameter-unpacking,unpacking-in-except,old-raise-syntax,backtick,long-suffix,old-ne-operator,old-octal-literal,import-star-module-level,raw-checker-failed,bad-inline-option,locally-disabled,locally-enabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,apply-builtin,basestring-builtin,buffer-builtin,cmp-builtin,coerce-builtin,execfile-builtin,file-builtin,long-builtin,raw_input-builtin,reduce-builtin,standarderror-builtin,unicode-builtin,xrange-builtin,coerce-method,delslice-method,getslice-method,setslice-method,no-absolute-import,old-division,dict-iter-method,dict-view-method,next-method-called,metaclass-assignment,indexing-exception,raising-string,reload-builtin,oct-method,hex-method,nonzero-method,cmp-method,input-builtin,round-builtin,intern-builtin,unichr-builtin,map-builtin-not-iterating,zip-builtin-not-iterating,range-builtin-not-iterating,filter-builtin-not-iterating,using-cmp-argument,eq-without-hash,div-method,idiv-method,rdiv-method,exception-message-attribute,invalid-str-codec,sys-max-int,bad-python3-import,deprecated-string-function,deprecated-str-translate-call,import-error + +# Enable the message, report, category or checker with the given id(s). You can +# either give multiple identifier separated by comma (,) or put this option +# multiple time (only on the command line, not in the configuration file where +# it should appear only once). See also the "--disable" option for examples. +enable= + + +[REPORTS] + +# Python expression which should return a note less than 10 (10 is the highest +# note). You have access to the variables errors warning, statement which +# respectively contain the number of errors / warnings messages and the total +# number of statements analyzed. This is used by the global evaluation report +# (RP0004). +evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10) + +# Template used to display messages. This is a python new-style format string +# used to format the message information. See doc for all details +#msg-template= + +# Set the output format. Available formats are text, parseable, colorized, json +# and msvs (visual studio).You can also give a reporter class, eg +# mypackage.mymodule.MyReporterClass. +output-format=text + +# Tells whether to display a full report or only the messages +reports=no + +# Activate the evaluation score. +score=yes + + +[REFACTORING] + +# Maximum number of nested blocks for function / method body +max-nested-blocks=5 + + +[LOGGING] + +# Logging modules to check that the string format arguments are in logging +# function parameter format +logging-modules=logging + + +[SPELLING] + +# Spelling dictionary name. Available dictionaries: none. To make it working +# install python-enchant package. +spelling-dict= + +# List of comma separated words that should not be checked. +spelling-ignore-words= + +# A path to a file that contains private dictionary; one word per line. +spelling-private-dict-file= + +# Tells whether to store unknown words to indicated private dictionary in +# --spelling-private-dict-file option instead of raising a message. +spelling-store-unknown-words=no + + +[MISCELLANEOUS] + +# List of note tags to take in consideration, separated by a comma. +# notes=FIXME,XXX,TODO +notes=FIXME,XXX + + +[TYPECHECK] + +# List of decorators that produce context managers, such as +# contextlib.contextmanager. Add to this list to register other decorators that +# produce valid context managers. +contextmanager-decorators=contextlib.contextmanager + +# List of members which are set dynamically and missed by pylint inference +# system, and so shouldn't trigger E1101 when accessed. Python regular +# expressions are accepted. +generated-members= + +# Tells whether missing members accessed in mixin class should be ignored. A +# mixin class is detected if its name ends with "mixin" (case insensitive). +ignore-mixin-members=yes + +# This flag controls whether pylint should warn about no-member and similar +# checks whenever an opaque object is returned when inferring. The inference +# can return multiple potential results while evaluating a Python object, but +# some branches might not be evaluated, which results in partial inference. In +# that case, it might be useful to still emit no-member and other checks for +# the rest of the inferred objects. +ignore-on-opaque-inference=yes + +# List of class names for which member attributes should not be checked (useful +# for classes with dynamically set attributes). This supports the use of +# qualified names. +ignored-classes=optparse.Values,thread._local,_thread._local + +# List of module names for which member attributes should not be checked +# (useful for modules/projects where namespaces are manipulated during runtime +# and thus existing member attributes cannot be deduced by static analysis. It +# supports qualified module names, as well as Unix pattern matching. +ignored-modules=board + +# Show a hint with possible names when a member name was not found. The aspect +# of finding the hint is based on edit distance. +missing-member-hint=yes + +# The minimum edit distance a name should have in order to be considered a +# similar match for a missing member name. +missing-member-hint-distance=1 + +# The total number of similar names that should be taken in consideration when +# showing a hint for a missing member. +missing-member-max-choices=1 + + +[VARIABLES] + +# List of additional names supposed to be defined in builtins. Remember that +# you should avoid to define new builtins when possible. +additional-builtins= + +# Tells whether unused global variables should be treated as a violation. +allow-global-unused-variables=yes + +# List of strings which can identify a callback function by name. A callback +# name must start or end with one of those strings. +callbacks=cb_,_cb + +# A regular expression matching the name of dummy variables (i.e. expectedly +# not used). +dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_ + +# Argument names that match this expression will be ignored. Default to name +# with leading underscore +ignored-argument-names=_.*|^ignored_|^unused_ + +# Tells whether we should check for unused import in __init__ files. +init-import=no + +# List of qualified module names which can have objects that can redefine +# builtins. +redefining-builtins-modules=six.moves,future.builtins + + +[FORMAT] + +# Expected format of line ending, e.g. empty (any line ending), LF or CRLF. +# expected-line-ending-format= +expected-line-ending-format=LF + +# Regexp for a line that is allowed to be longer than the limit. +ignore-long-lines=^\s*(# )??$ + +# Number of spaces of indent required inside a hanging or continued line. +indent-after-paren=4 + +# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1 +# tab). +indent-string=' ' + +# Maximum number of characters on a single line. +max-line-length=100 + +# Maximum number of lines in a module +max-module-lines=1000 + +# List of optional constructs for which whitespace checking is disabled. `dict- +# separator` is used to allow tabulation in dicts, etc.: {1 : 1,\n222: 2}. +# `trailing-comma` allows a space between comma and closing bracket: (a, ). +# `empty-line` allows space-only lines. +no-space-check=trailing-comma,dict-separator + +# Allow the body of a class to be on the same line as the declaration if body +# contains single statement. +single-line-class-stmt=no + +# Allow the body of an if to be on the same line as the test if there is no +# else. +single-line-if-stmt=no + + +[SIMILARITIES] + +# Ignore comments when computing similarities. +ignore-comments=yes + +# Ignore docstrings when computing similarities. +ignore-docstrings=yes + +# Ignore imports when computing similarities. +ignore-imports=no + +# Minimum lines number of a similarity. +min-similarity-lines=4 + + +[BASIC] + +# Naming hint for argument names +argument-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$ + +# Regular expression matching correct argument names +argument-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$ + +# Naming hint for attribute names +attr-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$ + +# Regular expression matching correct attribute names +attr-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$ + +# Bad variable names which should always be refused, separated by a comma +bad-names=foo,bar,baz,toto,tutu,tata + +# Naming hint for class attribute names +class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$ + +# Regular expression matching correct class attribute names +class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$ + +# Naming hint for class names +# class-name-hint=[A-Z_][a-zA-Z0-9]+$ +class-name-hint=[A-Z_][a-zA-Z0-9_]+$ + +# Regular expression matching correct class names +# class-rgx=[A-Z_][a-zA-Z0-9]+$ +class-rgx=[A-Z_][a-zA-Z0-9_]+$ + +# Naming hint for constant names +const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$ + +# Regular expression matching correct constant names +const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$ + +# Minimum line length for functions/classes that require docstrings, shorter +# ones are exempt. +docstring-min-length=-1 + +# Naming hint for function names +function-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$ + +# Regular expression matching correct function names +function-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$ + +# Good variable names which should always be accepted, separated by a comma +# good-names=i,j,k,ex,Run,_ +good-names=r,g,b,w,i,j,k,n,x,y,z,ex,ok,Run,_ + +# Include a hint for the correct naming format with invalid-name +include-naming-hint=no + +# Naming hint for inline iteration names +inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$ + +# Regular expression matching correct inline iteration names +inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$ + +# Naming hint for method names +method-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$ + +# Regular expression matching correct method names +method-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$ + +# Naming hint for module names +module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$ + +# Regular expression matching correct module names +module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$ + +# Colon-delimited sets of names that determine each other's naming style when +# the name regexes allow several styles. +name-group= + +# Regular expression which should only match function or class names that do +# not require a docstring. +no-docstring-rgx=^_ + +# List of decorators that produce properties, such as abc.abstractproperty. Add +# to this list to register other decorators that produce valid properties. +property-classes=abc.abstractproperty + +# Naming hint for variable names +variable-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$ + +# Regular expression matching correct variable names +variable-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$ + + +[IMPORTS] + +# Allow wildcard imports from modules that define __all__. +allow-wildcard-with-all=no + +# Analyse import fallback blocks. This can be used to support both Python 2 and +# 3 compatible code, which means that the block might have code that exists +# only in one or another interpreter, leading to false positives when analysed. +analyse-fallback-blocks=no + +# Deprecated modules which should not be used, separated by a comma +deprecated-modules=optparse,tkinter.tix + +# Create a graph of external dependencies in the given file (report RP0402 must +# not be disabled) +ext-import-graph= + +# Create a graph of every (i.e. internal and external) dependencies in the +# given file (report RP0402 must not be disabled) +import-graph= + +# Create a graph of internal dependencies in the given file (report RP0402 must +# not be disabled) +int-import-graph= + +# Force import order to recognize a module as part of the standard +# compatibility libraries. +known-standard-library= + +# Force import order to recognize a module as part of a third party library. +known-third-party=enchant + + +[CLASSES] + +# List of method names used to declare (i.e. assign) instance attributes. +defining-attr-methods=__init__,__new__,setUp + +# List of member names, which should be excluded from the protected access +# warning. +exclude-protected=_asdict,_fields,_replace,_source,_make + +# List of valid names for the first argument in a class method. +valid-classmethod-first-arg=cls + +# List of valid names for the first argument in a metaclass class method. +valid-metaclass-classmethod-first-arg=mcs + + +[DESIGN] + +# Maximum number of arguments for function / method +max-args=5 + +# Maximum number of attributes for a class (see R0902). +# max-attributes=7 +max-attributes=11 + +# Maximum number of boolean expressions in a if statement +max-bool-expr=5 + +# Maximum number of branch for function / method body +max-branches=12 + +# Maximum number of locals for function / method body +max-locals=15 + +# Maximum number of parents for a class (see R0901). +max-parents=7 + +# Maximum number of public methods for a class (see R0904). +max-public-methods=20 + +# Maximum number of return / yield for function / method body +max-returns=6 + +# Maximum number of statements in function / method body +max-statements=50 + +# Minimum number of public methods for a class (see R0903). +min-public-methods=1 + + +[EXCEPTIONS] + +# Exceptions that will emit a warning when being caught. Defaults to +# "Exception" +overgeneral-exceptions=Exception diff --git a/.readthedocs.yml b/.readthedocs.yml new file mode 100644 index 0000000..f4243ad --- /dev/null +++ b/.readthedocs.yml @@ -0,0 +1,3 @@ +python: + version: 3 +requirements_file: requirements.txt diff --git a/.travis.yml b/.travis.yml new file mode 100644 index 0000000..bc7f86b --- /dev/null +++ b/.travis.yml @@ -0,0 +1,42 @@ +# This is a common .travis.yml for generating library release zip files for +# CircuitPython library releases using circuitpython-build-tools. +# See https://github.com/adafruit/circuitpython-build-tools for detailed setup +# instructions. + +dist: xenial +language: python +python: + - "3.6" + +cache: + pip: true + +deploy: + - provider: releases + api_key: "$GITHUB_TOKEN" + file_glob: true + file: "$TRAVIS_BUILD_DIR/bundles/*" + skip_cleanup: true + overwrite: true + on: + tags: true + # TODO: Use 'travis encrypt --com -r adafruit/' to generate + # the encrypted password for adafruit-travis. Paste result below. + - provider: pypi + user: adafruit-travis + password: + secure: #-- PASTE ENCRYPTED PASSWORD HERE --# + on: + tags: true + condition: $DEPLOY_PYPI = "true" + +install: + - pip install -r requirements.txt + - pip install circuitpython-build-tools Sphinx sphinx-rtd-theme + - pip install --force-reinstall pylint==1.9.2 + +script: + - pylint adafruit_azureiot.py + - ([[ ! -d "examples" ]] || pylint --disable=missing-docstring,invalid-name,bad-whitespace examples/*.py) + - circuitpython-build-bundles --filename_prefix adafruit-circuitpython-azureiot --library_location . + - cd docs && sphinx-build -E -W -b html . _build/html && cd .. diff --git a/CODE_OF_CONDUCT.md b/CODE_OF_CONDUCT.md new file mode 100644 index 0000000..7ca3a1d --- /dev/null +++ b/CODE_OF_CONDUCT.md @@ -0,0 +1,127 @@ +# Adafruit Community Code of Conduct + +## Our Pledge + +In the interest of fostering an open and welcoming environment, we as +contributors and leaders pledge to making participation in our project and +our community a harassment-free experience for everyone, regardless of age, body +size, disability, ethnicity, gender identity and expression, level or type of +experience, education, socio-economic status, nationality, personal appearance, +race, religion, or sexual identity and orientation. + +## Our Standards + +We are committed to providing a friendly, safe and welcoming environment for +all. + +Examples of behavior that contributes to creating a positive environment +include: + +* Be kind and courteous to others +* Using welcoming and inclusive language +* Being respectful of differing viewpoints and experiences +* Collaborating with other community members +* Gracefully accepting constructive criticism +* Focusing on what is best for the community +* Showing empathy towards other community members + +Examples of unacceptable behavior by participants include: + +* The use of sexualized language or imagery and sexual attention or advances +* The use of inappropriate images, including in a community member's avatar +* The use of inappropriate language, including in a community member's nickname +* Any spamming, flaming, baiting or other attention-stealing behavior +* Excessive or unwelcome helping; answering outside the scope of the question + asked +* Trolling, insulting/derogatory comments, and personal or political attacks +* Public or private harassment +* Publishing others' private information, such as a physical or electronic + address, without explicit permission +* Other conduct which could reasonably be considered inappropriate + +The goal of the standards and moderation guidelines outlined here is to build +and maintain a respectful community. We ask that you don’t just aim to be +"technically unimpeachable", but rather try to be your best self. + +We value many things beyond technical expertise, including collaboration and +supporting others within our community. Providing a positive experience for +other community members can have a much more significant impact than simply +providing the correct answer. + +## Our Responsibilities + +Project leaders are responsible for clarifying the standards of acceptable +behavior and are expected to take appropriate and fair corrective action in +response to any instances of unacceptable behavior. + +Project leaders have the right and responsibility to remove, edit, or +reject messages, comments, commits, code, issues, and other contributions +that are not aligned to this Code of Conduct, or to ban temporarily or +permanently any community member for other behaviors that they deem +inappropriate, threatening, offensive, or harmful. + +## Moderation + +Instances of behaviors that violate the Adafruit Community Code of Conduct +may be reported by any member of the community. Community members are +encouraged to report these situations, including situations they witness +involving other community members. + +You may report in the following ways: + +In any situation, you may send an email to . + +On the Adafruit Discord, you may send an open message from any channel +to all Community Helpers by tagging @community moderators. You may also send an +open message from any channel, or a direct message to @kattni#1507, +@tannewt#4653, @Dan Halbert#1614, @cater#2442, @sommersoft#0222, or +@Andon#8175. + +Email and direct message reports will be kept confidential. + +In situations on Discord where the issue is particularly egregious, possibly +illegal, requires immediate action, or violates the Discord terms of service, +you should also report the message directly to Discord. + +These are the steps for upholding our community’s standards of conduct. + +1. Any member of the community may report any situation that violates the +Adafruit Community Code of Conduct. All reports will be reviewed and +investigated. +2. If the behavior is an egregious violation, the community member who +committed the violation may be banned immediately, without warning. +3. Otherwise, moderators will first respond to such behavior with a warning. +4. Moderators follow a soft "three strikes" policy - the community member may +be given another chance, if they are receptive to the warning and change their +behavior. +5. If the community member is unreceptive or unreasonable when warned by a +moderator, or the warning goes unheeded, they may be banned for a first or +second offense. Repeated offenses will result in the community member being +banned. + +## Scope + +This Code of Conduct and the enforcement policies listed above apply to all +Adafruit Community venues. This includes but is not limited to any community +spaces (both public and private), the entire Adafruit Discord server, and +Adafruit GitHub repositories. Examples of Adafruit Community spaces include +but are not limited to meet-ups, audio chats on the Adafruit Discord, or +interaction at a conference. + +This Code of Conduct applies both within project spaces and in public spaces +when an individual is representing the project or its community. As a community +member, you are representing our community, and are expected to behave +accordingly. + +## Attribution + +This Code of Conduct is adapted from the [Contributor Covenant][homepage], +version 1.4, available at +, +and the [Rust Code of Conduct](https://www.rust-lang.org/en-US/conduct.html). + +For other projects adopting the Adafruit Community Code of +Conduct, please contact the maintainers of those projects for enforcement. +If you wish to use this code of conduct for your own project, consider +explicitly mentioning your moderation policy or making a copy with your +own moderation policy so as to avoid confusion. diff --git a/LICENSE b/LICENSE new file mode 100644 index 0000000..d4fbf1d --- /dev/null +++ b/LICENSE @@ -0,0 +1,21 @@ +The MIT License (MIT) + +Copyright (c) 2019 Brent Rubell for Adafruit Industries + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. diff --git a/README.md b/README.md deleted file mode 100644 index 66d9665..0000000 --- a/README.md +++ /dev/null @@ -1,2 +0,0 @@ -# Adafruit_CircuitPython_AzureIoT -Access to Microsoft Azure IoT device, messaging, and job services from CircuitPython! diff --git a/README.rst b/README.rst new file mode 100644 index 0000000..a4702e4 --- /dev/null +++ b/README.rst @@ -0,0 +1,123 @@ +Adafruit_CircuitPython_AzureIoT +================================ + +.. image:: https://readthedocs.org/projects/adafruit-circuitpython-azureiot/badge/?version=latest + :target: https://circuitpython.readthedocs.io/projects/azureiot/en/latest/ + :alt: Documentation Status + +.. image:: https://img.shields.io/discord/327254708534116352.svg + :target: https://discord.gg/nBQh6qu + :alt: Discord + +.. image:: https://travis-ci.com/adafruit/Adafruit_CircuitPython_AzureIoT.svg?branch=master + :target: https://travis-ci.com/adafruit/Adafruit_CircuitPython_AzureIoT + :alt: Build Status + +Access to `Microsoft Azure IoT `_ from a CircuitPython device. This library can perform device +messaging services (cloud-to-device, device-to-cloud), device services, and job services. + +Dependencies +============= +This driver depends on: + +* `Adafruit CircuitPython `_ + +Please ensure all dependencies are available on the CircuitPython filesystem. +This is easily achieved by downloading +`the Adafruit library and driver bundle `_. + +Usage Example +============= + +Create an instance of an Azure IoT Hub (you'll need your SAS Token). + +.. code-block:: python + + my_hub = IOT_HUB(wifi, 'Azure_IOT_Hub_Name', 'Azure_IOT_Hub_SAS_Token', 'Azure_Device_Identifier') + +Send a device-to-cloud message + +.. code-block:: python + + my_hub.send_device_message('Hello Azure IoT!') + +Enumerate all devices on an Azure IOT Hub + +.. code-block:: python + + hub_devices = my_hub.get_devices() + +Get information about the current device on an Azure IoT Hub + +.. code-block:: python + + device_info = my_hub.get_device() + +Get information about the current device's device twin + +.. code-block:: python + + twin_info = my_hub.get_device_twin() + +Update the current device's device twin properties + +.. code-block:: python + + my_hub.update_device_twin(device_properties) + +Contributing +============ + +Contributions are welcome! Please read our `Code of Conduct +`_ +before contributing to help this project stay welcoming. + +Building locally +================ + +Zip release files +----------------- + +To build this library locally you'll need to install the +`circuitpython-build-tools `_ package. + +.. code-block:: shell + + python3 -m venv .env + source .env/bin/activate + pip install circuitpython-build-tools + +Once installed, make sure you are in the virtual environment: + +.. code-block:: shell + + source .env/bin/activate + +Then run the build: + +.. code-block:: shell + + circuitpython-build-bundles --filename_prefix adafruit-circuitpython-azureiot --library_location . + +Sphinx documentation +----------------------- + +Sphinx is used to build the documentation based on rST files and comments in the code. First, +install dependencies (feel free to reuse the virtual environment from above): + +.. code-block:: shell + + python3 -m venv .env + source .env/bin/activate + pip install Sphinx sphinx-rtd-theme + +Now, once you have the virtual environment activated: + +.. code-block:: shell + + cd docs + sphinx-build -E -W -b html . _build/html + +This will output the documentation to ``docs/_build/html``. Open the index.html in your browser to +view them. It will also (due to -W) error out on any warning like Travis will. This is a good way to +locally verify it will pass. diff --git a/adafruit_azureiot.py b/adafruit_azureiot.py new file mode 100644 index 0000000..1c50fcd --- /dev/null +++ b/adafruit_azureiot.py @@ -0,0 +1,245 @@ +# The MIT License (MIT) +# +# Copyright (c) 2019 Brent Rubell for Adafruit Industries +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to deal +# in the Software without restriction, including without limitation the rights +# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +# copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +# THE SOFTWARE. +""" +`adafruit_azureiot` +================================================================================ + +Microsoft Azure IoT for CircuitPython + +* Author(s): Brent Rubell + +Implementation Notes +-------------------- + +**Software and Dependencies:** + +* Adafruit CircuitPython firmware for the supported boards: + https://github.com/adafruit/circuitpython/releases + +* Adafruit's Bus Device library: https://github.com/adafruit/Adafruit_CircuitPython_BusDevice +* Adafruit's ESP32SPI library: https://github.com/adafruit/Adafruit_CircuitPython_ESP32SPI +""" + +__version__ = "0.0.0-auto.0" +__repo__ = "https://github.com/adafruit/Adafruit_CircuitPython_AzureIoT.git" + +AZ_API_VER = "2018-06-30" # Azure URI API Version Identifier +AZURE_HTTP_ERROR_CODES = [400, 401, 404, 403, 412, 429, 500] # Azure HTTP Status Codes + +class IOT_Hub: + """ + Provides access to a Microsoft Azure IoT Hub. + https://docs.microsoft.com/en-us/rest/api/iothub/ + """ + def __init__(self, wifi_manager, iot_hub_name, sas_token, device_id): + """ Creates an instance of an Azure IoT Hub Client. + :param wifi_manager: WiFiManager object from ESPSPI_WiFiManager. + :param str iot_hub_name: Name of your IoT Hub. + :param str sas_token: Azure IoT Hub SAS Token Identifier. + :param str device_id: Unique Azure IoT Device Identifier. + """ + _wifi_type = str(type(wifi_manager)) + if 'ESPSPI_WiFiManager' in _wifi_type: + self._wifi = wifi_manager + else: + raise TypeError("This library requires a WiFiManager object.") + self._iot_hub_url = "https://{0}.azure-devices.net".format(iot_hub_name) + self._sas_token = sas_token + self._device_id = device_id + self._azure_header = {"Authorization":self._sas_token} + + @property + def device_id(self): + """Returns the current device identifier""" + return self._device_id + + @device_id.setter + def device_id(self, device_identifier): + """Sets the current device identifier + :param str device_identifier: Unique device identifier. + """ + self._device_id = device_identifier + + @staticmethod + def _parse_http_status(status_code, status_reason): + """Parses status code, throws error based on Azure IoT Common Error Codes. + :param int status_code: HTTP status code. + :param str status_reason: Description of HTTP status. + """ + for error in AZURE_HTTP_ERROR_CODES: + if error == status_code: + raise TypeError("Error {0}: {1}".format(status_code, status_reason)) + + # Cloud-to-Device Messaging + def get_hub_message(self): + """Returns a message from a Microsoft Azure IoT Hub (Cloud-to-Device), or -1 + if the message queue is empty. + NOTE: HTTP Cloud-to-Device messages are throttled. Poll every 25+ minutes. + """ + reject_message = True + # get a device-bound notification + path = "{0}/devices/{1}/messages/deviceBound?api-version={2}".format(self._iot_hub_url, + self._device_id, + AZ_API_VER) + data = self._get(path, is_c2d=True) + if data == 204: # device's message queue is empty + return -1 + etag = data[1]['etag'] + if etag: # either complete or nack the message + reject_message = False + path_complete = "{0}/devices/{1}/messages/deviceBound/{2}?api-version={3}".format( + self._iot_hub_url, self._device_id, etag.strip('\'"'), AZ_API_VER) + if reject_message: + path_complete += '&reject' + del_status = self._delete(path_complete) + if del_status == 204: + return data[0] + return -1 + + # Device-to-Cloud Messaging + def send_device_message(self, message): + """Sends a device-to-cloud message. + :param string message: Message to send to Azure IoT. + """ + path = "{0}/devices/{1}/messages/events?api-version={2}".format(self._iot_hub_url, + self._device_id, AZ_API_VER) + self._post(path, message, return_response=False) + + # Device Twin + def get_device_twin(self): + """Returns the device's device twin information in JSON format. + """ + path = "{0}/twins/{1}?api-version={2}".format(self._iot_hub_url, + self._device_id, AZ_API_VER) + return self._get(path) + + def update_device_twin(self, properties): + """Updates tags and desired properties of the device's device twin. + :param str properties: Device Twin Properties + (https://docs.microsoft.com/en-us/rest/api/iothub/service/updatetwin#twinproperties) + """ + path = "{0}/twins/{1}?api-version={2}".format(self._iot_hub_url, + self._device_id, AZ_API_VER) + return self._patch(path, properties) + + def replace_device_twin(self, properties): + """Replaces tags and desired properties of a device twin. + :param str properties: Device Twin Properties. + """ + path = "{0}/twins/{1}?api-version-{2}".format(self._iot_hub_url, + self._device_id, AZ_API_VER) + return self._put(path, properties) + + # IoT Hub Service + def get_devices(self): + """Enumerate devices from the identity registry of the IoT Hub. + """ + path = "{0}/devices/?api-version={1}".format(self._iot_hub_url, AZ_API_VER) + return self._get(path) + + def get_device(self): + """Gets device information from the identity + registry of an IoT Hub. + """ + path = "{0}/devices/{1}?api-version={2}".format(self._iot_hub_url, + self._device_id, AZ_API_VER) + return self._get(path) + + # HTTP Helper Methods + def _post(self, path, payload, return_response=True): + """HTTP POST + :param str path: Formatted Azure IOT Hub Path. + :param str payload: JSON-formatted Data Payload. + """ + response = self._wifi.post( + path, + json=payload, + headers=self._azure_header) + self._parse_http_status(response.status_code, response.reason) + if return_response: + return response.json() + return response.text + + def _get(self, path, is_c2d=False): + """HTTP GET + :param str path: Formatted Azure IOT Hub Path. + :param bool is_c2d: Cloud-to-device get request. + """ + response = self._wifi.get( + path, + headers=self._azure_header) + status_code = response.status_code + if is_c2d: + if status_code == 200: + data = response.text + headers = response.headers + response.close() + return data, headers + response.close() + return status_code + json = response.json() + response.close() + return json + + def _delete(self, path, etag=None): + """HTTP DELETE + :param str path: Formatted Azure IOT Hub Path. + """ + if etag: + data_headers = {"Authorization":self._sas_token, "If-Match":'"%s"'%etag} + else: + data_headers = self._azure_header + response = self._wifi.delete( + path, + headers=data_headers) + self._parse_http_status(response.status_code, response.reason) + status_code = response.status_code + response.close() + return status_code + + def _patch(self, path, payload): + """HTTP PATCH + :param str path: Formatted Azure IOT Hub Path. + :param str payload: JSON-formatted payload. + """ + response = self._wifi.patch( + path, + json=payload, + headers=self._azure_header) + self._parse_http_status(response.status_code, response.reason) + json_data = response.json() + response.close() + return json_data + + def _put(self, path, payload=None): + """HTTP PUT + :param str path: Formatted Azure IOT Hub Path. + :param str payload: JSON-formatted payload. + """ + response = self._wifi.put( + path, + json=payload, + headers=self._azure_header) + self._parse_http_status(response.status_code, response.reason) + json_data = response.json() + response.close() + return json_data diff --git a/docs/_static/favicon.ico b/docs/_static/favicon.ico new file mode 100644 index 0000000..5aca983 Binary files /dev/null and b/docs/_static/favicon.ico differ diff --git a/docs/api.rst b/docs/api.rst new file mode 100644 index 0000000..46c69ff --- /dev/null +++ b/docs/api.rst @@ -0,0 +1,8 @@ + +.. If you created a package, create one automodule per module in the package. + +.. If your library file(s) are nested in a directory (e.g. /adafruit_foo/foo.py) +.. use this format as the module name: "adafruit_foo.foo" + +.. automodule:: adafruit_azureiot + :members: diff --git a/docs/conf.py b/docs/conf.py new file mode 100644 index 0000000..e88b191 --- /dev/null +++ b/docs/conf.py @@ -0,0 +1,160 @@ +# -*- coding: utf-8 -*- + +import os +import sys +sys.path.insert(0, os.path.abspath('..')) + +# -- General configuration ------------------------------------------------ + +# Add any Sphinx extension module names here, as strings. They can be +# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom +# ones. +extensions = [ + 'sphinx.ext.autodoc', + 'sphinx.ext.intersphinx', + 'sphinx.ext.napoleon', + 'sphinx.ext.todo', +] + +# TODO: Please Read! +# Uncomment the below if you use native CircuitPython modules such as +# digitalio, micropython and busio. List the modules you use. Without it, the +# autodoc module docs will fail to generate with a warning. +# autodoc_mock_imports = ["digitalio", "busio"] + + +intersphinx_mapping = {'python': ('https://docs.python.org/3.4', None),'CircuitPython': ('https://circuitpython.readthedocs.io/en/latest/', None)} + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +source_suffix = '.rst' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = u'Adafruit AzureIoT Library' +copyright = u'2019 Brent Rubell' +author = u'Brent Rubell' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# The short X.Y version. +version = u'1.0' +# The full version, including alpha/beta/rc tags. +release = u'1.0' + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +# +# This is also used if you do content translation via gettext catalogs. +# Usually you set "language" from the command line for these cases. +language = None + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +# This patterns also effect to html_static_path and html_extra_path +exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store', '.env', 'CODE_OF_CONDUCT.md'] + +# The reST default role (used for this markup: `text`) to use for all +# documents. +# +default_role = "any" + +# If true, '()' will be appended to :func: etc. cross-reference text. +# +add_function_parentheses = True + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# If true, `todo` and `todoList` produce output, else they produce nothing. +todo_include_todos = False + +# If this is True, todo emits a warning for each TODO entries. The default is False. +todo_emit_warnings = True + +napoleon_numpy_docstring = False + +# -- Options for HTML output ---------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. +# +on_rtd = os.environ.get('READTHEDOCS', None) == 'True' + +if not on_rtd: # only import and set the theme if we're building docs locally + try: + import sphinx_rtd_theme + html_theme = 'sphinx_rtd_theme' + html_theme_path = [sphinx_rtd_theme.get_html_theme_path(), '.'] + except: + html_theme = 'default' + html_theme_path = ['.'] +else: + html_theme_path = ['.'] + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". +html_static_path = ['_static'] + +# The name of an image file (relative to this directory) to use as a favicon of +# the docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +# +html_favicon = '_static/favicon.ico' + +# Output file base name for HTML help builder. +htmlhelp_basename = 'AdafruitAzureiotLibrarydoc' + +# -- Options for LaTeX output --------------------------------------------- + +latex_elements = { + # The paper size ('letterpaper' or 'a4paper'). + # + # 'papersize': 'letterpaper', + + # The font size ('10pt', '11pt' or '12pt'). + # + # 'pointsize': '10pt', + + # Additional stuff for the LaTeX preamble. + # + # 'preamble': '', + + # Latex figure (float) alignment + # + # 'figure_align': 'htbp', +} + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, +# author, documentclass [howto, manual, or own class]). +latex_documents = [ + (master_doc, 'AdafruitAzureIoTLibrary.tex', u'AdafruitAzureIoT Library Documentation', + author, 'manual'), +] + +# -- Options for manual page output --------------------------------------- + +# One entry per manual page. List of tuples +# (source start file, name, description, authors, manual section). +man_pages = [ + (master_doc, 'AdafruitAzureIoTlibrary', u'Adafruit AzureIoT Library Documentation', + [author], 1) +] + +# -- Options for Texinfo output ------------------------------------------- + +# Grouping the document tree into Texinfo files. List of tuples +# (source start file, target name, title, author, +# dir menu entry, description, category) +texinfo_documents = [ + (master_doc, 'AdafruitAzureIoTLibrary', u'Adafruit AzureIoT Library Documentation', + author, 'AdafruitAzureIoTLibrary', 'One line description of project.', + 'Miscellaneous'), +] diff --git a/docs/examples.rst b/docs/examples.rst new file mode 100644 index 0000000..839a280 --- /dev/null +++ b/docs/examples.rst @@ -0,0 +1,8 @@ +Simple test +------------ + +Ensure your device works with this simple test. + +.. literalinclude:: ../examples/azureiot_simpletest.py + :caption: examples/azureiot_simpletest.py + :linenos: diff --git a/docs/index.rst b/docs/index.rst new file mode 100644 index 0000000..07e5390 --- /dev/null +++ b/docs/index.rst @@ -0,0 +1,45 @@ +.. include:: ../README.rst + +Table of Contents +================= + +.. toctree:: + :maxdepth: 4 + :hidden: + + self + +.. toctree:: + :caption: Examples + + examples + +.. toctree:: + :caption: API Reference + :maxdepth: 3 + + api + +.. toctree:: + :caption: Tutorials + +.. toctree:: + :caption: Related Products + +.. toctree:: + :caption: Other Links + + Download + CircuitPython Reference Documentation + CircuitPython Support Forum + Discord Chat + Adafruit Learning System + Adafruit Blog + Adafruit Store + +Indices and tables +================== + +* :ref:`genindex` +* :ref:`modindex` +* :ref:`search` diff --git a/examples/azureiot_device_management.py b/examples/azureiot_device_management.py new file mode 100644 index 0000000..18a2c80 --- /dev/null +++ b/examples/azureiot_device_management.py @@ -0,0 +1,40 @@ +import board +import busio +from digitalio import DigitalInOut +from adafruit_esp32spi import adafruit_esp32spi, adafruit_esp32spi_wifimanager +import neopixel +from adafruit_azureiot import IOT_Hub + +# Get wifi details and more from a secrets.py file +try: + from secrets import secrets +except ImportError: + print("WiFi secrets are kept in secrets.py, please add them there!") + raise + +# ESP32 Setup +try: + esp32_cs = DigitalInOut(board.ESP_CS) + esp32_ready = DigitalInOut(board.ESP_BUSY) + esp32_reset = DigitalInOut(board.ESP_RESET) +except AttributeError: + esp32_cs = DigitalInOut(board.D9) + esp32_ready = DigitalInOut(board.D10) + esp32_reset = DigitalInOut(board.D5) +spi = busio.SPI(board.SCK, board.MOSI, board.MISO) +esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset) +status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2) # Uncomment for Most Boards +"""Uncomment below for ItsyBitsy M4""" +#status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2) +wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light) + +# Create an instance of the Azure IoT Hub +hub = IOT_Hub(wifi, secrets['azure_iot_hub'], secrets['azure_iot_sas'], secrets['device_id']) + +# Enumerate all devices on an Azure IoT Hub +all_hub_devices = hub.get_devices() +print(all_hub_devices) + +# Get a specified device on an Azure IoT Hub +device_data = hub.get_device() +print(device_data) diff --git a/examples/azureiot_devicetwin.py b/examples/azureiot_devicetwin.py new file mode 100644 index 0000000..6430e19 --- /dev/null +++ b/examples/azureiot_devicetwin.py @@ -0,0 +1,47 @@ +import board +import busio +from digitalio import DigitalInOut +from adafruit_esp32spi import adafruit_esp32spi, adafruit_esp32spi_wifimanager +import neopixel +from adafruit_azureiot import IOT_Hub + +# Get wifi details and more from a secrets.py file +try: + from secrets import secrets +except ImportError: + print("WiFi secrets are kept in secrets.py, please add them there!") + raise + +# ESP32 Setup +try: + esp32_cs = DigitalInOut(board.ESP_CS) + esp32_ready = DigitalInOut(board.ESP_BUSY) + esp32_reset = DigitalInOut(board.ESP_RESET) +except AttributeError: + esp32_cs = DigitalInOut(board.D9) + esp32_ready = DigitalInOut(board.D10) + esp32_reset = DigitalInOut(board.D5) +spi = busio.SPI(board.SCK, board.MOSI, board.MISO) +esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset) +status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2) # Uncomment for Most Boards +"""Uncomment below for ItsyBitsy M4""" +#status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2) +wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light) + +# Create an instance of the Azure IoT Hub +hub = IOT_Hub(wifi, secrets['azure_iot_hub'], secrets['azure_iot_sas'], secrets['device_id']) + +# Get a Device Twin +device_twin = hub.get_device_twin() +# Filter out the device's name from the twin's properties +device_name = device_twin['properties']['desired']['deviceName'] +print(device_name) + +# Update a Device Twin's Properties +data = {"properties":{"desired": {"deviceName": "{{BasementTemperatureLoggerFeather}}"}}} +hub.update_device_twin(data) + +# And read the updated device twin information +device_twin = hub.get_device_twin() +device_name = device_twin['properties']['desired']['deviceName'] +print(device_name) diff --git a/examples/azureiot_simpletest.py b/examples/azureiot_simpletest.py new file mode 100644 index 0000000..3939724 --- /dev/null +++ b/examples/azureiot_simpletest.py @@ -0,0 +1,49 @@ +from random import randint +import board +import busio +from digitalio import DigitalInOut +from adafruit_esp32spi import adafruit_esp32spi, adafruit_esp32spi_wifimanager +import neopixel +from adafruit_azureiot import IOT_Hub + +# Get wifi details and more from a secrets.py file +try: + from secrets import secrets +except ImportError: + print("WiFi secrets are kept in secrets.py, please add them there!") + raise + +# ESP32 Setup +try: + esp32_cs = DigitalInOut(board.ESP_CS) + esp32_ready = DigitalInOut(board.ESP_BUSY) + esp32_reset = DigitalInOut(board.ESP_RESET) +except AttributeError: + esp32_cs = DigitalInOut(board.D9) + esp32_ready = DigitalInOut(board.D10) + esp32_reset = DigitalInOut(board.D5) +spi = busio.SPI(board.SCK, board.MOSI, board.MISO) +esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset) +status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2) # Uncomment for Most Boards +"""Uncomment below for ItsyBitsy M4""" +#status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2) +wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light) + +# Create an instance of the Azure IoT Hub +hub = IOT_Hub(wifi, secrets['azure_iot_hub'], secrets['azure_iot_sas'], secrets['device_id']) + +# Send a Device-to-Cloud message +print('Sending Data to Azure IoT Hub...') +data = randint(0, 100) +hub.send_device_message(str(data)) +print('Data Sent!') + +# Receive a Cloud-to-Device message +# NOTE: HTTP Cloud-to-Device messages are HEAVILY throttled over HTTP. +# Microsoft suggests a polling interval of the below code for every 25 minutes. +print('Receiving a message from an Azure IoT Hub...') +message = hub.get_hub_message() +if message == -1: + print('IoT Hub Message Queue is empty!') +else: + print(message) diff --git a/requirements.txt b/requirements.txt new file mode 100644 index 0000000..bdc2de0 --- /dev/null +++ b/requirements.txt @@ -0,0 +1,2 @@ +Adafruit-Blinka +Adafruit_CircuitPython_ESP32SPI \ No newline at end of file diff --git a/setup.py b/setup.py new file mode 100644 index 0000000..430c025 --- /dev/null +++ b/setup.py @@ -0,0 +1,64 @@ +"""A setuptools based setup module. + +See: +https://packaging.python.org/en/latest/distributing.html +https://github.com/pypa/sampleproject +""" + +from setuptools import setup, find_packages +# To use a consistent encoding +from codecs import open +from os import path + +here = path.abspath(path.dirname(__file__)) + +# Get the long description from the README file +with open(path.join(here, 'README.rst'), encoding='utf-8') as f: + long_description = f.read() + +setup( + name='adafruit-circuitpython-azureiot', + + use_scm_version=True, + setup_requires=['setuptools_scm'], + + description='Access to Microsoft Azure IoT from CircuitPython', + long_description=long_description, + long_description_content_type='text/x-rst', + + # The project's main homepage. + url='https://github.com/adafruit/Adafruit_CircuitPython_AzureIoT', + + # Author details + author='Adafruit Industries', + author_email='circuitpython@adafruit.com', + + install_requires=[ + 'Adafruit-Blinka', + 'Adafruit_CircuitPython_ESP32SPI' + ], + + # Choose your license + license='MIT', + + # See https://pypi.python.org/pypi?%3Aaction=list_classifiers + classifiers=[ + 'Development Status :: 3 - Alpha', + 'Intended Audience :: Developers', + 'Topic :: Software Development :: Libraries', + 'Topic :: System :: Hardware', + 'License :: OSI Approved :: MIT License', + 'Programming Language :: Python :: 3', + 'Programming Language :: Python :: 3.4', + 'Programming Language :: Python :: 3.5', + ], + + # What does your project relate to? + keywords='adafruit blinka circuitpython micropython azureiot azure, iot, device, services', + + # You can just specify the packages manually here if your project is + # simple. Or you can use find_packages(). + # TODO: IF LIBRARY FILES ARE A PACKAGE FOLDER, + # CHANGE `py_modules=['...']` TO `packages=['...']` + py_modules=['adafruit_azureiot'], +)