diff --git a/examples/adxl34x_freefall_detection_test.py b/examples/adxl34x_freefall_detection_test.py
index 5689463..ea75a4f 100644
--- a/examples/adxl34x_freefall_detection_test.py
+++ b/examples/adxl34x_freefall_detection_test.py
@@ -5,12 +5,17 @@
 
 i2c = busio.I2C(board.SCL, board.SDA)
 
-accelerometer = adafruit_adxl34x.ADXL345(i2c)
+# For ADXL343
+accelerometer = adafruit_adxl34x.ADXL343(i2c)
+# For ADXL345
+# accelerometer = adafruit_adxl34x.ADXL345(i2c)
+
 accelerometer.enable_freefall_detection()
 # alternatively you can specify attributes when you enable freefall detection for more control:
 # accelerometer.enable_freefall_detection(threshold=10,time=25)
+
 while True:
-    print("%f %f %f"%accelerometer.acceleration)
+    print("%f %f %f" % accelerometer.acceleration)
 
-    print("Dropped: %s"%accelerometer.events["freefall"])
+    print("Dropped: %s" % accelerometer.events["freefall"])
     time.sleep(0.5)
diff --git a/examples/adxl34x_motion_detection_test.py b/examples/adxl34x_motion_detection_test.py
index f555d98..9e58b3a 100644
--- a/examples/adxl34x_motion_detection_test.py
+++ b/examples/adxl34x_motion_detection_test.py
@@ -5,12 +5,17 @@
 
 i2c = busio.I2C(board.SCL, board.SDA)
 
-accelerometer = adafruit_adxl34x.ADXL345(i2c)
+# For ADXL343
+accelerometer = adafruit_adxl34x.ADXL343(i2c)
+# For ADXL345
+# accelerometer = adafruit_adxl34x.ADXL345(i2c)
+
 accelerometer.enable_motion_detection()
 # alternatively you can specify the threshold when you enable motion detection for more control:
 # accelerometer.enable_motion_detection(threshold=10)
+
 while True:
-    print("%f %f %f"%accelerometer.acceleration)
+    print("%f %f %f" % accelerometer.acceleration)
 
-    print("Motion detected: %s"%accelerometer.events['motion'])
+    print("Motion detected: %s" % accelerometer.events['motion'])
     time.sleep(0.5)
diff --git a/examples/adxl34x_tap_detection_test.py b/examples/adxl34x_tap_detection_test.py
index 41a0914..64cf468 100644
--- a/examples/adxl34x_tap_detection_test.py
+++ b/examples/adxl34x_tap_detection_test.py
@@ -5,12 +5,17 @@
 
 i2c = busio.I2C(board.SCL, board.SDA)
 
-accelerometer = adafruit_adxl34x.ADXL345(i2c)
+# For ADXL343
+accelerometer = adafruit_adxl34x.ADXL343(i2c)
+# For ADXL345
+# accelerometer = adafruit_adxl34x.ADXL345(i2c)
+
 accelerometer.enable_tap_detection()
 # you can also configure the tap detection parameters when you enable tap detection:
 # accelerometer.enable_tap_detection(tap_count=2,threshold=20, duration=50)
+
 while True:
-    print("%f %f %f"%accelerometer.acceleration)
+    print("%f %f %f" % accelerometer.acceleration)
 
-    print("Tapped: %s"%accelerometer.events['tap'])
+    print("Tapped: %s" % accelerometer.events['tap'])
     time.sleep(0.5)