enable PSRAM with 200Mhz

Author: Jason2866

configs/defconfig.esp32p4

@@ -1,6 +1,38 @@
-CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160=y
-# PSRAM is connected in parallel to Flash chip and max clock is 20Mhz
-# CONFIG_SPIRAM is not set
+CONFIG_IDF_EXPERIMENTAL_FEATURES=y
+
+CONFIG_ULP_COPROC_ENABLED=y
+CONFIG_ULP_COPROC_TYPE_RISCV=y
+CONFIG_ULP_COPROC_RESERVE_MEM=4096
+
+CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_360=y
+CONFIG_COMPILER_ORPHAN_SECTIONS_PLACE=y
+CONFIG_SPIRAM=y
+CONFIG_SPIRAM_SPEED_200M=y
+CONFIG_SPIRAM_XIP_FROM_PSRAM=y
+CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP=y
+CONFIG_RTC_CLK_CAL_CYCLES=576
+# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set
+# CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1 is not set
+CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
+CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=3120
+CONFIG_CACHE_L2_CACHE_256KB=y
+CONFIG_CACHE_L2_CACHE_LINE_128B=y
+
+#
+# Bluetooth
+#
+CONFIG_BT_ENABLED=y
+CONFIG_BT_STACK_NO_LOG=y
+# CONFIG_BT_BLE_42_FEATURES_SUPPORTED is not set
+# CONFIG_BLE_MESH is not set
+CONFIG_BT_NIMBLE_ENABLED=y
+CONFIG_BT_NIMBLE_LOG_LEVEL_NONE=y
+CONFIG_BT_NIMBLE_MAX_CONNECTIONS=1
+# CONFIG_BT_NIMBLE_NVS_PERSIST is not set
+# CONFIG_BT_NIMBLE_CRYPTO_STACK_MBEDTLS is not set
+# CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_2M_PHY is not set
+# CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_CODED_PHY is not set
+# CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT is not set
 
 #
 # PPP